[Sat Feb 25 10:17:17 2012] Detection parameters:
  Position = (354.3, 310.1) = 0 42 31.07 41 16 20.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1755.0 +/- 51.5
  Background counts = 37.8
  Rate = 0.09 +/- 0.003

[Sat Feb 25 10:17:27 2012] Off-axis axis estimate = 4.14'
[Sun Feb 26 00:05:36 2012] Using EEF radius (= 8.50 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 00:05:36 2012] Initial guess for spatial extent in simple fitting = 8.50"
[Sun Feb 26 00:05:36 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.038
[Sun Feb 26 00:05:36 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.50"
[Sun Feb 26 05:57:23 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src9.ximg exists
[Sun Feb 26 05:57:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src9.csv
[Sun Feb 26 05:57:23 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Feb 26 05:57:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src9.csv
[Sun Feb 26 05:57:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 05:57:26 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Feb 26 05:57:26 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Feb 26 05:57:26 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Feb 26 05:58:56 2012] Spatial fit model total counts = 2277.990000, observed total counts = 2278.000000
[Sun Feb 26 05:58:56 2012] Offset between fit and detection position for source 8 = 0.103689 pixels
[Sun Feb 26 05:58:56 2012] 2093.137000 total counts/ 953.847000 bgd. counts: snr = 36.888834
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.103689 pixels
  Position = (354.2, 310.1) = 0 42 31.12 41 16 21.0
  Extent = 4.9 (4.6-5.2)", rotation angle = 0
  Source counts = 1139.3 +/- 45.8
  Background counts = 953.8
  Rate = 0.05 +/- 0.002
[Sun Feb 26 05:58:56 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:56 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 05:58:56 2012] Source does appear to be extended
[Sun Feb 26 05:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 05:58:56 2012] Source is confused with source 41
[Sun Feb 26 19:06:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 19:06:09 2012] Initial guess for spatial extent in simple fitting = 4.87"
[Sun Feb 26 19:06:09 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.142
[Sun Feb 26 19:06:09 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 4.87"
[Mon Feb 27 00:35:20 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src9.ximg exists
[Mon Feb 27 00:35:20 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon Feb 27 00:35:20 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src9 appears to have run properly
[Mon Feb 27 00:35:22 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon Feb 27 00:35:22 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Feb 27 00:35:22 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Feb 27 00:36:41 2012] Spatial fit model total counts = 2277.710000, observed total counts = 2278.000000
[Mon Feb 27 00:36:41 2012] Offset between fit and detection position for source 8 = 0.001442 pixels
[Mon Feb 27 00:36:41 2012] 2092.426000 total counts/ 950.656000 bgd. counts: snr = 37.031127
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.001442 pixels
  Position = (354.2, 310.1) = 0 42 31.12 41 16 21.0
  Extent = 4.9 (4.6-5.2)", rotation angle = 0
  Source counts = 1141.8 +/- 45.7
  Background counts = 950.7
  Rate = 0.05 +/- 0.002
[Mon Feb 27 00:36:41 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:36:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:36:41 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 00:36:41 2012] Source does appear to be extended
[Mon Feb 27 00:36:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 14:51:05 2012] Counts = 1141.770000, rescaling region sizes by 2.000000
[Mon Feb 27 14:51:05 2012] XMMSAS src. selection expression = ellipse(30766.484500, 26929.558400, 588.247217, 588.247217, 0.000000, X, Y)
[Mon Feb 27 14:51:05 2012] Writing source region out to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src8_src.reg
[Mon Feb 27 14:51:05 2012] Extracting stamp from image fullrun_mos2_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (320, 276) - (388, 344)
[Mon Feb 27 14:51:05 2012] XMMSAS bgd. selection expression = annulus(30766.484500, 26929.558400, 1960.824056, 3921.648113, X, Y) && !ellipse(29076.488400, 26575.173000, 417.119212, 417.119212, 0.000000, X, Y) && !ellipse(26869.203000, 25777.950400, 495.819214, 495.819214, 0.000000, X, Y) && !ellipse(27157.878000, 27038.004000, 680.987220, 390.078411, 90.000000, X, Y) && !ellipse(28637.404000, 26328.090000, 1774.320051, 1774.320051, 0.000000, X, Y) && !ellipse(29529.497620, 23907.568200, 396.819211, 396.819211, 0.000000, X, Y) && !ellipse(32604.648000, 26002.229600, 330.037609, 330.037609, 0.000000, X, Y) && !ellipse(30537.698000, 23179.782000, 419.964012, 419.964012, 0.000000, X, Y) && !ellipse(33574.732800, 24140.561200, 337.152810, 337.152810, 0.000000, X, Y) && !ellipse(32937.769860, 26527.922400, 300.194409, 300.194409, 0.000000, X, Y) && !ellipse(26721.342651, 26476.928619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32735.292240, 23577.262200, 313.737609, 313.737609, 0.000000, X, Y) && !ellipse(28711.629000, 29802.901600, 384.152811, 384.152811, 0.000000, X, Y) && !ellipse(30727.230200, 30869.484800, 488.667214, 352.379210, 30.913000, X, Y) && !ellipse(28189.320000, 25814.145000, 1143.640033, 1143.640033, 0.000000, X, Y) && !ellipse(26683.055600, 29227.707800, 327.848809, 327.848809, 0.000000, X, Y) && !ellipse(31896.693024, 30398.353790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28459.780000, 25953.320000, 1663.920048, 1663.920048, 0.000000, X, Y) && !ellipse(34799.652600, 29549.468400, 516.048815, 248.960807, 50.627000, X, Y) && !ellipse(28893.320000, 24672.050000, 244.508007, 244.508007, 0.000000, X, Y) && !ellipse(30120.297882, 26916.375793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27409.486000, 25832.280000, 1356.808039, 740.471221, 127.022800, X, Y) && !ellipse(32559.047960, 24258.085200, 251.764007, 251.764007, 0.000000, X, Y) && !ellipse(27527.064960, 28478.260600, 721.204021, 288.750408, 354.398341, X, Y) && !ellipse(34252.891400, 28114.485000, 383.425611, 383.425611, 0.000000, X, Y) && !ellipse(35039.724670, 28924.358521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28609.916400, 23418.900400, 313.336009, 313.336009, 0.000000, X, Y) && !ellipse(29068.778000, 25385.742000, 1278.488037, 1278.488037, 0.000000, X, Y) && !ellipse(34374.103516, 22404.012787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31457.614000, 23351.544000, 1467.288042, 1467.288042, 0.000000, X, Y) && !ellipse(26704.100891, 28590.140778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29445.062866, 24652.549133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26464.211029, 28062.623627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27520.450714, 24315.920624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29559.505249, 25183.390381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28556.060000, 29177.218000, 1260.168036, 1260.168036, 0.000000, X, Y)
[Mon Feb 27 14:51:05 2012] Writing fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src8.gif
[Mon Feb 27 14:59:22 2012] Mean detx,y = (-2262.01, 1890.04) 
[Mon Feb 27 14:59:24 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 14:59:53 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 14:59:54 2012] Setting source spectrum file to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Feb 27 14:59:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon Feb 27 22:00:51 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:51 2012] Error reading totcts from fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Feb 27 22:00:55 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:55 2012] Using photon index=1.80, rate=0.0531, arf fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src8.arf
[Mon Feb 27 22:00:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:55 2012] Updating source flux to 6.5e-13
[Mon Feb 27 22:10:31 2012] Flag c found in src. 8 procflags, skipping spectral fitting