[Sat Feb 25 10:16:59 2012] Detection parameters:
  Position = (349.5, 290.3) = 0 42 32.93 41 14 46.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 181.3 +/- 25.0
  Background counts = 168.0
  Rate = 0.009 +/- 0.001

[Sat Feb 25 10:17:05 2012] Off-axis axis estimate = 3.75'
[Sat Feb 25 10:22:34 2012] Using EEF radius (= 8.30 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 10:22:34 2012] Initial guess for spatial extent in simple fitting = 8.30"
[Sat Feb 25 10:22:34 2012] source mask rpix=1.9, npix_max = 23, mask sum = 10, frac = 0.431
[Sat Feb 25 10:22:34 2012] Skipping simple spatial due to low active detector fraction
[Sun Feb 26 05:58:03 2012] Spatial fit model total counts = 3087.380000, observed total counts = 3087.000000
[Sun Feb 26 05:58:03 2012] Offset between fit and detection position for source 56 = 5.092072 pixels
[Sun Feb 26 05:58:03 2012] Warning, changing simple spatial fit ID from -1 to 60
[Sun Feb 26 05:58:03 2012] 2670.639000 total counts/ 2493.310000 bgd. counts: snr = 3.551335
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 5.092072 pixels
  Position = (344.6, 291.8) = 0 42 34.81 41 15 1.6
  Extent = 16.0 (16.0-32.0)", rotation angle = 0
  Source counts = 177.3 +/- 51.7
  Background counts = 2493.3
  Rate = 0.01 +/- 0.004
[Sun Feb 26 05:58:03 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:03 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 05:58:03 2012] Source does appear to be extended
[Sun Feb 26 05:58:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 05:58:03 2012] Source is confused with source 62
[Sun Feb 26 05:59:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 05:59:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 26 05:59:38 2012] Initial guess for spatial extent in simple fitting = 15.98"
[Sun Feb 26 05:59:38 2012] source mask rpix=3.7, npix_max = 69, mask sum = 70, frac = 1.004
[Sun Feb 26 05:59:38 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 15.98"
[Sun Feb 26 13:33:45 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src51.ximg exists
[Sun Feb 26 13:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src51.csv
[Sun Feb 26 13:33:45 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src51_1.ximg exists
[Sun Feb 26 13:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src51.csv
[Sun Feb 26 13:33:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 13:33:47 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sun Feb 26 13:33:47 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sun Feb 26 13:33:47 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Mon Feb 27 00:35:59 2012] Warning, spatial fit 51 centroid is now closest to src. 100
[Mon Feb 27 00:35:59 2012] Spatial fit model total counts = 3083.540000, observed total counts = 3087.000000
[Mon Feb 27 00:35:59 2012] Offset between fit and detection position for source 56 = 1.278053 pixels
[Mon Feb 27 00:35:59 2012] Warning, changing simple spatial fit ID from 51 to 57
[Mon Feb 27 00:35:59 2012] 2822.323000 total counts/ 2613.140000 bgd. counts: snr = 4.092089
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 1.278053 pixels
  Position = (345.5, 290.9) = 0 42 34.47 41 14 57.5
  Extent = 15.1 (11.7-16.0)", rotation angle = 0
  Source counts = 209.2 +/- 53.1
  Background counts = 2613.1
  Rate = 0.02 +/- 0.004
[Mon Feb 27 00:35:59 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:35:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:35:59 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 00:35:59 2012] Source does appear to be extended
[Mon Feb 27 00:35:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 00:37:28 2012] XMMSAS src. selection expression = ellipse(30011.172000, 25260.046000, 906.966026, 906.966026, 0.000000, X, Y)
[Mon Feb 27 00:37:28 2012] Writing source region out to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src56_src.reg
[Mon Feb 27 00:37:28 2012] Extracting stamp from image fullrun_pn_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (293, 239) - (398, 343)
[Mon Feb 27 00:37:28 2012] XMMSAS bgd. selection expression = annulus(30011.172000, 25260.046000, 1511.610043, 3023.220087, X, Y) && !ellipse(29085.045660, 26554.041400, 409.526412, 409.526412, 0.000000, X, Y) && !ellipse(26960.392000, 28990.722000, 710.403220, 710.403220, 0.000000, X, Y) && !ellipse(29662.002655, 28372.362000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29095.124695, 28326.700806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27535.067119, 28494.098000, 762.839230, 481.380347, 177.469197, X, Y) && !ellipse(29590.101807, 27045.003998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27433.742000, 26933.814000, 1140.176033, 720.917621, 0.000000, X, Y) && !ellipse(30145.345428, 26842.852722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27711.734000, 26802.884000, 787.297623, 787.297623, 0.000000, X, Y) && !ellipse(32947.729800, 26533.330800, 330.277610, 330.277610, 0.000000, X, Y) && !ellipse(30776.350311, 26920.730042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28217.876465, 26315.794891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32619.829000, 25998.178000, 382.640811, 382.640811, 0.000000, X, Y) && !ellipse(27264.399689, 24851.384277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28259.662600, 24967.852400, 392.293611, 392.293611, 0.000000, X, Y) && !ellipse(26876.899800, 25757.349000, 513.374415, 513.374415, 0.000000, X, Y) && !ellipse(29447.508148, 24645.226562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32605.267242, 24189.822662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28015.958000, 24904.842000, 1138.360033, 1138.360033, 0.000000, X, Y) && !ellipse(32141.869049, 23678.655182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27595.553528, 24241.468292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29511.794373, 23990.252075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28632.736000, 23416.571200, 444.216013, 444.216013, 0.000000, X, Y) && !ellipse(30547.441600, 23168.933440, 522.689615, 422.802412, 339.470400, X, Y) && !ellipse(31416.054000, 22160.646400, 435.104813, 435.104813, 0.000000, X, Y) && !ellipse(27927.756104, 29002.785431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30286.388550, 27700.193542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31296.646200, 24876.827600, 750.639222, 750.639222, 0.000000, X, Y) && !ellipse(26989.118286, 24315.055084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31158.300000, 24722.660000, 1401.936040, 1401.936040, 0.000000, X, Y)
[Mon Feb 27 00:37:28 2012] Writing fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src56.gif
[Mon Feb 27 01:54:38 2012] Mean detx,y = (2480.11, -126.58) 
[Mon Feb 27 01:54:45 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 01:55:54 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 01:55:54 2012] Setting source spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Mon Feb 27 01:55:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Mon Feb 27 22:00:29 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:29 2012] Error reading totcts from fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Mon Feb 27 22:00:36 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:36 2012] Using photon index=1.80, rate=0.0161, arf fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src56.arf
[Mon Feb 27 22:00:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:36 2012] Updating source flux to 3.9e-14
[Mon Feb 27 22:20:42 2012] Flag c found in src. 56 procflags, skipping spectral fitting