[Wed Feb  1 10:09:42 2012] Detection parameters:
  Position = (300.2, 298.9) = 0 42 52.47 41 15 40.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1502.8 +/- 48.5
  Background counts = 41.3
  Rate = 0.07 +/- 0.002

[Wed Feb  1 10:09:51 2012] Off-axis axis estimate = 0.13'
[Wed Feb  1 16:17:09 2012] Using EEF radius (= 6.49 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 16:17:09 2012] Initial guess for spatial extent in simple fitting = 6.49"
[Wed Feb  1 16:17:09 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.007
[Wed Feb  1 16:17:09 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 6.49"
[Wed Feb  1 19:35:07 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src11.ximg exists
[Wed Feb  1 19:35:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src11.csv
[Wed Feb  1 19:35:07 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Feb  1 19:35:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src11.csv
[Wed Feb  1 19:35:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb  1 19:35:08 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Feb  1 19:35:08 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Feb  1 19:35:08 2012] Fit fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Feb  1 23:02:24 2012] Spatial fit model total counts = 3983.760000, observed total counts = 3978.000000
[Wed Feb  1 23:02:24 2012] Offset between fit and detection position for source 17 = 0.145084 pixels
[Wed Feb  1 23:02:24 2012] 4043.815000 total counts/ 3340.250000 bgd. counts: snr = 12.173480
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.145084 pixels
  Position = (300.2, 298.7) = 0 42 52.47 41 15 39.5
  Extent = 3.8 (3.6-4.1)", rotation angle = 0
  Source counts = 703.6 +/- 63.6
  Background counts = 3340.2
  Rate = 0.03 +/- 0.003
[Wed Feb  1 23:02:24 2012] Vigneting correction estimate = 1.000000
[Wed Feb  1 23:02:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb  1 23:02:24 2012] Assessing source extent using major axis lower bound
[Wed Feb  1 23:02:24 2012] Source does appear to be extended
[Wed Feb  1 23:02:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 03:26:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb  2 03:26:31 2012] Initial guess for spatial extent in simple fitting = 3.82"
[Thu Feb  2 03:26:31 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.185
[Thu Feb  2 03:26:31 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 3.82"
[Thu Feb  2 05:34:46 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src11.ximg exists
[Thu Feb  2 05:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src11.csv
[Thu Feb  2 05:34:46 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Feb  2 05:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src11.csv
[Thu Feb  2 05:34:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb  2 05:34:47 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Feb  2 05:34:47 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Feb  2 05:34:47 2012] Fit fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Feb  2 08:44:38 2012] Warning, spatial fit 11 centroid is now closest to src. 71
[Thu Feb  2 08:44:38 2012] Vigneting correction estimate = 1.000000
[Thu Feb  2 08:44:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  2 08:44:38 2012] Assessing source extent using major axis lower bound
[Thu Feb  2 08:44:38 2012] Source does appear to be extended
[Thu Feb  2 08:44:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 16:22:34 2012] XMMSAS src. selection expression = ellipse(26065.590120, 25941.273000, 229.094407, 229.094407, 0.000000, X, Y)
[Thu Feb  2 16:22:34 2012] Writing source region out to fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src17_src.reg
[Thu Feb  2 16:22:34 2012] Extracting stamp from image fullrun_mos1_xmm0505720601_pi300-10000_cl_sm2.00.img.gz, (287, 286) - (313, 312)
[Thu Feb  2 16:22:34 2012] XMMSAS bgd. selection expression = annulus(26065.590120, 25941.273000, 381.824011, 763.648022, X, Y) && !ellipse(27281.780000, 26842.543400, 469.484814, 469.484814, 0.000000, X, Y) && !ellipse(26983.781201, 25591.731910, 516.900887, 390.568114, 312.511061, X, Y) && !ellipse(25522.025920, 26414.354600, 376.564011, 376.564011, 0.000000, X, Y) && !ellipse(26110.932831, 27279.928955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24771.321869, 25718.235413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26660.104401, 27528.251190, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb  2 16:22:34 2012] Writing fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src17.gif
[Thu Feb  2 16:26:19 2012] Mean detx,y = (-1291.76, -1268.34) 
[Thu Feb  2 16:26:20 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb  2 16:26:27 2012] Binned source spectrum to 10 counts/bin
[Thu Feb  2 16:26:27 2012] Setting source spectrum file to fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Feb  2 16:26:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Thu Feb  2 22:57:27 2012] Updating aperture counts using extracted products
[Thu Feb  2 22:57:27 2012] Error reading totcts from fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Feb  2 22:57:28 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 22:57:28 2012] Using photon index=1.80, rate=0.0326, arf fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src17.arf
[Thu Feb  2 22:57:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 22:57:28 2012] Updating source flux to 4.6e-13