[Sat Feb 25 10:16:59 2012] Detection parameters:
  Position = (313.9, 286.2) = 0 42 46.65 41 14 37.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 217.2 +/- 29.1
  Background counts = 180.2
  Rate = 0.01 +/- 0.002

[Sat Feb 25 10:17:05 2012] Off-axis axis estimate = 1.43'
[Sat Feb 25 10:22:34 2012] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 10:22:34 2012] Initial guess for spatial extent in simple fitting = 7.14"
[Sat Feb 25 10:22:34 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.871
[Sat Feb 25 10:22:34 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 7.14"
[Sat Feb 25 19:05:25 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src56.ximg exists
[Sat Feb 25 19:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src56.csv
[Sat Feb 25 19:05:25 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src56_1.ximg exists
[Sat Feb 25 19:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src56.csv
[Sat Feb 25 19:05:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 19:05:29 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Sat Feb 25 19:05:29 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Sat Feb 25 19:05:29 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src56 appears to have run properly
[Sun Feb 26 05:58:03 2012] Warning, spatial fit 56 centroid is now closest to src. 61
[Sun Feb 26 05:58:03 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:03 2012] Assessing source extent using major
[Sun Feb 26 05:58:03 2012] Source does appear to be extended
[Sun Feb 26 05:58:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 05:58:03 2012] Source is confused with source 66
[Sun Feb 26 05:58:03 2012] Source is confused with source 98
[Sun Feb 26 05:59:38 2012] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 05:59:38 2012] Initial guess for spatial extent in simple fitting = 7.14"
[Sun Feb 26 05:59:38 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.871
[Sun Feb 26 05:59:38 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 7.14"
[Sun Feb 26 13:33:45 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src53.ximg exists
[Sun Feb 26 13:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src53.csv
[Sun Feb 26 13:33:45 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src53_1.ximg exists
[Sun Feb 26 13:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src53.csv
[Sun Feb 26 13:33:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 13:33:47 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Sun Feb 26 13:33:47 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Sun Feb 26 13:33:47 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Mon Feb 27 00:35:59 2012] Source 58 is offset by 5.014640 and -7.364043 pixels which is larger than
2 X fitted extent = 2.041563 x 2.041563, not incorporating fit results
[Mon Feb 27 00:35:59 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:35:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:35:59 2012] Assessing source extent using major
[Mon Feb 27 00:35:59 2012] Source does appear to be extended
[Mon Feb 27 00:35:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 00:37:28 2012] XMMSAS src. selection expression = ellipse(27264.399689, 24851.384277, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 00:37:28 2012] Writing source region out to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src58_src.reg
[Mon Feb 27 00:37:28 2012] Extracting stamp from image fullrun_pn_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (276, 249) - (351, 324)
[Mon Feb 27 00:37:28 2012] XMMSAS bgd. selection expression = annulus(27264.399689, 24851.384277, 1087.500000, 2175.000000, X, Y) && !ellipse(29085.045660, 26554.041400, 409.526412, 409.526412, 0.000000, X, Y) && !ellipse(29590.101807, 27045.003998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27433.742000, 26933.814000, 1140.176033, 720.917621, 0.000000, X, Y) && !ellipse(30145.345428, 26842.852722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27711.734000, 26802.884000, 787.297623, 787.297623, 0.000000, X, Y) && !ellipse(25405.856000, 26563.304800, 377.548011, 377.548011, 0.000000, X, Y) && !ellipse(25958.279266, 26076.977661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24872.972000, 25182.290000, 1111.224032, 1111.224032, 0.000000, X, Y) && !ellipse(28217.876465, 26315.794891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30011.172000, 25260.046000, 1209.288035, 1209.288035, 0.000000, X, Y) && !ellipse(28259.662600, 24967.852400, 392.293611, 392.293611, 0.000000, X, Y) && !ellipse(26876.899800, 25757.349000, 513.374415, 513.374415, 0.000000, X, Y) && !ellipse(29447.508148, 24645.226562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28015.958000, 24904.842000, 1138.360033, 1138.360033, 0.000000, X, Y) && !ellipse(27595.553528, 24241.468292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29511.794373, 23990.252075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28632.736000, 23416.571200, 444.216013, 444.216013, 0.000000, X, Y) && !ellipse(30286.388550, 27700.193542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25282.794678, 27541.183838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25515.959351, 25022.923065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26989.118286, 24315.055084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25540.308624, 24587.678802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26030.323486, 24406.935028, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 00:37:28 2012] Writing fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src58.gif
[Mon Feb 27 01:56:55 2012] Mean detx,y = (634.24, 1543.27) 
[Mon Feb 27 01:56:59 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 01:57:21 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 01:57:22 2012] Setting source spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Mon Feb 27 01:57:22 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Mon Feb 27 08:12:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 27 08:12:36 2012] rmf not generated due to insufficient counts
[Mon Feb 27 22:00:29 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:29 2012] Error reading totcts from fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Mon Feb 27 22:00:36 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:36 2012] Using photon index=1.80, rate=0.0128, arf fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src58.arf
[Mon Feb 27 22:00:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:36 2012] Updating source flux to 3.1e-14
[Mon Feb 27 22:20:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting