[Sat Feb 25 10:16:57 2012] Detection parameters:
  Position = (269.6, 333.8) = 0 43 3.78 41 18 4.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2111.3 +/- 58.4
  Background counts = 134.8
  Rate = 0.2 +/- 0.004

[Sat Feb 25 10:17:05 2012] Off-axis axis estimate = 3.31'
[Sat Feb 25 10:22:34 2012] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 10:22:34 2012] Initial guess for spatial extent in simple fitting = 8.08"
[Sat Feb 25 10:22:34 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.124
[Sat Feb 25 10:22:34 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 8.08"
[Sat Feb 25 19:05:25 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src31.ximg exists
[Sat Feb 25 19:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src31.csv
[Sat Feb 25 19:05:25 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src31_1.ximg exists
[Sat Feb 25 19:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src31.csv
[Sat Feb 25 19:05:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 19:05:28 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sat Feb 25 19:05:28 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sat Feb 25 19:05:28 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Sun Feb 26 05:58:03 2012] Spatial fit model total counts = 2021.000000, observed total counts = 2021.000000
[Sun Feb 26 05:58:03 2012] Offset between fit and detection position for source 31 = 0.104710 pixels
[Sun Feb 26 05:58:03 2012] 2032.222000 total counts/ 977.652000 bgd. counts: snr = 33.727431
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.104710 pixels
  Position = (269.5, 333.7) = 0 43 3.80 41 18 3.9
  Extent = 5.3 (5.1-5.7)", rotation angle = 0
  Source counts = 1054.6 +/- 45.1
  Background counts = 977.7
  Rate = 0.08 +/- 0.003
[Sun Feb 26 05:58:03 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:03 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 05:58:03 2012] Source does appear to be extended
[Sun Feb 26 05:58:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 05:59:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 05:59:38 2012] Initial guess for spatial extent in simple fitting = 5.34"
[Sun Feb 26 05:59:38 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.753
[Sun Feb 26 05:59:38 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 5.34"
[Sun Feb 26 13:33:45 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src29.ximg exists
[Sun Feb 26 13:33:45 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src29_1.ximg exists
[Sun Feb 26 13:33:45 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src29 appears to have run properly
[Sun Feb 26 13:33:47 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sun Feb 26 13:33:47 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sun Feb 26 13:33:47 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Mon Feb 27 00:35:59 2012] Spatial fit model total counts = 2020.220000, observed total counts = 2021.000000
[Mon Feb 27 00:35:59 2012] Offset between fit and detection position for source 31 = 0.000817 pixels
[Mon Feb 27 00:35:59 2012] 2031.388000 total counts/ 977.968000 bgd. counts: snr = 33.685208
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.000817 pixels
  Position = (269.5, 333.7) = 0 43 3.80 41 18 4.0
  Extent = 5.3 (5.1-5.7)", rotation angle = 0
  Source counts = 1053.4 +/- 45.1
  Background counts = 978.0
  Rate = 0.08 +/- 0.003
[Mon Feb 27 00:35:59 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:35:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:35:59 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 00:35:59 2012] Source does appear to be extended
[Mon Feb 27 00:35:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 00:37:25 2012] Counts = 1053.420000, rescaling region sizes by 2.000000
[Mon Feb 27 00:37:25 2012] XMMSAS src. selection expression = ellipse(23397.020400, 28987.222600, 640.459218, 640.459218, 0.000000, X, Y)
[Mon Feb 27 00:37:25 2012] Writing source region out to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src31_src.reg
[Mon Feb 27 00:37:25 2012] Extracting stamp from image fullrun_pn_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (233, 297) - (306, 371)
[Mon Feb 27 00:37:25 2012] XMMSAS bgd. selection expression = annulus(23397.020400, 28987.222600, 2134.864061, 4269.728123, X, Y) && !ellipse(23528.169250, 32935.066400, 406.562982, 406.562982, 0.000000, X, Y) && !ellipse(22625.870400, 31760.183000, 680.484820, 680.484820, 0.000000, X, Y) && !ellipse(24344.703600, 30482.888800, 440.804813, 440.804813, 0.000000, X, Y) && !ellipse(25939.263400, 29976.672600, 445.185613, 360.616810, 308.860800, X, Y) && !ellipse(25307.836914, 29738.324127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26960.392000, 28990.722000, 710.403220, 710.403220, 0.000000, X, Y) && !ellipse(25475.143585, 29014.180817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19519.042023, 28733.143311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27535.067119, 28494.098000, 762.839230, 481.380347, 177.469197, X, Y) && !ellipse(25981.220560, 27468.496000, 357.573610, 357.573610, 0.000000, X, Y) && !ellipse(27433.742000, 26933.814000, 1140.176033, 720.917621, 0.000000, X, Y) && !ellipse(27711.734000, 26802.884000, 787.297623, 787.297623, 0.000000, X, Y) && !ellipse(23276.434174, 26450.165924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25405.856000, 26563.304800, 377.548011, 377.548011, 0.000000, X, Y) && !ellipse(24298.727320, 26611.082400, 410.530412, 410.530412, 0.000000, X, Y) && !ellipse(25958.279266, 26076.977661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24872.972000, 25182.290000, 1111.224032, 1111.224032, 0.000000, X, Y) && !ellipse(28217.876465, 26315.794891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23573.358600, 25796.651200, 523.335215, 437.024013, 69.035000, X, Y) && !ellipse(27264.399689, 24851.384277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21846.752200, 25138.257600, 380.626411, 380.626411, 0.000000, X, Y) && !ellipse(26876.899800, 25757.349000, 513.374415, 513.374415, 0.000000, X, Y) && !ellipse(28015.958000, 24904.842000, 1138.360033, 1138.360033, 0.000000, X, Y) && !ellipse(27595.553528, 24241.468292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22758.989220, 30430.120400, 474.214414, 474.214414, 0.000000, X, Y) && !ellipse(27261.160553, 29422.059692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27927.756104, 29002.785431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24796.701294, 28310.576813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25766.416000, 28554.189800, 684.220820, 684.220820, 0.000000, X, Y) && !ellipse(25282.794678, 27541.183838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25515.959351, 25022.923065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26989.118286, 24315.055084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25540.308624, 24587.678802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26030.323486, 24406.935028, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 00:37:25 2012] Writing fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src31.gif
[Mon Feb 27 01:07:00 2012] Mean detx,y = (-4855.31, 275.60) 
[Mon Feb 27 01:07:06 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 01:08:33 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 01:08:34 2012] Setting source spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Mon Feb 27 01:08:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Mon Feb 27 22:00:28 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:28 2012] Error reading totcts from fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Mon Feb 27 22:00:34 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:34 2012] Using photon index=1.80, rate=0.0812, arf fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src31.arf
[Mon Feb 27 22:00:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:34 2012] Updating source flux to 2.7e-13