[Sat Feb 25 10:17:03 2012] Detection parameters:
  Position = (361.7, 286.3) = 0 42 28.24 41 14 38.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.2 +/- 18.9
  Background counts = 147.5
  Rate = 0.005 +/- 0.001

[Sat Feb 25 10:17:05 2012] Off-axis axis estimate = 4.67'
[Sat Feb 25 10:22:34 2012] Using EEF radius (= 8.76 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 10:22:34 2012] Initial guess for spatial extent in simple fitting = 8.76"
[Sat Feb 25 10:22:34 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.989
[Sat Feb 25 10:22:34 2012] Giving source the simple spatial ID 94 for pass 0, mean size = 8.76"
[Sat Feb 25 19:05:26 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src94.ximg exists
[Sat Feb 25 19:05:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src94.csv
[Sat Feb 25 19:05:26 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src94_1.ximg exists
[Sat Feb 25 19:05:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src94.csv
[Sat Feb 25 19:05:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src94_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 19:05:29 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src94.ximg exists
[Sat Feb 25 19:05:29 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src94_1.ximg exists
[Sat Feb 25 19:05:29 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src94 appears to have run properly
[Sun Feb 26 05:58:03 2012] Source 97 is offset by -4.992357 and 1.315691 pixels which is larger than
2 X fitted extent = 3.498570 x 3.498570, not incorporating fit results
[Sun Feb 26 05:58:03 2012] Spatial fit model total counts = 748.253000, observed total counts = 745.000000
[Sun Feb 26 05:58:03 2012] Offset between fit and detection position for source 97 = 1.380857 pixels
[Sun Feb 26 05:58:03 2012] 702.998000 total counts/ 584.922000 bgd. counts: snr = 4.882167
Spatial fit parameters:
  Offset between fit and detection position for source 97 = 1.380857 pixels
  Position = (360.3, 286.5) = 0 42 28.77 41 14 38.3
  Extent = 9.4 (7.4-12.0)", rotation angle = 0
  Source counts = 118.1 +/- 26.5
  Background counts = 584.9
  Rate = 0.009 +/- 0.002
[Sun Feb 26 05:58:03 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:03 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 05:58:03 2012] Source does appear to be extended
[Sun Feb 26 05:58:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 05:58:03 2012] Source is confused with source 100
[Sun Feb 26 05:59:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 05:59:38 2012] Initial guess for spatial extent in simple fitting = 9.38"
[Sun Feb 26 05:59:38 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.885
[Sun Feb 26 05:59:38 2012] Giving source the simple spatial ID 88 for pass 1, mean size = 9.38"
[Sun Feb 26 13:33:46 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src88.ximg exists
[Sun Feb 26 13:33:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src88.csv
[Sun Feb 26 13:33:46 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src88_1.ximg exists
[Sun Feb 26 13:33:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src88.csv
[Sun Feb 26 13:33:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src88_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 13:33:49 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src88.ximg exists
[Sun Feb 26 13:33:49 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src88_1.ximg exists
[Sun Feb 26 13:33:49 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src88 appears to have run properly
[Mon Feb 27 00:35:59 2012] Warning, spatial fit 88 centroid is now closest to src. 44
[Mon Feb 27 00:35:59 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:35:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:35:59 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 00:35:59 2012] Source does appear to be extended
[Mon Feb 27 00:35:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 00:37:32 2012] XMMSAS src. selection expression = ellipse(31296.646200, 24876.827600, 562.979416, 562.979416, 0.000000, X, Y)
[Mon Feb 27 00:37:32 2012] Writing source region out to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src97_src.reg
[Mon Feb 27 00:37:32 2012] Extracting stamp from image fullrun_pn_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (328, 254) - (393, 319)
[Mon Feb 27 00:37:32 2012] XMMSAS bgd. selection expression = annulus(31296.646200, 24876.827600, 938.299027, 1876.598054, X, Y) && !ellipse(29085.045660, 26554.041400, 409.526412, 409.526412, 0.000000, X, Y) && !ellipse(29590.101807, 27045.003998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30145.345428, 26842.852722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32947.729800, 26533.330800, 330.277610, 330.277610, 0.000000, X, Y) && !ellipse(30776.350311, 26920.730042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32619.829000, 25998.178000, 382.640811, 382.640811, 0.000000, X, Y) && !ellipse(30011.172000, 25260.046000, 1209.288035, 1209.288035, 0.000000, X, Y) && !ellipse(29447.508148, 24645.226562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32605.267242, 24189.822662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32141.869049, 23678.655182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29511.794373, 23990.252075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30547.441600, 23168.933440, 522.689615, 422.802412, 339.470400, X, Y) && !ellipse(31158.300000, 24722.660000, 1401.936040, 1401.936040, 0.000000, X, Y)
[Mon Feb 27 00:37:32 2012] Writing fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src97.gif
[Mon Feb 27 02:50:09 2012] Mean detx,y = (4072.91, -535.07) 
[Mon Feb 27 02:50:14 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 02:50:38 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 02:50:39 2012] Setting source spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src97_src_b10.pi.gz
[Mon Feb 27 02:50:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src97_bgd.pi.gz
[Mon Feb 27 22:00:32 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:32 2012] Error reading totcts from fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src97_src_b10.pi.gz
[Mon Feb 27 22:00:38 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:38 2012] Using photon index=1.80, rate=0.0091, arf fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src97.arf
[Mon Feb 27 22:00:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:38 2012] Updating source flux to 2.8e-14
[Mon Feb 27 22:20:42 2012] Flag b found in src. 97 procflags, skipping spectral fitting
[Mon Feb 27 22:20:42 2012] Flag c found in src. 97 procflags, skipping spectral fitting