[Sat Feb 25 10:16:58 2012] Detection parameters:
  Position = (292.7, 305.7) = 0 42 54.84 41 16 3.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4778.9 +/- 83.3
  Background counts = 163.6
  Rate = 0.3 +/- 0.006

[Sat Feb 25 10:17:05 2012] Off-axis axis estimate = 0.67'
[Sat Feb 25 10:22:34 2012] Using EEF radius (= 6.76 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 10:22:34 2012] Initial guess for spatial extent in simple fitting = 6.76"
[Sat Feb 25 10:22:34 2012] source mask rpix=1.6, npix_max = 16, mask sum = 15, frac = 0.888
[Sat Feb 25 10:22:34 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 6.76"
[Sat Feb 25 19:05:25 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src47.ximg exists
[Sat Feb 25 19:05:25 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src47.csv
[Sat Feb 25 19:05:25 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src47_1.ximg exists
[Sat Feb 25 19:05:25 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src47.csv
[Sat Feb 25 19:05:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 19:05:28 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Sat Feb 25 19:05:28 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Sat Feb 25 19:05:28 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Sun Feb 26 05:58:03 2012] Warning, spatial fit 47 centroid is now closest to src. 51
[Sun Feb 26 05:58:03 2012] Spatial fit model total counts = 8767.960000, observed total counts = 8761.000000
[Sun Feb 26 05:58:03 2012] Offset between fit and detection position for source 48 = 0.319822 pixels
[Sun Feb 26 05:58:03 2012] Warning, changing simple spatial fit ID from 47 to 50
[Sun Feb 26 05:58:03 2012] 9066.060000 total counts/ 7513.590000 bgd. counts: snr = 17.910160
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 0.319822 pixels
  Position = (293.0, 305.8) = 0 42 54.72 41 16 2.4
  Extent = 4.0 (3.8-4.1)", rotation angle = 0
  Source counts = 1552.5 +/- 95.2
  Background counts = 7513.6
  Rate = 0.1 +/- 0.007
[Sun Feb 26 05:58:03 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:03 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 05:58:03 2012] Source does appear to be extended
[Sun Feb 26 05:58:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 05:59:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 05:59:38 2012] Initial guess for spatial extent in simple fitting = 3.96"
[Sun Feb 26 05:59:38 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.754
[Sun Feb 26 05:59:38 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 3.96"
[Sun Feb 26 13:33:45 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src43.ximg exists
[Sun Feb 26 13:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src43.csv
[Sun Feb 26 13:33:45 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src43_1.ximg exists
[Sun Feb 26 13:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src43.csv
[Sun Feb 26 13:33:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 13:33:47 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Sun Feb 26 13:33:47 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Sun Feb 26 13:33:47 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Mon Feb 27 00:35:59 2012] Spatial fit model total counts = 6376.960000, observed total counts = 6974.000000
[Mon Feb 27 00:35:59 2012] Offset between fit and detection position for source 48 = 0.452976 pixels
[Mon Feb 27 00:35:59 2012] 5165.080000 total counts/ 3003.480000 bgd. counts: snr = 39.442366
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 0.452976 pixels
  Position = (292.6, 305.9) = 0 42 54.89 41 16 2.8
  Extent = 4.7 (4.7-4.7)", rotation angle = 0
  Source counts = 2161.6 +/- 71.9
  Background counts = 3003.5
  Rate = 0.2 +/- 0.006
[Mon Feb 27 00:35:59 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:35:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:35:59 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 00:35:59 2012] Source does appear to be extended
[Mon Feb 27 00:35:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 00:37:26 2012] Counts = 2161.600000, rescaling region sizes by 2.000000
[Mon Feb 27 00:37:26 2012] XMMSAS src. selection expression = ellipse(25405.856000, 26563.304800, 566.322016, 566.322016, 0.000000, X, Y)
[Mon Feb 27 00:37:26 2012] Writing source region out to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src48_src.reg
[Mon Feb 27 00:37:26 2012] Extracting stamp from image fullrun_pn_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (260, 273) - (325, 338)
