[Sat Feb 25 10:16:58 2012] Detection parameters:
  Position = (313.1, 311.0) = 0 42 46.99 41 16 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5605.3 +/- 95.5
  Background counts = 170.1
  Rate = 0.3 +/- 0.006

[Sat Feb 25 10:17:05 2012] Off-axis axis estimate = 1.40'
[Sat Feb 25 10:22:34 2012] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 10:22:34 2012] Initial guess for spatial extent in simple fitting = 7.13"
[Sat Feb 25 10:22:34 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.875
[Sat Feb 25 10:22:34 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 7.13"
[Sat Feb 25 19:05:25 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src42.ximg exists
[Sat Feb 25 19:05:25 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src42_1.ximg exists
[Sat Feb 25 19:05:25 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src42 appears to have run properly
[Sat Feb 25 19:05:28 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sat Feb 25 19:05:28 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sat Feb 25 19:05:28 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Sun Feb 26 05:58:03 2012] Spatial fit model total counts = 11424.500000, observed total counts = 11423.000000
[Sun Feb 26 05:58:03 2012] Offset between fit and detection position for source 43 = 2.950947 pixels
[Sun Feb 26 05:58:03 2012] 11217.010000 total counts/ 6892.160000 bgd. counts: snr = 52.094680
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 2.950947 pixels
  Position = (315.9, 310.1) = 0 42 45.90 41 16 21.3
  Extent = 14.3 (14.2-28.5)" x 9.0 (9.0-9.0)", rotation angle = 0 (360-0) degrees
  Source counts = 4324.9 +/- 105.9
  Background counts = 6892.2
  Rate = 0.3 +/- 0.008
[Sun Feb 26 05:58:03 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:03 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 05:58:03 2012] Source does appear to be extended
[Sun Feb 26 05:58:03 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.58
[Sun Feb 26 05:58:03 2012] Source is asymmetric
[Sun Feb 26 05:58:03 2012] Source is confused with source 45
[Sun Feb 26 05:59:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 05:59:38 2012] Initial guess for spatial extent in simple fitting = 11.63"
[Sun Feb 26 05:59:38 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.893
[Sun Feb 26 05:59:38 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 11.63"
[Sun Feb 26 13:33:45 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src38.ximg exists
[Sun Feb 26 13:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src38.csv
[Sun Feb 26 13:33:45 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src38_1.ximg exists
[Sun Feb 26 13:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src38.csv
[Sun Feb 26 13:33:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 13:33:47 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Sun Feb 26 13:33:47 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Sun Feb 26 13:33:47 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src38 appears to have run properly
[Mon Feb 27 00:35:59 2012] Warning, spatial fit 38 centroid is now closest to src. 53
[Mon Feb 27 00:35:59 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:35:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:35:59 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 00:35:59 2012] Source does appear to be extended
[Mon Feb 27 00:35:59 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.58
[Mon Feb 27 00:35:59 2012] Source is asymmetric
[Mon Feb 27 00:37:26 2012] Counts = 4324.850000, rescaling region sizes by 2.000000
[Mon Feb 27 00:37:26 2012] XMMSAS src. selection expression = ellipse(27433.742000, 26933.814000, 1710.264049, 1081.376431, 0.000000, X, Y)
[Mon Feb 27 00:37:26 2012] Writing source region out to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src43_src.reg
[Mon Feb 27 00:37:26 2012] Extracting stamp from image fullrun_pn_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (218, 212) - (414, 408)
[Mon Feb 27 00:37:26 2012] XMMSAS bgd. selection expression = annulus(27433.742000, 26933.814000, 5700.880164, 11401.760328, X, Y) && !ellipse(29085.045660, 26554.041400, 409.526412, 409.526412, 0.000000, X, Y) && !ellipse(26145.711060, 39145.369049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25366.372000, 38276.652000, 683.693620, 683.693620, 0.000000, X, Y) && !ellipse(32267.234222, 36126.948547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23528.169250, 32935.066400, 406.562982, 406.562982, 0.000000, X, Y) && !ellipse(35743.179993, 32252.400574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34303.724400, 31935.654600, 508.281615, 508.281615, 0.000000, X, Y) && !ellipse(22625.870400, 31760.183000, 680.484820, 680.484820, 0.000000, X, Y) && !ellipse(29839.241800, 31393.150400, 434.836813, 434.836813, 0.000000, X, Y) && !ellipse(30733.403920, 30860.307600, 418.920012, 418.920012, 0.000000, X, Y) && !ellipse(24344.703600, 30482.888800, 440.804813, 440.804813, 0.000000, X, Y) && !ellipse(31892.239022, 30379.188139, 446.204813, 444.235322, 42.660033, X, Y) && !ellipse(25939.263400, 29976.672600, 445.185613, 360.616810, 308.860800, X, Y) && !ellipse(25307.836914, 29738.324127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34826.244680, 29627.066000, 454.939213, 454.939213, 0.000000, X, Y) && !ellipse(17964.609623, 29501.619391, 549.564384, 408.163150, 119.534156, X, Y) && !ellipse(28716.205200, 29787.028600, 410.914412, 350.224810, 25.425500, X, Y) && !ellipse(36039.043800, 29196.323600, 437.746413, 437.746413, 0.000000, X, Y) && !ellipse(26960.392000, 28990.722000, 710.403220, 710.403220, 0.000000, X, Y) && !ellipse(35057.022186, 28860.027161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25475.143585, 29014.180817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23397.020400, 28987.222600, 426.972812, 426.972812, 0.000000, X, Y) && !ellipse(19519.042023, 28733.143311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29662.002655, 28372.362000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35591.079584, 28610.581318, 500.979132, 206.915163, 90.000000, X, Y) && !ellipse(29095.124695, 28326.700806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27535.067119, 28494.098000, 762.839230, 481.380347, 177.469197, X, Y) && !ellipse(35352.206000, 27896.862000, 1698.640049, 1698.640049, 0.000000, X, Y) && !ellipse(25981.220560, 27468.496000, 357.573610, 357.573610, 0.000000, X, Y) && !ellipse(29590.101807, 27045.003998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30145.345428, 26842.852722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27711.734000, 26802.884000, 787.297623, 787.297623, 0.000000, X, Y) && !ellipse(23276.434174, 26450.165924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32947.729800, 26533.330800, 330.277610, 330.277610, 0.000000, X, Y) && !ellipse(25405.856000, 26563.304800, 377.548011, 377.548011, 0.000000, X, Y) && !ellipse(30776.350311, 26920.730042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24298.727320, 26611.082400, 410.530412, 410.530412, 0.000000, X, Y) && !ellipse(25958.279266, 26076.977661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24872.972000, 25182.290000, 1111.224032, 1111.224032, 0.000000, X, Y) && !ellipse(28217.876465, 26315.794891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32619.829000, 25998.178000, 382.640811, 382.640811, 0.000000, X, Y) && !ellipse(23573.358600, 25796.651200, 523.335215, 437.024013, 69.035000, X, Y) && !ellipse(30011.172000, 25260.046000, 1209.288035, 1209.288035, 0.000000, X, Y) && !ellipse(27264.399689, 24851.384277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21846.752200, 25138.257600, 380.626411, 380.626411, 0.000000, X, Y) && !ellipse(28259.662600, 24967.852400, 392.293611, 392.293611, 0.000000, X, Y) && !ellipse(26876.899800, 25757.349000, 513.374415, 513.374415, 0.000000, X, Y) && !ellipse(29447.508148, 24645.226562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15833.017059, 24993.813324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33626.483760, 24199.467200, 331.384810, 331.384810, 0.000000, X, Y) && !ellipse(32605.267242, 24189.822662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28015.958000, 24904.842000, 1138.360033, 1138.360033, 0.000000, X, Y) && !ellipse(32141.869049, 23678.655182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27595.553528, 24241.468292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29511.794373, 23990.252075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20992.350967, 16127.646988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28632.736000, 23416.571200, 444.216013, 444.216013, 0.000000, X, Y) && !ellipse(16524.996017, 23196.077057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19756.100965, 23823.719580, 514.346388, 415.509308, 78.717967, X, Y) && !ellipse(30547.441600, 23168.933440, 522.689615, 422.802412, 339.470400, X, Y) && !ellipse(34392.832092, 22363.465179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31416.054000, 22160.646400, 435.104813, 435.104813, 0.000000, X, Y) && !ellipse(27657.341600, 21268.146600, 332.699210, 332.699210, 0.000000, X, Y) && !ellipse(24730.894400, 20583.952200, 482.692014, 416.180012, 30.925759, X, Y) && !ellipse(35150.588074, 20288.468185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16926.716553, 20127.290649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23541.190020, 19593.857700, 344.200507, 344.200507, 0.000000, X, Y) && !ellipse(31435.663116, 19287.250000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17653.660919, 16659.815750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22758.989220, 30430.120400, 474.214414, 474.214414, 0.000000, X, Y) && !ellipse(27261.160553, 29422.059692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27927.756104, 29002.785431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34368.814697, 28913.770264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24796.701294, 28310.576813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25766.416000, 28554.189800, 684.220820, 684.220820, 0.000000, X, Y) && !ellipse(30286.388550, 27700.193542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25282.794678, 27541.183838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25515.959351, 25022.923065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31296.646200, 24876.827600, 750.639222, 750.639222, 0.000000, X, Y) && !ellipse(26989.118286, 24315.055084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25540.308624, 24587.678802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31158.300000, 24722.660000, 1401.936040, 1401.936040, 0.000000, X, Y) && !ellipse(26030.323486, 24406.935028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24009.529888, 23943.863082, 567.109392, 450.270794, 330.678096, X, Y) && !ellipse(32642.573059, 16487.813660, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 00:37:26 2012] Writing fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src43.gif
[Mon Feb 27 01:19:22 2012] Mean detx,y = (-52.71, -163.23) 
[Mon Feb 27 01:19:32 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 01:25:44 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 01:25:45 2012] Setting source spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Mon Feb 27 01:25:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Mon Feb 27 22:00:29 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:29 2012] Error reading totcts from fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Mon Feb 27 22:00:35 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:35 2012] Using photon index=1.80, rate=0.333, arf fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src43.arf
[Mon Feb 27 22:00:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:35 2012] Updating source flux to 7.8e-13
[Mon Feb 27 22:20:42 2012] Flag c found in src. 43 procflags, skipping spectral fitting