[Sat Feb 25 10:17:26 2012] Detection parameters:
  Position = (369.7, 273.2) = 0 42 25.14 41 13 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.9 +/- 14.9
  Background counts = 30.1
  Rate = 0.005 +/- 0.0008

[Sat Feb 25 10:17:27 2012] Off-axis axis estimate = 5.48'
[Sun Feb 26 00:05:36 2012] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 00:05:36 2012] Initial guess for spatial extent in simple fitting = 9.17"
[Sun Feb 26 00:05:36 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.919
[Sun Feb 26 00:05:36 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 9.17"
[Sun Feb 26 05:57:25 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src67.ximg exists
[Sun Feb 26 05:57:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src67.csv
[Sun Feb 26 05:57:25 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src67_1.ximg exists
[Sun Feb 26 05:57:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src67.csv
[Sun Feb 26 05:57:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 05:57:28 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Sun Feb 26 05:57:28 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Sun Feb 26 05:57:28 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Sun Feb 26 05:58:56 2012] Source 85 is offset by 0.268131 and 8.702976 pixels which is larger than
2 X fitted extent = 1.057807 x 1.057807, not incorporating fit results
[Sun Feb 26 05:58:56 2012] Spatial fit model total counts = 905.594000, observed total counts = 903.000000
[Sun Feb 26 05:58:56 2012] Offset between fit and detection position for source 85 = 8.675463 pixels
[Sun Feb 26 05:58:56 2012] 843.086000 total counts/ 630.916000 bgd. counts: snr = 8.446917
Spatial fit parameters:
  Offset between fit and detection position for source 85 = 8.675463 pixels
  Position = (362.1, 269.0) = 0 42 28.07 41 13 22.0
  Extent = 18.3 (18.3-36.7)", rotation angle = 0
  Source counts = 212.2 +/- 29.0
  Background counts = 630.9
  Rate = 0.01 +/- 0.001
[Sun Feb 26 05:58:56 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:56 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 05:58:56 2012] Source does appear to be extended
[Sun Feb 26 05:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 05:58:56 2012] Source is confused with source 13
[Sun Feb 26 19:06:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 19:06:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 26 19:06:09 2012] Initial guess for spatial extent in simple fitting = 18.34"
[Sun Feb 26 19:06:09 2012] source mask rpix=4.2, npix_max = 88, mask sum = 100, frac = 1.124
[Sun Feb 26 19:06:09 2012] Giving source the simple spatial ID 66 for pass 1, mean size = 18.34"
[Mon Feb 27 00:35:21 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src66.ximg exists
[Mon Feb 27 00:35:21 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src66_1.ximg exists
[Mon Feb 27 00:35:21 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src66 appears to have run properly
[Mon Feb 27 00:35:24 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src66.ximg exists
[Mon Feb 27 00:35:24 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src66_1.ximg exists
[Mon Feb 27 00:35:24 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src66 appears to have run properly
[Mon Feb 27 00:36:41 2012] Warning, spatial fit 66 centroid is now closest to src. 13
[Mon Feb 27 00:36:41 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:36:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:36:41 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 00:36:41 2012] Source does appear to be extended
[Mon Feb 27 00:36:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 14:51:07 2012] XMMSAS src. selection expression = ellipse(31457.614000, 23351.544000, 1100.466032, 1100.466032, 0.000000, X, Y)
[Mon Feb 27 14:51:07 2012] Writing source region out to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src85_src.reg
[Mon Feb 27 14:51:07 2012] Extracting stamp from image fullrun_mos2_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (299, 206) - (425, 332)
[Mon Feb 27 14:51:07 2012] XMMSAS bgd. selection expression = annulus(31457.614000, 23351.544000, 1834.110053, 3668.220106, X, Y) && !ellipse(29076.488400, 26575.173000, 417.119212, 417.119212, 0.000000, X, Y) && !ellipse(27157.878000, 27038.004000, 680.987220, 390.078411, 90.000000, X, Y) && !ellipse(28637.404000, 26328.090000, 1774.320051, 1774.320051, 0.000000, X, Y) && !ellipse(29529.497620, 23907.568200, 396.819211, 396.819211, 0.000000, X, Y) && !ellipse(30766.484500, 26929.558400, 392.164811, 392.164811, 0.000000, X, Y) && !ellipse(31404.807000, 22158.465000, 402.497612, 371.717611, 258.532000, X, Y) && !ellipse(32604.648000, 26002.229600, 330.037609, 330.037609, 0.000000, X, Y) && !ellipse(30537.698000, 23179.782000, 419.964012, 419.964012, 0.000000, X, Y) && !ellipse(33574.732800, 24140.561200, 337.152810, 337.152810, 0.000000, X, Y) && !ellipse(32937.769860, 26527.922400, 300.194409, 300.194409, 0.000000, X, Y) && !ellipse(31434.003723, 19333.719650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33648.874000, 22179.690000, 395.823211, 395.823211, 0.000000, X, Y) && !ellipse(27662.747009, 21272.054321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32735.292240, 23577.262200, 313.737609, 313.737609, 0.000000, X, Y) && !ellipse(28189.320000, 25814.145000, 1143.640033, 1143.640033, 0.000000, X, Y) && !ellipse(28459.780000, 25953.320000, 1663.920048, 1663.920048, 0.000000, X, Y) && !ellipse(28893.320000, 24672.050000, 244.508007, 244.508007, 0.000000, X, Y) && !ellipse(30120.297882, 26916.375793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27409.486000, 25832.280000, 1356.808039, 740.471221, 127.022800, X, Y) && !ellipse(32559.047960, 24258.085200, 251.764007, 251.764007, 0.000000, X, Y) && !ellipse(35145.335800, 20283.818400, 516.621615, 333.244010, 299.373300, X, Y) && !ellipse(28609.916400, 23418.900400, 313.336009, 313.336009, 0.000000, X, Y) && !ellipse(29068.778000, 25385.742000, 1278.488037, 1278.488037, 0.000000, X, Y) && !ellipse(34374.103516, 22404.012787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29445.062866, 24652.549133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27520.450714, 24315.920624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29559.505249, 25183.390381, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 14:51:07 2012] Writing fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src85.gif
[Mon Feb 27 15:38:59 2012] Mean detx,y = (-4600.31, -1026.66) 
[Mon Feb 27 15:39:01 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 15:39:55 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 15:39:55 2012] Setting source spectrum file to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Mon Feb 27 15:39:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src85_bgd.pi.gz
[Mon Feb 27 22:00:54 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:54 2012] Error reading totcts from fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Mon Feb 27 22:00:58 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:58 2012] Using photon index=1.80, rate=0.00987, arf fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src85.arf
[Mon Feb 27 22:00:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:58 2012] Updating source flux to 1.1e-13
[Mon Feb 27 22:10:31 2012] Flag b found in src. 85 procflags, skipping spectral fitting
[Mon Feb 27 22:10:31 2012] Flag c found in src. 85 procflags, skipping spectral fitting