[Wed Feb  1 10:09:42 2012] Detection parameters:
  Position = (325.8, 301.1) = 0 42 42.60 41 15 48.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1167.7 +/- 46.9
  Background counts = 45.2
  Rate = 0.05 +/- 0.002

[Wed Feb  1 10:09:51 2012] Off-axis axis estimate = 1.99'
[Wed Feb  1 16:17:09 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Wed Feb  1 16:17:09 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Wed Feb  1 16:17:09 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.822
[Wed Feb  1 16:17:09 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 7.42"
[Wed Feb  1 19:35:07 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src17.ximg exists
[Wed Feb  1 19:35:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src17.csv
[Wed Feb  1 19:35:07 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed Feb  1 19:35:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src17.csv
[Wed Feb  1 19:35:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb  1 19:35:08 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed Feb  1 19:35:08 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Feb  1 19:35:08 2012] Fit fullrun_mos1_xmm0505720601_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Wed Feb  1 23:02:24 2012] Source 16 is offset by 4.295772 and -3.887324 pixels which is larger than
2 X fitted extent = 2.078235 x 2.078235, not incorporating fit results
[Wed Feb  1 23:02:24 2012] Spatial fit model total counts = 4405.120000, observed total counts = 4414.000000
[Wed Feb  1 23:02:24 2012] Offset between fit and detection position for source 16 = 0.736982 pixels
[Wed Feb  1 23:02:24 2012] Warning, changing simple spatial fit ID from 17 to 41
[Wed Feb  1 23:02:24 2012] 3712.969000 total counts/ 3291.570000 bgd. counts: snr = 7.345003
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.736982 pixels
  Position = (325.6, 300.3) = 0 42 42.65 41 15 46.4
  Extent = 6.7 (5.8-8.2)", rotation angle = 0
  Source counts = 421.4 +/- 60.9
  Background counts = 3291.6
  Rate = 0.02 +/- 0.003
[Wed Feb  1 23:02:24 2012] Vigneting correction estimate = 1.000000
[Wed Feb  1 23:02:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb  1 23:02:24 2012] Assessing source extent using major axis lower bound
[Wed Feb  1 23:02:24 2012] Source does appear to be extended
[Wed Feb  1 23:02:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 03:26:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb  2 03:26:31 2012] Initial guess for spatial extent in simple fitting = 6.71"
[Thu Feb  2 03:26:31 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.960
[Thu Feb  2 03:26:31 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 6.71"
[Thu Feb  2 05:34:46 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src17.ximg exists
[Thu Feb  2 05:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src17.csv
[Thu Feb  2 05:34:46 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src17_1.ximg exists
[Thu Feb  2 05:34:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src17.csv
[Thu Feb  2 05:34:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb  2 05:34:48 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Thu Feb  2 05:34:48 2012] fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Thu Feb  2 05:34:48 2012] Fit fullrun_mos1_xmm0505720601_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Thu Feb  2 08:44:38 2012] Warning, spatial fit 17 centroid is now closest to src. 45
[Thu Feb  2 08:44:38 2012] Vigneting correction estimate = 1.000000
[Thu Feb  2 08:44:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb  2 08:44:38 2012] Assessing source extent using major axis lower bound
[Thu Feb  2 08:44:38 2012] Source does appear to be extended
[Thu Feb  2 08:44:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb  2 16:22:34 2012] XMMSAS src. selection expression = ellipse(28281.926000, 26080.630000, 402.394212, 402.394212, 0.000000, X, Y)
[Thu Feb  2 16:22:34 2012] Writing source region out to fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src16_src.reg
[Thu Feb  2 16:22:34 2012] Extracting stamp from image fullrun_mos1_xmm0505720601_pi300-10000_cl_sm2.00.img.gz, (303, 277) - (349, 323)
[Thu Feb  2 16:22:35 2012] XMMSAS bgd. selection expression = annulus(28281.926000, 26080.630000, 670.657019, 1341.314039, X, Y) && !ellipse(29202.675740, 26416.702400, 399.712812, 399.712812, 0.000000, X, Y) && !ellipse(27281.780000, 26842.543400, 469.484814, 469.484814, 0.000000, X, Y) && !ellipse(27914.250200, 26498.453600, 363.196010, 363.196010, 0.000000, X, Y) && !ellipse(26983.781201, 25591.731910, 516.900887, 390.568114, 312.511061, X, Y) && !ellipse(28348.346000, 24829.746800, 291.492808, 291.492808, 0.000000, X, Y) && !ellipse(28970.687000, 24518.284600, 326.392809, 326.392809, 0.000000, X, Y) && !ellipse(27786.981140, 25622.773834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30247.362274, 26741.021729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26110.932831, 27279.928955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26660.104401, 27528.251190, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb  2 16:22:35 2012] Writing fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src16.gif
[Thu Feb  2 16:27:51 2012] Mean detx,y = (230.63, 332.95) 
[Thu Feb  2 16:27:52 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb  2 16:28:00 2012] Binned source spectrum to 10 counts/bin
[Thu Feb  2 16:28:00 2012] Setting source spectrum file to fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu Feb  2 16:28:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Thu Feb  2 22:57:27 2012] Updating aperture counts using extracted products
[Thu Feb  2 22:57:27 2012] Error reading totcts from fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu Feb  2 22:57:28 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb  2 22:57:28 2012] Using photon index=1.80, rate=0.0195, arf fullrun_mos1_xmm0505720601_pi300-10000_pass1_cl_src16.arf
[Thu Feb  2 22:57:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb  2 22:57:28 2012] Updating source flux to 2.2e-13
[Thu Feb  2 22:57:32 2012] Flag b found in src. 16 procflags, skipping spectral fitting