[Sat Feb 25 10:16:58 2012] Detection parameters:
  Position = (340.7, 311.4) = 0 42 36.33 41 16 26.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 222.6 +/- 31.5
  Background counts = 157.1
  Rate = 0.01 +/- 0.002

[Sat Feb 25 10:17:05 2012] Off-axis axis estimate = 3.20'
[Sat Feb 25 10:22:34 2012] Using EEF radius (= 8.03 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 10:22:34 2012] Initial guess for spatial extent in simple fitting = 8.03"
[Sat Feb 25 10:22:34 2012] source mask rpix=1.8, npix_max = 22, mask sum = 21, frac = 0.954
[Sat Feb 25 10:22:34 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 8.03"
[Sat Feb 25 19:05:25 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src41.ximg exists
[Sat Feb 25 19:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src41.csv
[Sat Feb 25 19:05:25 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src41_1.ximg exists
[Sat Feb 25 19:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src41.csv
[Sat Feb 25 19:05:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 19:05:28 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sat Feb 25 19:05:28 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sat Feb 25 19:05:28 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Sun Feb 26 05:58:03 2012] Warning, spatial fit 41 centroid is now closest to src. 1
[Sun Feb 26 05:58:03 2012] Source 42 is offset by 1.244044 and 7.768897 pixels which is larger than
2 X fitted extent = 1.817393 x 1.817393, not incorporating fit results
[Sun Feb 26 05:58:03 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:03 2012] Assessing source extent using major
[Sun Feb 26 05:58:03 2012] Source does appear to be extended
[Sun Feb 26 05:58:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 05:58:03 2012] Source is confused with source 44
[Sun Feb 26 05:59:38 2012] Using EEF radius (= 8.03 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 05:59:38 2012] Initial guess for spatial extent in simple fitting = 8.03"
[Sun Feb 26 05:59:38 2012] source mask rpix=1.8, npix_max = 22, mask sum = 21, frac = 0.954
[Sun Feb 26 05:59:38 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 8.03"
[Sun Feb 26 13:33:45 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src37.ximg exists
[Sun Feb 26 13:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src37.csv
[Sun Feb 26 13:33:45 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src37_1.ximg exists
[Sun Feb 26 13:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src37.csv
[Sun Feb 26 13:33:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 13:33:47 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Sun Feb 26 13:33:47 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Sun Feb 26 13:33:47 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Mon Feb 27 00:35:59 2012] Source 42 is offset by 5.679262 and 5.513402 pixels which is larger than
2 X fitted extent = 1.773724 x 1.773724, not incorporating fit results
[Mon Feb 27 00:35:59 2012] Source 42 is offset by 1.244044 and 7.863356 pixels which is larger than
2 X fitted extent = 1.877940 x 1.877940, not incorporating fit results
[Mon Feb 27 00:35:59 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:35:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:35:59 2012] Assessing source extent using major
[Mon Feb 27 00:35:59 2012] Source does appear to be extended
[Mon Feb 27 00:35:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 00:37:25 2012] XMMSAS src. selection expression = ellipse(29590.101807, 27045.003998, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 00:37:25 2012] Writing source region out to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src42_src.reg
[Mon Feb 27 00:37:25 2012] Extracting stamp from image fullrun_pn_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (303, 274) - (378, 349)
[Mon Feb 27 00:37:26 2012] XMMSAS bgd. selection expression = annulus(29590.101807, 27045.003998, 1087.500000, 2175.000000, X, Y) && !ellipse(29085.045660, 26554.041400, 409.526412, 409.526412, 0.000000, X, Y) && !ellipse(26960.392000, 28990.722000, 710.403220, 710.403220, 0.000000, X, Y) && !ellipse(29662.002655, 28372.362000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29095.124695, 28326.700806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27535.067119, 28494.098000, 762.839230, 481.380347, 177.469197, X, Y) && !ellipse(27433.742000, 26933.814000, 1140.176033, 720.917621, 0.000000, X, Y) && !ellipse(30145.345428, 26842.852722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27711.734000, 26802.884000, 787.297623, 787.297623, 0.000000, X, Y) && !ellipse(30776.350311, 26920.730042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28217.876465, 26315.794891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30011.172000, 25260.046000, 1209.288035, 1209.288035, 0.000000, X, Y) && !ellipse(27264.399689, 24851.384277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28259.662600, 24967.852400, 392.293611, 392.293611, 0.000000, X, Y) && !ellipse(29447.508148, 24645.226562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32605.267242, 24189.822662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28015.958000, 24904.842000, 1138.360033, 1138.360033, 0.000000, X, Y) && !ellipse(27595.553528, 24241.468292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27261.160553, 29422.059692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27927.756104, 29002.785431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30286.388550, 27700.193542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31296.646200, 24876.827600, 750.639222, 750.639222, 0.000000, X, Y) && !ellipse(26989.118286, 24315.055084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31158.300000, 24722.660000, 1401.936040, 1401.936040, 0.000000, X, Y)
[Mon Feb 27 00:37:26 2012] Writing fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src42.gif
[Mon Feb 27 01:18:00 2012] Mean detx,y = (1334.89, -1135.17) 
[Mon Feb 27 01:18:06 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 01:18:50 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 01:18:51 2012] Setting source spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Mon Feb 27 01:18:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Mon Feb 27 04:31:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 27 04:31:45 2012] rmf not generated due to insufficient counts
[Mon Feb 27 22:00:28 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:29 2012] Error reading totcts from fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Mon Feb 27 22:00:34 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:34 2012] Using photon index=1.80, rate=0.0144, arf fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src42.arf
[Mon Feb 27 22:00:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:35 2012] Updating source flux to 3.7e-14
[Mon Feb 27 22:20:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting