[Sat Feb 25 10:16:59 2012] Detection parameters:
  Position = (325.2, 287.9) = 0 42 42.32 41 14 44.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1525.7 +/- 54.2
  Background counts = 182.7
  Rate = 0.09 +/- 0.003

[Sat Feb 25 10:17:05 2012] Off-axis axis estimate = 2.08'
[Sat Feb 25 10:22:34 2012] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 10:22:34 2012] Initial guess for spatial extent in simple fitting = 7.47"
[Sat Feb 25 10:22:34 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.814
[Sat Feb 25 10:22:34 2012] Giving source the simple spatial ID 58 for pass 0, mean size = 7.47"
[Sat Feb 25 19:05:25 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src58.ximg exists
[Sat Feb 25 19:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src58.csv
[Sat Feb 25 19:05:25 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src58_1.ximg exists
[Sat Feb 25 19:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src58.csv
[Sat Feb 25 19:05:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 19:05:29 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Sat Feb 25 19:05:29 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Sat Feb 25 19:05:29 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src58 appears to have run properly
[Sun Feb 26 05:58:03 2012] Spatial fit model total counts = 4254.600000, observed total counts = 4256.000000
[Sun Feb 26 05:58:03 2012] Offset between fit and detection position for source 60 = 0.408130 pixels
[Sun Feb 26 05:58:03 2012] 4324.105000 total counts/ 3873.180000 bgd. counts: snr = 7.245535
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 0.408130 pixels
  Position = (325.3, 287.6) = 0 42 42.25 41 14 43.2
  Extent = 5.0 (4.5-5.6)", rotation angle = 0
  Source counts = 450.9 +/- 65.8
  Background counts = 3873.2
  Rate = 0.03 +/- 0.005
[Sun Feb 26 05:58:03 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:03 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 05:58:03 2012] Source does appear to be extended
[Sun Feb 26 05:58:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 05:58:03 2012] Source is confused with source 66
[Sun Feb 26 05:59:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 05:59:38 2012] Initial guess for spatial extent in simple fitting = 5.04"
[Sun Feb 26 05:59:38 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.818
[Sun Feb 26 05:59:38 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 5.04"
[Sun Feb 26 13:33:45 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src55.ximg exists
[Sun Feb 26 13:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src55.csv
[Sun Feb 26 13:33:45 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src55_1.ximg exists
[Sun Feb 26 13:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src55.csv
[Sun Feb 26 13:33:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 13:33:47 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Sun Feb 26 13:33:47 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Sun Feb 26 13:33:47 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src55 appears to have run properly
[Mon Feb 27 00:35:59 2012] Spatial fit model total counts = 4250.300000, observed total counts = 4256.000000
[Mon Feb 27 00:35:59 2012] Offset between fit and detection position for source 60 = 0.055635 pixels
[Mon Feb 27 00:35:59 2012] 4056.967000 total counts/ 3633.070000 bgd. counts: snr = 7.032722
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 0.055635 pixels
  Position = (325.4, 287.5) = 0 42 42.24 41 14 43.0
  Extent = 4.9 (4.3-5.4)", rotation angle = 0
  Source counts = 423.9 +/- 63.7
  Background counts = 3633.1
  Rate = 0.03 +/- 0.005
[Mon Feb 27 00:35:59 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:35:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:35:59 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 00:35:59 2012] Source does appear to be extended
[Mon Feb 27 00:35:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 00:37:28 2012] XMMSAS src. selection expression = ellipse(28259.662600, 24967.852400, 294.220208, 294.220208, 0.000000, X, Y)
[Mon Feb 27 00:37:28 2012] Writing source region out to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src60_src.reg
[Mon Feb 27 00:37:28 2012] Extracting stamp from image fullrun_pn_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (308, 271) - (342, 304)
[Mon Feb 27 00:37:28 2012] XMMSAS bgd. selection expression = annulus(28259.662600, 24967.852400, 490.367014, 980.734028, X, Y) && !ellipse(27433.742000, 26933.814000, 1140.176033, 720.917621, 0.000000, X, Y) && !ellipse(28217.876465, 26315.794891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30011.172000, 25260.046000, 1209.288035, 1209.288035, 0.000000, X, Y) && !ellipse(27264.399689, 24851.384277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26876.899800, 25757.349000, 513.374415, 513.374415, 0.000000, X, Y) && !ellipse(29447.508148, 24645.226562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28015.958000, 24904.842000, 1138.360033, 1138.360033, 0.000000, X, Y) && !ellipse(27595.553528, 24241.468292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29511.794373, 23990.252075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26989.118286, 24315.055084, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 00:37:28 2012] Writing fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src60.gif
[Mon Feb 27 01:58:47 2012] Mean detx,y = (1419.50, 980.00) 
[Mon Feb 27 01:58:52 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 01:59:16 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 01:59:17 2012] Setting source spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Mon Feb 27 01:59:17 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Mon Feb 27 22:00:30 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:30 2012] Error reading totcts from fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Mon Feb 27 22:00:36 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:36 2012] Using photon index=1.80, rate=0.0327, arf fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src60.arf
[Mon Feb 27 22:00:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:36 2012] Updating source flux to 9.8e-14
[Mon Feb 27 22:20:42 2012] Flag c found in src. 60 procflags, skipping spectral fitting