[Sat Feb 25 10:16:54 2012] Detection parameters:
  Position = (335.1, 305.3) = 0 42 38.47 41 16 3.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 19203.8 +/- 161.3
  Background counts = 170.9
  Rate = 1 +/- 0.01

[Sat Feb 25 10:17:05 2012] Off-axis axis estimate = 2.71'
[Sat Feb 25 10:22:34 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 10:22:34 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Sat Feb 25 10:22:34 2012] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.907
[Sat Feb 25 10:22:34 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.78"
[Sat Feb 25 19:05:24 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src1.ximg exists
[Sat Feb 25 19:05:24 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src1.csv
[Sat Feb 25 19:05:24 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Feb 25 19:05:24 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src1.csv
[Sat Feb 25 19:05:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 19:05:27 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Feb 25 19:05:27 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Feb 25 19:05:27 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 26 05:58:03 2012] Spatial fit model total counts = 15684.500000, observed total counts = 15724.000000
[Sun Feb 26 05:58:03 2012] Offset between fit and detection position for source 1 = 0.550597 pixels
[Sun Feb 26 05:58:03 2012] 15337.600000 total counts/ 6008.160000 bgd. counts: snr = 120.360735
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.550597 pixels
  Position = (334.9, 305.8) = 0 42 38.57 41 16 2.2
  Extent = 5.2 (5.1-5.2)", rotation angle = 0
  Source counts = 9329.4 +/- 123.8
  Background counts = 6008.2
  Rate = 0.7 +/- 0.01
[Sun Feb 26 05:58:03 2012] Spatial fit model total counts = 10939.600000, observed total counts = 11867.000000
[Sun Feb 26 05:58:03 2012] Offset between fit and detection position for source 1 = 0.099086 pixels
[Sun Feb 26 05:58:03 2012] Warning, changing simple spatial fit ID from 1 to 41
[Sun Feb 26 05:58:03 2012] 9540.700000 total counts/ 1440.690000 bgd. counts: snr = 213.402884
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.099086 pixels
  Position = (334.9, 305.8) = 0 42 38.55 41 16 2.6
  Extent = 4.6 (4.5-4.6)", rotation angle = 0
  Source counts = 8100.0 +/- 97.7
  Background counts = 1440.7
  Rate = 0.6 +/- 0.008
[Sun Feb 26 05:58:03 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:03 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 05:58:03 2012] Source does appear to be extended
[Sun Feb 26 05:58:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 05:59:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 05:59:37 2012] Initial guess for spatial extent in simple fitting = 4.56"
[Sun Feb 26 05:59:37 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.940
[Sun Feb 26 05:59:37 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.56"
[Sun Feb 26 13:33:43 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src1.ximg exists
[Sun Feb 26 13:33:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src1.csv
[Sun Feb 26 13:33:43 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Feb 26 13:33:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src1.csv
[Sun Feb 26 13:33:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 13:33:46 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 26 13:33:46 2012] fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 26 13:33:46 2012] Fit fullrun_pn_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Feb 27 00:35:58 2012] Spatial fit model total counts = 15444.400000, observed total counts = 15472.000000
[Mon Feb 27 00:35:58 2012] Offset between fit and detection position for source 1 = 0.090680 pixels
[Mon Feb 27 00:35:58 2012] 14816.960000 total counts/ 5524.910000 bgd. counts: snr = 125.011203
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.090680 pixels
  Position = (334.9, 305.8) = 0 42 38.57 41 16 2.3
  Extent = 5.1 (5.0-5.2)", rotation angle = 0
  Source counts = 9292.0 +/- 121.7
  Background counts = 5524.9
  Rate = 0.7 +/- 0.009
[Mon Feb 27 00:35:59 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:35:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:35:59 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 00:35:59 2012] Source does appear to be extended
[Mon Feb 27 00:35:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 00:37:23 2012] Counts = 9292.050000, rescaling region sizes by 2.000000
[Mon Feb 27 00:37:23 2012] XMMSAS src. selection expression = ellipse(29085.045660, 26554.041400, 614.289618, 614.289618, 0.000000, X, Y)
[Mon Feb 27 00:37:23 2012] Writing source region out to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src1_src.reg
[Mon Feb 27 00:37:23 2012] Extracting stamp from image fullrun_pn_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (300, 270) - (370, 341)
