[Sat Feb 25 10:16:58 2012] Detection parameters:
  Position = (284.5, 295.7) = 0 42 58.02 41 15 27.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 186.7 +/- 22.0
  Background counts = 159.5
  Rate = 0.009 +/- 0.001

[Sat Feb 25 10:17:05 2012] Off-axis axis estimate = 1.03'
[Sat Feb 25 10:22:34 2012] Using EEF radius (= 6.95 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 10:22:34 2012] Initial guess for spatial extent in simple fitting = 6.95"
[Sat Feb 25 10:22:34 2012] source mask rpix=1.6, npix_max = 17, mask sum = 11, frac = 0.626
[Sat Feb 25 10:22:34 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 6.95"
[Sat Feb 25 19:05:25 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src51.ximg exists
[Sat Feb 25 19:05:25 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src51.csv
[Sat Feb 25 19:05:25 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src51_1.ximg exists
[Sat Feb 25 19:05:25 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src51.csv
[Sat Feb 25 19:05:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 19:05:28 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Sat Feb 25 19:05:28 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Sat Feb 25 19:05:28 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Sun Feb 26 05:58:03 2012] Spatial fit model total counts = 1256.890000, observed total counts = 1264.000000
[Sun Feb 26 05:58:03 2012] Offset between fit and detection position for source 52 = 6.025304 pixels
[Sun Feb 26 05:58:03 2012] 1185.158000 total counts/ 885.735000 bgd. counts: snr = 10.060817
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 6.025304 pixels
  Position = (286.5, 290.0) = 0 42 57.25 41 14 53.7
  Extent = 13.9 (13.9-27.8)", rotation angle = 0
  Source counts = 299.4 +/- 34.4
  Background counts = 885.7
  Rate = 0.02 +/- 0.003
[Sun Feb 26 05:58:03 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:03 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 05:58:03 2012] Source does appear to be extended
[Sun Feb 26 05:58:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 05:58:03 2012] Source is confused with source 96
[Sun Feb 26 05:59:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 05:59:38 2012] Initial guess for spatial extent in simple fitting = 13.89"
[Sun Feb 26 05:59:38 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.026
[Sun Feb 26 05:59:38 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 13.89"
[Sun Feb 26 13:33:45 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src47.ximg exists
[Sun Feb 26 13:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src47.csv
[Sun Feb 26 13:33:45 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src47_1.ximg exists
[Sun Feb 26 13:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src47.csv
[Sun Feb 26 13:33:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 13:33:47 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Sun Feb 26 13:33:47 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Sun Feb 26 13:33:47 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Mon Feb 27 00:35:59 2012] Warning, spatial fit 47 centroid is now closest to src. 46
[Mon Feb 27 00:35:59 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:35:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:35:59 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 00:35:59 2012] Source does appear to be extended
[Mon Feb 27 00:35:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 00:37:27 2012] XMMSAS src. selection expression = ellipse(24872.972000, 25182.290000, 833.418024, 833.418024, 0.000000, X, Y)
[Mon Feb 27 00:37:27 2012] Writing source region out to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src52_src.reg
[Mon Feb 27 00:37:27 2012] Extracting stamp from image fullrun_pn_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (239, 242) - (334, 338)
[Mon Feb 27 00:37:27 2012] XMMSAS bgd. selection expression = annulus(24872.972000, 25182.290000, 1389.030040, 2778.060080, X, Y) && !ellipse(27535.067119, 28494.098000, 762.839230, 481.380347, 177.469197, X, Y) && !ellipse(25981.220560, 27468.496000, 357.573610, 357.573610, 0.000000, X, Y) && !ellipse(27433.742000, 26933.814000, 1140.176033, 720.917621, 0.000000, X, Y) && !ellipse(27711.734000, 26802.884000, 787.297623, 787.297623, 0.000000, X, Y) && !ellipse(23276.434174, 26450.165924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25405.856000, 26563.304800, 377.548011, 377.548011, 0.000000, X, Y) && !ellipse(24298.727320, 26611.082400, 410.530412, 410.530412, 0.000000, X, Y) && !ellipse(25958.279266, 26076.977661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28217.876465, 26315.794891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23573.358600, 25796.651200, 523.335215, 437.024013, 69.035000, X, Y) && !ellipse(27264.399689, 24851.384277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21846.752200, 25138.257600, 380.626411, 380.626411, 0.000000, X, Y) && !ellipse(26876.899800, 25757.349000, 513.374415, 513.374415, 0.000000, X, Y) && !ellipse(28015.958000, 24904.842000, 1138.360033, 1138.360033, 0.000000, X, Y) && !ellipse(27595.553528, 24241.468292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24796.701294, 28310.576813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25766.416000, 28554.189800, 684.220820, 684.220820, 0.000000, X, Y) && !ellipse(25282.794678, 27541.183838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25515.959351, 25022.923065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26989.118286, 24315.055084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25540.308624, 24587.678802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26030.323486, 24406.935028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24009.529888, 23943.863082, 567.109392, 450.270794, 330.678096, X, Y)
[Mon Feb 27 00:37:27 2012] Writing fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src52.gif
[Mon Feb 27 01:46:38 2012] Mean detx,y = (-1409.92, 2569.65) 
[Mon Feb 27 01:46:43 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 01:47:24 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 01:47:25 2012] Setting source spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Mon Feb 27 01:47:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Mon Feb 27 22:00:29 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:29 2012] Error reading totcts from fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Mon Feb 27 22:00:35 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:35 2012] Using photon index=1.80, rate=0.0231, arf fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src52.arf
[Mon Feb 27 22:00:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:35 2012] Updating source flux to 6.6e-14
[Mon Feb 27 22:20:42 2012] Flag c found in src. 52 procflags, skipping spectral fitting