[Mon Feb 27 00:37:27 2012] XMMSAS bgd. selection expression = annulus(25405.856000, 26563.304800, 1887.740054, 3775.480109, X, Y) && !ellipse(29085.045660, 26554.041400, 409.526412, 409.526412, 0.000000, X, Y) && !ellipse(24344.703600, 30482.888800, 440.804813, 440.804813, 0.000000, X, Y) && !ellipse(25939.263400, 29976.672600, 445.185613, 360.616810, 308.860800, X, Y) && !ellipse(25307.836914, 29738.324127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28716.205200, 29787.028600, 410.914412, 350.224810, 25.425500, X, Y) && !ellipse(26960.392000, 28990.722000, 710.403220, 710.403220, 0.000000, X, Y) && !ellipse(25475.143585, 29014.180817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23397.020400, 28987.222600, 426.972812, 426.972812, 0.000000, X, Y) && !ellipse(29662.002655, 28372.362000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29095.124695, 28326.700806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27535.067119, 28494.098000, 762.839230, 481.380347, 177.469197, X, Y) && !ellipse(25981.220560, 27468.496000, 357.573610, 357.573610, 0.000000, X, Y) && !ellipse(29590.101807, 27045.003998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27433.742000, 26933.814000, 1140.176033, 720.917621, 0.000000, X, Y) && !ellipse(27711.734000, 26802.884000, 787.297623, 787.297623, 0.000000, X, Y) && !ellipse(23276.434174, 26450.165924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24298.727320, 26611.082400, 410.530412, 410.530412, 0.000000, X, Y) && !ellipse(25958.279266, 26076.977661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24872.972000, 25182.290000, 1111.224032, 1111.224032, 0.000000, X, Y) && !ellipse(28217.876465, 26315.794891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23573.358600, 25796.651200, 523.335215, 437.024013, 69.035000, X, Y) && !ellipse(30011.172000, 25260.046000, 1209.288035, 1209.288035, 0.000000, X, Y) && !ellipse(27264.399689, 24851.384277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21846.752200, 25138.257600, 380.626411, 380.626411, 0.000000, X, Y) && !ellipse(28259.662600, 24967.852400, 392.293611, 392.293611, 0.000000, X, Y) && !ellipse(26876.899800, 25757.349000, 513.374415, 513.374415, 0.000000, X, Y) && !ellipse(29447.508148, 24645.226562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28015.958000, 24904.842000, 1138.360033, 1138.360033, 0.000000, X, Y) && !ellipse(27595.553528, 24241.468292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29511.794373, 23990.252075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28632.736000, 23416.571200, 444.216013, 444.216013, 0.000000, X, Y) && !ellipse(22758.989220, 30430.120400, 474.214414, 474.214414, 0.000000, X, Y) && !ellipse(27261.160553, 29422.059692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27927.756104, 29002.785431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24796.701294, 28310.576813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25766.416000, 28554.189800, 684.220820, 684.220820, 0.000000, X, Y) && !ellipse(25282.794678, 27541.183838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25515.959351, 25022.923065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26989.118286, 24315.055084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25540.308624, 24587.678802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26030.323486, 24406.935028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24009.529888, 23943.863082, 567.109392, 450.270794, 330.678096, X, Y)
[Mon Feb 27 00:37:27 2012] Writing fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src48.gif
[Mon Feb 27 01:34:12 2012] Mean detx,y = (-1760.29, 1211.94) 
[Mon Feb 27 01:34:18 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 01:35:02 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 01:35:03 2012] Setting source spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Mon Feb 27 01:35:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Mon Feb 27 22:00:29 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:29 2012] Error reading totcts from fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Mon Feb 27 22:00:35 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:35 2012] Using photon index=1.80, rate=0.167, arf fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src48.arf
[Mon Feb 27 22:00:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:35 2012] Updating source flux to 5.7e-13