[Sat Feb 25 10:16:59 2012] Detection parameters:
  Position = (182.5, 287.8) = 0 43 37.33 41 14 43.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1680.5 +/- 50.8
  Background counts = 82.4
  Rate = 0.08 +/- 0.003

[Sat Feb 25 10:17:05 2012] Off-axis axis estimate = 8.44'
[Sat Feb 25 10:22:34 2012] Using EEF radius (= 10.65 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 10:22:34 2012] Initial guess for spatial extent in simple fitting = 10.65"
[Sat Feb 25 10:22:34 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.863
[Sat Feb 25 10:22:34 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 10.65"
[Sat Feb 25 19:05:25 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src61.ximg exists
[Sat Feb 25 19:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src61.csv
[Sat Feb 25 19:05:25 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src61_1.ximg exists
[Sat Feb 25 19:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src61.csv
[Sat Feb 25 19:05:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 19:05:29 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Sat Feb 25 19:05:29 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Sat Feb 25 19:05:29 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Sun Feb 26 05:58:03 2012] Warning: source 61 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 63 at 14.328666 pixels away
[Sun Feb 26 05:58:03 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:03 2012] Assessing source extent using major
[Sun Feb 26 05:58:03 2012] Source does appear to be extended
[Sun Feb 26 05:58:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 05:59:38 2012] Using EEF radius (= 10.65 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 05:59:38 2012] Initial guess for spatial extent in simple fitting = 10.65"
[Sun Feb 26 05:59:38 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.863
[Sun Feb 26 05:59:38 2012] Giving source the simple spatial ID 58 for pass 1, mean size = 10.65"
[Sun Feb 26 13:33:45 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src58.ximg exists
[Sun Feb 26 13:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src58.csv
[Sun Feb 26 13:33:45 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src58_1.ximg exists
[Sun Feb 26 13:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src58.csv
[Sun Feb 26 13:33:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 13:33:47 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Sun Feb 26 13:33:47 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Sun Feb 26 13:33:47 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src58 appears to have run properly
[Mon Feb 27 00:35:59 2012] Warning: source 58 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 63 at 14.328666 pixels away
[Mon Feb 27 00:35:59 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:35:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:35:59 2012] Assessing source extent using major
[Mon Feb 27 00:35:59 2012] Source does appear to be extended
[Mon Feb 27 00:35:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 00:37:29 2012] Counts = 1680.514648, rescaling region sizes by 2.000000
[Mon Feb 27 00:37:29 2012] XMMSAS src. selection expression = ellipse(15833.017059, 24993.813324, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Feb 27 00:37:29 2012] Writing source region out to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src63_src.reg
[Mon Feb 27 00:37:29 2012] Extracting stamp from image fullrun_pn_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (108, 213) - (258, 363)
[Mon Feb 27 00:37:29 2012] XMMSAS bgd. selection expression = annulus(15833.017059, 24993.813324, 4350.000000, 8700.000000, X, Y) && !ellipse(11551.979000, 33812.831600, 794.720023, 259.058407, 304.988966, X, Y) && !ellipse(23528.169250, 32935.066400, 406.562982, 406.562982, 0.000000, X, Y) && !ellipse(22625.870400, 31760.183000, 680.484820, 680.484820, 0.000000, X, Y) && !ellipse(24344.703600, 30482.888800, 440.804813, 440.804813, 0.000000, X, Y) && !ellipse(25307.836914, 29738.324127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17964.609623, 29501.619391, 549.564384, 408.163150, 119.534156, X, Y) && !ellipse(23397.020400, 28987.222600, 426.972812, 426.972812, 0.000000, X, Y) && !ellipse(19519.042023, 28733.143311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12143.075928, 27621.899384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23276.434174, 26450.165924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24298.727320, 26611.082400, 410.530412, 410.530412, 0.000000, X, Y) && !ellipse(24872.972000, 25182.290000, 1111.224032, 1111.224032, 0.000000, X, Y) && !ellipse(23573.358600, 25796.651200, 523.335215, 437.024013, 69.035000, X, Y) && !ellipse(21846.752200, 25138.257600, 380.626411, 380.626411, 0.000000, X, Y) && !ellipse(20992.350967, 16127.646988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16524.996017, 23196.077057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19756.100965, 23823.719580, 514.346388, 415.509308, 78.717967, X, Y) && !ellipse(24730.894400, 20583.952200, 482.692014, 416.180012, 30.925759, X, Y) && !ellipse(16926.716553, 20127.290649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23541.190020, 19593.857700, 344.200507, 344.200507, 0.000000, X, Y) && !ellipse(17653.660919, 16659.815750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22758.989220, 30430.120400, 474.214414, 474.214414, 0.000000, X, Y) && !ellipse(24796.701294, 28310.576813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25282.794678, 27541.183838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24009.529888, 23943.863082, 567.109392, 450.270794, 330.678096, X, Y)
[Mon Feb 27 00:37:29 2012] Writing fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src63.gif
[Mon Feb 27 02:01:50 2012] Mean detx,y = (-8972.89, 7771.79) 
[Mon Feb 27 02:01:56 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 02:06:36 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 02:06:36 2012] Setting source spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Mon Feb 27 02:06:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Mon Feb 27 08:29:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 27 08:29:34 2012] rmf not generated due to insufficient counts
[Mon Feb 27 22:00:30 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:30 2012] Error reading totcts from fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Mon Feb 27 22:00:36 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:36 2012] Using photon index=1.80, rate=0.0842, arf fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src63.arf
[Mon Feb 27 22:00:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:36 2012] Updating source flux to 4e-13
[Mon Feb 27 22:20:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting