[Sat Feb 25 10:17:00 2012] Detection parameters:
  Position = (332.7, 284.1) = 0 42 39.43 41 14 28.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 935.0 +/- 44.1
  Background counts = 179.8
  Rate = 0.05 +/- 0.003

[Sat Feb 25 10:17:05 2012] Off-axis axis estimate = 2.69'
[Sat Feb 25 10:22:34 2012] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 10:22:34 2012] Initial guess for spatial extent in simple fitting = 7.77"
[Sat Feb 25 10:22:34 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.956
[Sat Feb 25 10:22:34 2012] Giving source the simple spatial ID 64 for pass 0, mean size = 7.77"
[Sat Feb 25 19:05:25 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src64.ximg exists
[Sat Feb 25 19:05:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src64.csv
[Sat Feb 25 19:05:26 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src64_1.ximg exists
[Sat Feb 25 19:05:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src64.csv
[Sat Feb 25 19:05:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src64_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 19:05:29 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Sat Feb 25 19:05:29 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Sat Feb 25 19:05:29 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src64 appears to have run properly
[Sun Feb 26 05:58:03 2012] Spatial fit model total counts = 3862.870000, observed total counts = 3859.000000
[Sun Feb 26 05:58:03 2012] Offset between fit and detection position for source 66 = 8.028327 pixels
[Sun Feb 26 05:58:03 2012] 3934.130000 total counts/ 2387.900000 bgd. counts: snr = 31.642153
Spatial fit parameters:
  Offset between fit and detection position for source 66 = 8.028327 pixels
  Position = (325.9, 288.4) = 0 42 42.06 41 14 46.8
  Extent = 15.5 (15.5-31.1)", rotation angle = 0
  Source counts = 1546.2 +/- 62.7
  Background counts = 2387.9
  Rate = 0.1 +/- 0.005
[Sun Feb 26 05:58:03 2012] Spatial fit model total counts = 2024.890000, observed total counts = 2021.000000
[Sun Feb 26 05:58:03 2012] Offset between fit and detection position for source 66 = 3.639040 pixels
[Sun Feb 26 05:58:03 2012] Warning, changing simple spatial fit ID from 64 to 66
[Sun Feb 26 05:58:03 2012] 1985.054000 total counts/ 1883.310000 bgd. counts: snr = 2.344487
Spatial fit parameters:
  Offset between fit and detection position for source 66 = 3.639040 pixels
  Position = (322.6, 286.8) = 0 42 43.32 41 14 39.8
  Extent = 14.2 (13.0-14.8)", rotation angle = 0
  Source counts = 101.7 +/- 44.6
  Background counts = 1883.3
  Rate = 0.008 +/- 0.003
[Sun Feb 26 05:58:03 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:03 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 05:58:03 2012] Source does appear to be extended
[Sun Feb 26 05:58:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 05:58:03 2012] Source is confused with source 58
[Sun Feb 26 05:59:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 05:59:38 2012] Initial guess for spatial extent in simple fitting = 14.23"
[Sun Feb 26 05:59:38 2012] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.984
[Sun Feb 26 05:59:38 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 14.23"
[Sun Feb 26 13:33:45 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src61.ximg exists
[Sun Feb 26 13:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src61.csv
[Sun Feb 26 13:33:45 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src61_1.ximg exists
[Sun Feb 26 13:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src61.csv
[Sun Feb 26 13:33:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 13:33:48 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Sun Feb 26 13:33:48 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Sun Feb 26 13:33:48 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Mon Feb 27 00:35:59 2012] Warning, spatial fit 61 centroid is now closest to src. 51
[Mon Feb 27 00:35:59 2012] Source 66 is offset by -1.240046 and 0.000000 pixels which is larger than
2 X fitted extent = 1.035572 x 1.035572, not incorporating fit results
[Mon Feb 27 00:35:59 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:35:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:35:59 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 00:35:59 2012] Source does appear to be extended
[Mon Feb 27 00:35:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 00:37:29 2012] XMMSAS src. selection expression = ellipse(28015.958000, 24904.842000, 853.770025, 853.770025, 0.000000, X, Y)
[Mon Feb 27 00:37:29 2012] Writing source region out to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src66_src.reg
[Mon Feb 27 00:37:29 2012] Extracting stamp from image fullrun_pn_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (274, 238) - (372, 336)
[Mon Feb 27 00:37:29 2012] XMMSAS bgd. selection expression = annulus(28015.958000, 24904.842000, 1422.950041, 2845.900082, X, Y) && !ellipse(29085.045660, 26554.041400, 409.526412, 409.526412, 0.000000, X, Y) && !ellipse(29662.002655, 28372.362000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29095.124695, 28326.700806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27535.067119, 28494.098000, 762.839230, 481.380347, 177.469197, X, Y) && !ellipse(25981.220560, 27468.496000, 357.573610, 357.573610, 0.000000, X, Y) && !ellipse(29590.101807, 27045.003998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27433.742000, 26933.814000, 1140.176033, 720.917621, 0.000000, X, Y) && !ellipse(30145.345428, 26842.852722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27711.734000, 26802.884000, 787.297623, 787.297623, 0.000000, X, Y) && !ellipse(25405.856000, 26563.304800, 377.548011, 377.548011, 0.000000, X, Y) && !ellipse(30776.350311, 26920.730042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25958.279266, 26076.977661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24872.972000, 25182.290000, 1111.224032, 1111.224032, 0.000000, X, Y) && !ellipse(28217.876465, 26315.794891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30011.172000, 25260.046000, 1209.288035, 1209.288035, 0.000000, X, Y) && !ellipse(27264.399689, 24851.384277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28259.662600, 24967.852400, 392.293611, 392.293611, 0.000000, X, Y) && !ellipse(26876.899800, 25757.349000, 513.374415, 513.374415, 0.000000, X, Y) && !ellipse(29447.508148, 24645.226562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27595.553528, 24241.468292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29511.794373, 23990.252075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28632.736000, 23416.571200, 444.216013, 444.216013, 0.000000, X, Y) && !ellipse(30547.441600, 23168.933440, 522.689615, 422.802412, 339.470400, X, Y) && !ellipse(24796.701294, 28310.576813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30286.388550, 27700.193542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25282.794678, 27541.183838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25515.959351, 25022.923065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31296.646200, 24876.827600, 750.639222, 750.639222, 0.000000, X, Y) && !ellipse(26989.118286, 24315.055084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25540.308624, 24587.678802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31158.300000, 24722.660000, 1401.936040, 1401.936040, 0.000000, X, Y) && !ellipse(26030.323486, 24406.935028, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 00:37:29 2012] Writing fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src66.gif
[Mon Feb 27 02:08:33 2012] Mean detx,y = (1233.85, 1050.42) 
[Mon Feb 27 02:08:38 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 02:09:12 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 02:09:13 2012] Setting source spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Mon Feb 27 02:09:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Mon Feb 27 22:00:30 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:30 2012] Error reading totcts from fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Mon Feb 27 22:00:36 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:36 2012] Using photon index=1.80, rate=0.00784, arf fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src66.arf
[Mon Feb 27 22:00:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:36 2012] Updating source flux to 1.8e-14
[Mon Feb 27 22:20:42 2012] Flag b found in src. 66 procflags, skipping spectral fitting
[Mon Feb 27 22:20:42 2012] Flag c found in src. 66 procflags, skipping spectral fitting