[Sat Feb 25 10:17:02 2012] Detection parameters:
  Position = (361.7, 255.2) = 0 42 28.26 41 12 22.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3067.0 +/- 69.0
  Background counts = 126.7
  Rate = 0.2 +/- 0.005

[Sat Feb 25 10:17:05 2012] Off-axis axis estimate = 5.55'
[Sat Feb 25 10:22:34 2012] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 10:22:34 2012] Initial guess for spatial extent in simple fitting = 9.21"
[Sat Feb 25 10:22:34 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.913
[Sat Feb 25 10:22:34 2012] Giving source the simple spatial ID 75 for pass 0, mean size = 9.21"
[Sat Feb 25 19:05:26 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src75.ximg exists
[Sat Feb 25 19:05:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src75.csv
[Sat Feb 25 19:05:26 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src75_1.ximg exists
[Sat Feb 25 19:05:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src75.csv
[Sat Feb 25 19:05:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 19:05:29 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Sat Feb 25 19:05:29 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Sat Feb 25 19:05:29 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src75 appears to have run properly
[Sun Feb 26 05:58:03 2012] Spatial fit model total counts = 2490.880000, observed total counts = 2488.000000
[Sun Feb 26 05:58:03 2012] Offset between fit and detection position for source 78 = 0.118310 pixels
[Sun Feb 26 05:58:03 2012] 2499.136000 total counts/ 928.766000 bgd. counts: snr = 51.528658
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 0.118310 pixels
  Position = (361.7, 255.3) = 0 42 28.26 41 12 22.5
  Extent = 5.5 (5.3-5.8)", rotation angle = 0
  Source counts = 1570.4 +/- 50.0
  Background counts = 928.8
  Rate = 0.1 +/- 0.004
[Sun Feb 26 05:58:03 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:03 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 05:58:03 2012] Source does appear to be extended
[Sun Feb 26 05:58:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 05:59:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 05:59:38 2012] Initial guess for spatial extent in simple fitting = 5.51"
[Sun Feb 26 05:59:38 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.721
[Sun Feb 26 05:59:38 2012] Giving source the simple spatial ID 70 for pass 1, mean size = 5.51"
[Sun Feb 26 13:33:46 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src70.ximg exists
[Sun Feb 26 13:33:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src70.csv
[Sun Feb 26 13:33:46 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src70_1.ximg exists
[Sun Feb 26 13:33:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src70.csv
[Sun Feb 26 13:33:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 13:33:48 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Sun Feb 26 13:33:48 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Sun Feb 26 13:33:48 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src70 appears to have run properly
[Mon Feb 27 00:35:59 2012] Spatial fit model total counts = 2487.310000, observed total counts = 2489.000000
[Mon Feb 27 00:35:59 2012] Offset between fit and detection position for source 78 = 0.007856 pixels
[Mon Feb 27 00:35:59 2012] 2501.581000 total counts/ 954.781000 bgd. counts: snr = 50.059013
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 0.007856 pixels
  Position = (361.7, 255.3) = 0 42 28.26 41 12 22.5
  Extent = 5.4 (5.2-5.7)", rotation angle = 0
  Source counts = 1546.8 +/- 50.0
  Background counts = 954.8
  Rate = 0.1 +/- 0.004
[Mon Feb 27 00:35:59 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:35:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:35:59 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 00:35:59 2012] Source does appear to be extended
[Mon Feb 27 00:35:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 00:37:30 2012] Counts = 1546.800000, rescaling region sizes by 2.000000
[Mon Feb 27 00:37:30 2012] XMMSAS src. selection expression = ellipse(31416.054000, 22160.646400, 652.657219, 652.657219, 0.000000, X, Y)
[Mon Feb 27 00:37:30 2012] Writing source region out to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src78_src.reg
[Mon Feb 27 00:37:30 2012] Extracting stamp from image fullrun_pn_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (324, 218) - (399, 293)
[Mon Feb 27 00:37:30 2012] XMMSAS bgd. selection expression = annulus(31416.054000, 22160.646400, 2175.524063, 4351.048125, X, Y) && !ellipse(29085.045660, 26554.041400, 409.526412, 409.526412, 0.000000, X, Y) && !ellipse(35352.206000, 27896.862000, 1698.640049, 1698.640049, 0.000000, X, Y) && !ellipse(29590.101807, 27045.003998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27433.742000, 26933.814000, 1140.176033, 720.917621, 0.000000, X, Y) && !ellipse(30145.345428, 26842.852722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27711.734000, 26802.884000, 787.297623, 787.297623, 0.000000, X, Y) && !ellipse(32947.729800, 26533.330800, 330.277610, 330.277610, 0.000000, X, Y) && !ellipse(30776.350311, 26920.730042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28217.876465, 26315.794891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32619.829000, 25998.178000, 382.640811, 382.640811, 0.000000, X, Y) && !ellipse(30011.172000, 25260.046000, 1209.288035, 1209.288035, 0.000000, X, Y) && !ellipse(27264.399689, 24851.384277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28259.662600, 24967.852400, 392.293611, 392.293611, 0.000000, X, Y) && !ellipse(26876.899800, 25757.349000, 513.374415, 513.374415, 0.000000, X, Y) && !ellipse(29447.508148, 24645.226562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33626.483760, 24199.467200, 331.384810, 331.384810, 0.000000, X, Y) && !ellipse(32605.267242, 24189.822662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28015.958000, 24904.842000, 1138.360033, 1138.360033, 0.000000, X, Y) && !ellipse(32141.869049, 23678.655182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27595.553528, 24241.468292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29511.794373, 23990.252075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28632.736000, 23416.571200, 444.216013, 444.216013, 0.000000, X, Y) && !ellipse(30547.441600, 23168.933440, 522.689615, 422.802412, 339.470400, X, Y) && !ellipse(34392.832092, 22363.465179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27657.341600, 21268.146600, 332.699210, 332.699210, 0.000000, X, Y) && !ellipse(35150.588074, 20288.468185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31435.663116, 19287.250000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31296.646200, 24876.827600, 750.639222, 750.639222, 0.000000, X, Y) && !ellipse(26989.118286, 24315.055084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31158.300000, 24722.660000, 1401.936040, 1401.936040, 0.000000, X, Y)
[Mon Feb 27 00:37:30 2012] Writing fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src78.gif
[Mon Feb 27 02:23:40 2012] Mean detx,y = (5600.39, 1598.76) 
[Mon Feb 27 02:23:47 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 02:25:03 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 02:25:04 2012] Setting source spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Mon Feb 27 02:25:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src78_bgd.pi.gz
[Mon Feb 27 22:00:30 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:30 2012] Error reading totcts from fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Mon Feb 27 22:00:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:37 2012] Using photon index=1.80, rate=0.119, arf fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src78.arf
[Mon Feb 27 22:00:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:37 2012] Updating source flux to 3.6e-13