[Sat Feb 25 10:17:00 2012] Detection parameters:
  Position = (370.0, 272.7) = 0 42 25.03 41 13 38.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 229.6 +/- 24.8
  Background counts = 130.4
  Rate = 0.02 +/- 0.002

[Sat Feb 25 10:17:05 2012] Off-axis axis estimate = 5.51'
[Sat Feb 25 10:22:34 2012] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 10:22:34 2012] Initial guess for spatial extent in simple fitting = 9.19"
[Sat Feb 25 10:22:34 2012] source mask rpix=2.1, npix_max = 27, mask sum = 29, frac = 1.063
[Sat Feb 25 10:22:34 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 9.19"
[Sat Feb 25 19:05:26 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src65.ximg exists
[Sat Feb 25 19:05:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src65.csv
[Sat Feb 25 19:05:26 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src65_1.ximg exists
[Sat Feb 25 19:05:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src65.csv
[Sat Feb 25 19:05:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 19:05:29 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Sat Feb 25 19:05:29 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Sat Feb 25 19:05:29 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Sun Feb 26 05:58:03 2012] Source 67 is offset by -7.058953 and 1.123071 pixels which is larger than
2 X fitted extent = 1.986772 x 1.986772, not incorporating fit results
[Sun Feb 26 05:58:03 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:03 2012] Assessing source extent using major
[Sun Feb 26 05:58:03 2012] Source does appear to be extended
[Sun Feb 26 05:58:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 05:59:38 2012] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 05:59:38 2012] Initial guess for spatial extent in simple fitting = 9.19"
[Sun Feb 26 05:59:38 2012] source mask rpix=2.1, npix_max = 27, mask sum = 29, frac = 1.063
[Sun Feb 26 05:59:38 2012] Giving source the simple spatial ID 62 for pass 1, mean size = 9.19"
[Sun Feb 26 13:33:45 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src62.ximg exists
[Sun Feb 26 13:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src62.csv
[Sun Feb 26 13:33:45 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src62_1.ximg exists
[Sun Feb 26 13:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src62.csv
[Sun Feb 26 13:33:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 13:33:48 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Sun Feb 26 13:33:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src62.csv
[Sun Feb 26 13:33:48 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Sun Feb 26 13:33:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src62.csv
[Sun Feb 26 13:33:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 00:35:59 2012] Source 67 is offset by -6.990468 and 1.645209 pixels which is larger than
2 X fitted extent = 1.777430 x 2.540667, not incorporating fit results
[Mon Feb 27 00:35:59 2012] Warning, spatial fit 62 centroid is now closest to src. 65
[Mon Feb 27 00:35:59 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:35:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:35:59 2012] Assessing source extent using major
[Mon Feb 27 00:35:59 2012] Source does appear to be extended
[Mon Feb 27 00:35:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 00:37:29 2012] XMMSAS src. selection expression = ellipse(32141.869049, 23678.655182, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 00:37:29 2012] Writing source region out to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src67_src.reg
[Mon Feb 27 00:37:29 2012] Extracting stamp from image fullrun_pn_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (333, 235) - (408, 310)
[Mon Feb 27 00:37:29 2012] XMMSAS bgd. selection expression = annulus(32141.869049, 23678.655182, 1087.500000, 2175.000000, X, Y) && !ellipse(32619.829000, 25998.178000, 382.640811, 382.640811, 0.000000, X, Y) && !ellipse(30011.172000, 25260.046000, 1209.288035, 1209.288035, 0.000000, X, Y) && !ellipse(29447.508148, 24645.226562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33626.483760, 24199.467200, 331.384810, 331.384810, 0.000000, X, Y) && !ellipse(32605.267242, 24189.822662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29511.794373, 23990.252075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30547.441600, 23168.933440, 522.689615, 422.802412, 339.470400, X, Y) && !ellipse(34392.832092, 22363.465179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31416.054000, 22160.646400, 435.104813, 435.104813, 0.000000, X, Y) && !ellipse(31296.646200, 24876.827600, 750.639222, 750.639222, 0.000000, X, Y) && !ellipse(31158.300000, 24722.660000, 1401.936040, 1401.936040, 0.000000, X, Y)
[Mon Feb 27 00:37:29 2012] Writing fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src67.gif
[Mon Feb 27 02:09:29 2012] Mean detx,y = (5608.78, -176.17) 
[Mon Feb 27 02:09:33 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 02:10:07 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 02:10:08 2012] Setting source spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Mon Feb 27 02:10:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Mon Feb 27 08:42:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 27 08:42:37 2012] rmf not generated due to insufficient counts
[Mon Feb 27 22:00:30 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:30 2012] Error reading totcts from fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Mon Feb 27 22:00:36 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:36 2012] Using photon index=1.80, rate=0.0158, arf fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src67.arf
[Mon Feb 27 22:00:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:37 2012] Updating source flux to 4.9e-14
[Mon Feb 27 22:20:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting