[Sat Feb 25 10:16:56 2012] Detection parameters:
  Position = (291.5, 342.4) = 0 42 55.32 41 18 35.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 451.4 +/- 30.7
  Background counts = 133.2
  Rate = 0.05 +/- 0.003

[Sat Feb 25 10:17:05 2012] Off-axis axis estimate = 3.23'
[Sat Feb 25 10:22:34 2012] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 10:22:34 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Sat Feb 25 10:22:34 2012] source mask rpix=1.8, npix_max = 22, mask sum = 17, frac = 0.770
[Sat Feb 25 10:22:34 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.04"
[Sat Feb 25 19:05:24 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src23.ximg exists
[Sat Feb 25 19:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src23.csv
[Sat Feb 25 19:05:25 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src23_1.ximg exists
[Sat Feb 25 19:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src23.csv
[Sat Feb 25 19:05:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 19:05:27 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sat Feb 25 19:05:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sat Feb 25 19:05:27 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sat Feb 25 19:05:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sat Feb 25 19:05:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 05:58:03 2012] Warning, spatial fit 23 centroid is now closest to src. 22
[Sun Feb 26 05:58:03 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:03 2012] Assessing source extent using major
[Sun Feb 26 05:58:03 2012] Source does appear to be extended
[Sun Feb 26 05:58:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 05:59:38 2012] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 05:59:38 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Sun Feb 26 05:59:38 2012] source mask rpix=1.8, npix_max = 22, mask sum = 17, frac = 0.770
[Sun Feb 26 05:59:38 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 8.04"
[Sun Feb 26 13:33:44 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src21.ximg exists
[Sun Feb 26 13:33:44 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun Feb 26 13:33:44 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src21 appears to have run properly
[Sun Feb 26 13:33:46 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun Feb 26 13:33:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sun Feb 26 13:33:46 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Feb 26 13:33:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sun Feb 26 13:33:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 00:35:58 2012] Warning, spatial fit 21 centroid is now closest to src. 30
[Mon Feb 27 00:35:59 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 11.221957 pixels away
[Mon Feb 27 00:35:59 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:35:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:35:59 2012] Assessing source extent using major
[Mon Feb 27 00:35:59 2012] Source does appear to be extended
[Mon Feb 27 00:35:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 00:37:24 2012] XMMSAS src. selection expression = ellipse(25307.836914, 29738.324127, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 00:37:24 2012] Writing source region out to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src23_src.reg
[Mon Feb 27 00:37:24 2012] Extracting stamp from image fullrun_pn_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (254, 305) - (329, 380)
[Mon Feb 27 00:37:24 2012] XMMSAS bgd. selection expression = annulus(25307.836914, 29738.324127, 1087.500000, 2175.000000, X, Y) && !ellipse(22625.870400, 31760.183000, 680.484820, 680.484820, 0.000000, X, Y) && !ellipse(24344.703600, 30482.888800, 440.804813, 440.804813, 0.000000, X, Y) && !ellipse(25939.263400, 29976.672600, 445.185613, 360.616810, 308.860800, X, Y) && !ellipse(26960.392000, 28990.722000, 710.403220, 710.403220, 0.000000, X, Y) && !ellipse(25475.143585, 29014.180817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23397.020400, 28987.222600, 426.972812, 426.972812, 0.000000, X, Y) && !ellipse(27535.067119, 28494.098000, 762.839230, 481.380347, 177.469197, X, Y) && !ellipse(25981.220560, 27468.496000, 357.573610, 357.573610, 0.000000, X, Y) && !ellipse(27433.742000, 26933.814000, 1140.176033, 720.917621, 0.000000, X, Y) && !ellipse(27711.734000, 26802.884000, 787.297623, 787.297623, 0.000000, X, Y) && !ellipse(22758.989220, 30430.120400, 474.214414, 474.214414, 0.000000, X, Y) && !ellipse(27261.160553, 29422.059692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27927.756104, 29002.785431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24796.701294, 28310.576813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25766.416000, 28554.189800, 684.220820, 684.220820, 0.000000, X, Y) && !ellipse(25282.794678, 27541.183838, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 00:37:24 2012] Writing fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src23.gif
[Mon Feb 27 00:59:10 2012] Mean detx,y = (-3470.03, -1632.25) 
[Mon Feb 27 00:59:15 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 00:59:58 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 00:59:59 2012] Setting source spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon Feb 27 00:59:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Mon Feb 27 03:56:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 27 03:56:59 2012] rmf not generated due to insufficient counts
[Mon Feb 27 22:00:28 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:28 2012] Error reading totcts from fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon Feb 27 22:00:33 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:33 2012] Using photon index=1.80, rate=0.0452, arf fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src23.arf
[Mon Feb 27 22:00:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:33 2012] Updating source flux to 2e-13
[Mon Feb 27 22:20:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting