[Sat Feb 25 10:16:58 2012] Detection parameters:
  Position = (299.4, 315.8) = 0 42 52.27 41 16 48.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 749.1 +/- 38.0
  Background counts = 161.4
  Rate = 0.05 +/- 0.003

[Sat Feb 25 10:17:05 2012] Off-axis axis estimate = 1.26'
[Sat Feb 25 10:22:34 2012] Using EEF radius (= 7.06 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 10:22:34 2012] Initial guess for spatial extent in simple fitting = 7.06"
[Sat Feb 25 10:22:34 2012] source mask rpix=1.6, npix_max = 18, mask sum = 14, frac = 0.777
[Sat Feb 25 10:22:34 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 7.06"
[Sat Feb 25 19:05:25 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src39.ximg exists
[Sat Feb 25 19:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src39.csv
[Sat Feb 25 19:05:25 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src39_1.ximg exists
[Sat Feb 25 19:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src39.csv
[Sat Feb 25 19:05:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 19:05:28 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sat Feb 25 19:05:28 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sat Feb 25 19:05:28 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Sun Feb 26 05:58:03 2012] Warning, spatial fit 39 centroid is now closest to src. 95
[Sun Feb 26 05:58:03 2012] Source 40 is offset by 1.776073 and -0.209174 pixels which is larger than
2 X fitted extent = 1.682299 x 1.682299, not incorporating fit results
[Sun Feb 26 05:58:03 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:03 2012] Assessing source extent using major
[Sun Feb 26 05:58:03 2012] Source does appear to be extended
[Sun Feb 26 05:58:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 05:59:38 2012] Using EEF radius (= 7.06 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 05:59:38 2012] Initial guess for spatial extent in simple fitting = 7.06"
[Sun Feb 26 05:59:38 2012] source mask rpix=1.6, npix_max = 18, mask sum = 14, frac = 0.777
[Sun Feb 26 05:59:38 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 7.06"
[Sun Feb 26 13:33:45 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src35.ximg exists
[Sun Feb 26 13:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src35.csv
[Sun Feb 26 13:33:45 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src35_1.ximg exists
[Sun Feb 26 13:33:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src35.csv
[Sun Feb 26 13:33:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 13:33:47 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sun Feb 26 13:33:47 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sun Feb 26 13:33:47 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Mon Feb 27 00:35:59 2012] Spatial fit model total counts = 2654.680000, observed total counts = 2656.000000
[Mon Feb 27 00:35:59 2012] Offset between fit and detection position for source 40 = 0.534021 pixels
[Mon Feb 27 00:35:59 2012] 2512.241000 total counts/ 2280.660000 bgd. counts: snr = 4.849229
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.534021 pixels
  Position = (299.2, 316.3) = 0 42 52.34 41 16 48.0
  Extent = 4.5 (3.9-5.1)", rotation angle = 0
  Source counts = 231.6 +/- 50.1
  Background counts = 2280.7
  Rate = 0.02 +/- 0.004
[Mon Feb 27 00:35:59 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:35:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:35:59 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 00:35:59 2012] Source does appear to be extended
[Mon Feb 27 00:35:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 00:37:25 2012] XMMSAS src. selection expression = ellipse(25981.220560, 27468.496000, 268.180208, 268.180208, 0.000000, X, Y)
[Mon Feb 27 00:37:25 2012] Writing source region out to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src40_src.reg
[Mon Feb 27 00:37:25 2012] Extracting stamp from image fullrun_pn_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (284, 301) - (315, 332)
[Mon Feb 27 00:37:25 2012] XMMSAS bgd. selection expression = annulus(25981.220560, 27468.496000, 446.967013, 893.934026, X, Y) && !ellipse(26960.392000, 28990.722000, 710.403220, 710.403220, 0.000000, X, Y) && !ellipse(25475.143585, 29014.180817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27535.067119, 28494.098000, 762.839230, 481.380347, 177.469197, X, Y) && !ellipse(27433.742000, 26933.814000, 1140.176033, 720.917621, 0.000000, X, Y) && !ellipse(25405.856000, 26563.304800, 377.548011, 377.548011, 0.000000, X, Y) && !ellipse(25958.279266, 26076.977661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24796.701294, 28310.576813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25766.416000, 28554.189800, 684.220820, 684.220820, 0.000000, X, Y) && !ellipse(25282.794678, 27541.183838, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 00:37:25 2012] Writing fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src40.gif
[Mon Feb 27 01:15:59 2012] Mean detx,y = (-1838.48, 142.80) 
[Mon Feb 27 01:16:04 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 01:16:19 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 01:16:19 2012] Setting source spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Mon Feb 27 01:16:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Mon Feb 27 22:00:28 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:28 2012] Error reading totcts from fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Mon Feb 27 22:00:34 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:34 2012] Using photon index=1.80, rate=0.0178, arf fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src40.arf
[Mon Feb 27 22:00:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:34 2012] Updating source flux to 7.2e-14
[Mon Feb 27 22:20:42 2012] Flag b found in src. 40 procflags, skipping spectral fitting