[Mon Feb 27 00:37:23 2012] XMMSAS bgd. selection expression = annulus(29085.045660, 26554.041400, 2047.632059, 4095.264118, X, Y) && !ellipse(30733.403920, 30860.307600, 418.920012, 418.920012, 0.000000, X, Y) && !ellipse(31892.239022, 30379.188139, 446.204813, 444.235322, 42.660033, X, Y) && !ellipse(25939.263400, 29976.672600, 445.185613, 360.616810, 308.860800, X, Y) && !ellipse(25307.836914, 29738.324127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28716.205200, 29787.028600, 410.914412, 350.224810, 25.425500, X, Y) && !ellipse(26960.392000, 28990.722000, 710.403220, 710.403220, 0.000000, X, Y) && !ellipse(25475.143585, 29014.180817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29662.002655, 28372.362000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29095.124695, 28326.700806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27535.067119, 28494.098000, 762.839230, 481.380347, 177.469197, X, Y) && !ellipse(25981.220560, 27468.496000, 357.573610, 357.573610, 0.000000, X, Y) && !ellipse(29590.101807, 27045.003998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27433.742000, 26933.814000, 1140.176033, 720.917621, 0.000000, X, Y) && !ellipse(30145.345428, 26842.852722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27711.734000, 26802.884000, 787.297623, 787.297623, 0.000000, X, Y) && !ellipse(32947.729800, 26533.330800, 330.277610, 330.277610, 0.000000, X, Y) && !ellipse(25405.856000, 26563.304800, 377.548011, 377.548011, 0.000000, X, Y) && !ellipse(30776.350311, 26920.730042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25958.279266, 26076.977661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24872.972000, 25182.290000, 1111.224032, 1111.224032, 0.000000, X, Y) && !ellipse(28217.876465, 26315.794891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32619.829000, 25998.178000, 382.640811, 382.640811, 0.000000, X, Y) && !ellipse(30011.172000, 25260.046000, 1209.288035, 1209.288035, 0.000000, X, Y) && !ellipse(27264.399689, 24851.384277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28259.662600, 24967.852400, 392.293611, 392.293611, 0.000000, X, Y) && !ellipse(26876.899800, 25757.349000, 513.374415, 513.374415, 0.000000, X, Y) && !ellipse(29447.508148, 24645.226562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32605.267242, 24189.822662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28015.958000, 24904.842000, 1138.360033, 1138.360033, 0.000000, X, Y) && !ellipse(32141.869049, 23678.655182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27595.553528, 24241.468292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29511.794373, 23990.252075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28632.736000, 23416.571200, 444.216013, 444.216013, 0.000000, X, Y) && !ellipse(30547.441600, 23168.933440, 522.689615, 422.802412, 339.470400, X, Y) && !ellipse(31416.054000, 22160.646400, 435.104813, 435.104813, 0.000000, X, Y) && !ellipse(27261.160553, 29422.059692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27927.756104, 29002.785431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24796.701294, 28310.576813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25766.416000, 28554.189800, 684.220820, 684.220820, 0.000000, X, Y) && !ellipse(30286.388550, 27700.193542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25282.794678, 27541.183838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25515.959351, 25022.923065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31296.646200, 24876.827600, 750.639222, 750.639222, 0.000000, X, Y) && !ellipse(26989.118286, 24315.055084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25540.308624, 24587.678802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31158.300000, 24722.660000, 1401.936040, 1401.936040, 0.000000, X, Y) && !ellipse(26030.323486, 24406.935028, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 00:37:23 2012] Writing fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src1.gif
[Mon Feb 27 00:38:03 2012] Mean detx,y = (1232.14, -742.50) 
[Mon Feb 27 00:38:10 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 00:39:11 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 00:39:11 2012] Setting source spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 27 00:39:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Feb 27 22:00:26 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:26 2012] Error reading totcts from fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 27 22:00:32 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:32 2012] Using photon index=1.80, rate=0.716, arf fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src1.arf
[Mon Feb 27 22:00:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:32 2012] Updating source flux to 1.9e-12
[Mon Feb 27 22:31:03 2012] Reading fit data from xmm0505720501/analysis//spectral/fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src1_pl.csv
[Mon Feb 27 22:31:03 2012] Spectral fit parameter nH value = 1.2259e+21
[Mon Feb 27 22:31:03 2012] Spectral fit parameter PhoIndex value = 1.84688
[Mon Feb 27 22:31:03 2012] Failed to get F(0.3-8.0) from xmm0505720501/analysis//spectral/fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Feb 27 22:31:03 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:31:03 2012] Using Nh = 1.2e+21, photon index=1.85, rate=0.716, arf fullrun_pn_xmm0505720501_pi300-10000_pass1_cl_src1.arf
[Mon Feb 27 22:31:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:31:03 2012] Updating source flux to 2.4e-12