[Sat Feb 25 10:17:27 2012] Detection parameters:
  Position = (358.5, 485.7) = 0 42 29.36 41 29 5.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.5 +/- 11.0
  Background counts = 11.3
  Rate = 0.003 +/- 0.0005

[Sat Feb 25 10:17:27 2012] Off-axis axis estimate = 14.26'
[Sun Feb 26 00:05:36 2012] Using EEF radius (= 13.56 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 00:05:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 26 00:05:36 2012] Initial guess for spatial extent in simple fitting = 13.56"
[Sun Feb 26 00:05:36 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.937
[Sun Feb 26 00:05:36 2012] Giving source the simple spatial ID 86 for pass 0, mean size = 13.56"
[Sun Feb 26 05:57:25 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src86.ximg exists
[Sun Feb 26 05:57:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src86.csv
[Sun Feb 26 05:57:25 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src86_1.ximg exists
[Sun Feb 26 05:57:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src86.csv
[Sun Feb 26 05:57:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 05:57:29 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src86.ximg exists
[Sun Feb 26 05:57:29 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src86_1.ximg exists
[Sun Feb 26 05:57:29 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src86 appears to have run properly
[Sun Feb 26 05:58:56 2012] Warning: source 86 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 93 at 17.968885 pixels away
[Sun Feb 26 05:58:56 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:56 2012] Assessing source extent using major
[Sun Feb 26 05:58:56 2012] Source does appear to be extended
[Sun Feb 26 05:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 19:06:09 2012] Using EEF radius (= 13.56 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 19:06:09 2012] Initial guess for spatial extent in simple fitting = 13.56"
[Sun Feb 26 19:06:09 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.937
[Sun Feb 26 19:06:09 2012] Giving source the simple spatial ID 78 for pass 1, mean size = 13.56"
[Mon Feb 27 00:35:21 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src78.ximg exists
[Mon Feb 27 00:35:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src78.csv
[Mon Feb 27 00:35:21 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src78_1.ximg exists
[Mon Feb 27 00:35:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src78.csv
[Mon Feb 27 00:35:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 00:35:24 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src78.ximg exists
[Mon Feb 27 00:35:24 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src78_1.ximg exists
[Mon Feb 27 00:35:24 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src78 appears to have run properly
[Mon Feb 27 00:36:41 2012] Warning: source 78 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 93 at 17.972129 pixels away
[Mon Feb 27 00:36:41 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:36:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:36:41 2012] Assessing source extent using major
[Mon Feb 27 00:36:41 2012] Source does appear to be extended
[Mon Feb 27 00:36:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 14:51:07 2012] XMMSAS src. selection expression = ellipse(31143.856812, 42203.928284, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 14:51:07 2012] Writing source region out to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src93_src.reg
[Mon Feb 27 14:51:07 2012] Extracting stamp from image fullrun_mos2_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (321, 448) - (396, 523)
[Mon Feb 27 14:51:07 2012] XMMSAS bgd. selection expression = annulus(31143.856812, 42203.928284, 1087.500000, 2175.000000, X, Y)
[Mon Feb 27 14:51:07 2012] Writing fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src93.gif
[Mon Feb 27 15:44:45 2012] Mean detx,y = (5851.24, 14807.43) 
[Mon Feb 27 15:44:47 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 15:45:15 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 15:45:15 2012] Setting source spectrum file to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src93_src_b10.pi.gz
[Mon Feb 27 15:45:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src93_bgd.pi.gz
[Mon Feb 27 21:46:56 2012] Not generating rmf since there are only 60 counts
[Mon Feb 27 21:46:56 2012] rmf not generated due to insufficient counts
[Mon Feb 27 22:00:55 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:55 2012] Error reading totcts from fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src93_src_b10.pi.gz
[Mon Feb 27 22:00:59 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:59 2012] Using photon index=1.80, rate=0.00281, arf fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src93.arf
[Mon Feb 27 22:00:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:59 2012] Updating source flux to 9.7e-14
[Mon Feb 27 22:10:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting