[Sat Feb 25 10:17:04 2012] Detection parameters:
  Position = (355.1, 275.8) = 0 42 30.78 41 13 59.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.8 +/- 22.1
  Background counts = 154.7
  Rate = 0.006 +/- 0.001

[Sat Feb 25 10:17:05 2012] Off-axis axis estimate = 4.42'
[Sat Feb 25 10:22:34 2012] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 10:22:34 2012] Initial guess for spatial extent in simple fitting = 8.64"
[Sat Feb 25 10:22:34 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.011
[Sat Feb 25 10:22:34 2012] Giving source the simple spatial ID 97 for pass 0, mean size = 8.64"
[Sat Feb 25 19:05:27 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src97.ximg exists
[Sat Feb 25 19:05:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src97.csv
[Sat Feb 25 19:05:27 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src97_1.ximg exists
[Sat Feb 25 19:05:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src97.csv
[Sat Feb 25 19:05:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src97_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 19:05:29 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src97.ximg exists
[Sat Feb 25 19:05:29 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src97_1.ximg exists
[Sat Feb 25 19:05:29 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src97 appears to have run properly
[Sun Feb 26 05:58:03 2012] Spatial fit model total counts = 1580.770000, observed total counts = 1562.000000
[Sun Feb 26 05:58:03 2012] Offset between fit and detection position for source 100 = 7.369019 pixels
[Sun Feb 26 05:58:03 2012] 1296.982000 total counts/ 675.952000 bgd. counts: snr = 23.886617
Spatial fit parameters:
  Offset between fit and detection position for source 100 = 7.369019 pixels
  Position = (359.3, 281.9) = 0 42 29.17 41 14 18.1
  Extent = 17.3 (17.2-34.6)", rotation angle = 0
  Source counts = 621.0 +/- 36.0
  Background counts = 676.0
  Rate = 0.05 +/- 0.003
[Sun Feb 26 05:58:03 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:03 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 05:58:03 2012] Source does appear to be extended
[Sun Feb 26 05:58:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 05:58:03 2012] Source is confused with source 97
[Sun Feb 26 05:59:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 05:59:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 26 05:59:38 2012] Initial guess for spatial extent in simple fitting = 17.28"
[Sun Feb 26 05:59:38 2012] source mask rpix=4.0, npix_max = 80, mask sum = 80, frac = 1.000
[Sun Feb 26 05:59:38 2012] Giving source the simple spatial ID 91 for pass 1, mean size = 17.28"
[Sun Feb 26 13:33:46 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src91.ximg exists
[Sun Feb 26 13:33:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src91.csv
[Sun Feb 26 13:33:46 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src91_1.ximg exists
[Sun Feb 26 13:33:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src91.csv
[Sun Feb 26 13:33:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src91_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 13:33:49 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src91.ximg exists
[Sun Feb 26 13:33:49 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src91_1.ximg exists
[Sun Feb 26 13:33:49 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src91 appears to have run properly
[Mon Feb 27 00:35:59 2012] Spatial fit model total counts = 4434.470000, observed total counts = 4430.000000
[Mon Feb 27 00:35:59 2012] Offset between fit and detection position for source 100 = 2.926879 pixels
[Mon Feb 27 00:35:59 2012] Warning, changing simple spatial fit ID from 91 to 51
[Mon Feb 27 00:35:59 2012] 4191.373000 total counts/ 4033.320000 bgd. counts: snr = 2.488693
Spatial fit parameters:
  Offset between fit and detection position for source 100 = 2.926879 pixels
  Position = (358.7, 284.7) = 0 42 29.39 41 14 30.6
  Extent = 17.5 (14.8-21.9)", rotation angle = 0
  Source counts = 158.1 +/- 64.7
  Background counts = 4033.3
  Rate = 0.01 +/- 0.005
[Mon Feb 27 00:35:59 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:35:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:35:59 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 00:35:59 2012] Source does appear to be extended
[Mon Feb 27 00:35:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 00:37:32 2012] XMMSAS src. selection expression = ellipse(31158.300000, 24722.660000, 1051.452030, 1051.452030, 0.000000, X, Y)
[Mon Feb 27 00:37:32 2012] Writing source region out to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src100_src.reg
[Mon Feb 27 00:37:32 2012] Extracting stamp from image fullrun_pn_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (298, 224) - (419, 345)
[Mon Feb 27 00:37:32 2012] XMMSAS bgd. selection expression = annulus(31158.300000, 24722.660000, 1752.420050, 3504.840101, X, Y) && !ellipse(29085.045660, 26554.041400, 409.526412, 409.526412, 0.000000, X, Y) && !ellipse(35057.022186, 28860.027161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29662.002655, 28372.362000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29095.124695, 28326.700806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27535.067119, 28494.098000, 762.839230, 481.380347, 177.469197, X, Y) && !ellipse(35352.206000, 27896.862000, 1698.640049, 1698.640049, 0.000000, X, Y) && !ellipse(29590.101807, 27045.003998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27433.742000, 26933.814000, 1140.176033, 720.917621, 0.000000, X, Y) && !ellipse(30145.345428, 26842.852722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27711.734000, 26802.884000, 787.297623, 787.297623, 0.000000, X, Y) && !ellipse(32947.729800, 26533.330800, 330.277610, 330.277610, 0.000000, X, Y) && !ellipse(30776.350311, 26920.730042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28217.876465, 26315.794891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32619.829000, 25998.178000, 382.640811, 382.640811, 0.000000, X, Y) && !ellipse(30011.172000, 25260.046000, 1209.288035, 1209.288035, 0.000000, X, Y) && !ellipse(27264.399689, 24851.384277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28259.662600, 24967.852400, 392.293611, 392.293611, 0.000000, X, Y) && !ellipse(29447.508148, 24645.226562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33626.483760, 24199.467200, 331.384810, 331.384810, 0.000000, X, Y) && !ellipse(32605.267242, 24189.822662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28015.958000, 24904.842000, 1138.360033, 1138.360033, 0.000000, X, Y) && !ellipse(32141.869049, 23678.655182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27595.553528, 24241.468292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29511.794373, 23990.252075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28632.736000, 23416.571200, 444.216013, 444.216013, 0.000000, X, Y) && !ellipse(30547.441600, 23168.933440, 522.689615, 422.802412, 339.470400, X, Y) && !ellipse(34392.832092, 22363.465179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31416.054000, 22160.646400, 435.104813, 435.104813, 0.000000, X, Y) && !ellipse(27657.341600, 21268.146600, 332.699210, 332.699210, 0.000000, X, Y) && !ellipse(27927.756104, 29002.785431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34368.814697, 28913.770264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30286.388550, 27700.193542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31296.646200, 24876.827600, 750.639222, 750.639222, 0.000000, X, Y) && !ellipse(26989.118286, 24315.055084, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 00:37:32 2012] Writing fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src100.gif
[Mon Feb 27 02:52:55 2012] Mean detx,y = (4037.95, -279.87) 
[Mon Feb 27 02:53:01 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 02:54:12 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 02:54:12 2012] Setting source spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src100_src_b10.pi.gz
[Mon Feb 27 02:54:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src100_bgd.pi.gz
[Mon Feb 27 22:00:32 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:32 2012] Error reading totcts from fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src100_src_b10.pi.gz
[Mon Feb 27 22:00:38 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:38 2012] Using photon index=1.80, rate=0.0122, arf fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src100.arf
[Mon Feb 27 22:00:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:38 2012] Updating source flux to 3.5e-14
[Mon Feb 27 22:20:42 2012] Flag c found in src. 100 procflags, skipping spectral fitting