[Sat Feb 25 10:17:25 2012] Detection parameters:
  Position = (268.5, 305.0) = 0 43 4.19 41 16 2.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.8 +/- 14.3
  Background counts = 38.9
  Rate = 0.004 +/- 0.0008

[Sat Feb 25 10:17:27 2012] Off-axis axis estimate = 2.22'
[Sun Feb 26 00:05:36 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 00:05:36 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Sun Feb 26 00:05:36 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.002
[Sun Feb 26 00:05:36 2012] Giving source the simple spatial ID 74 for pass 0, mean size = 7.54"
[Sun Feb 26 05:57:25 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src74.ximg exists
[Sun Feb 26 05:57:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src74.csv
[Sun Feb 26 05:57:25 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src74_1.ximg exists
[Sun Feb 26 05:57:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src74.csv
[Sun Feb 26 05:57:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 05:57:28 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Sun Feb 26 05:57:28 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Sun Feb 26 05:57:28 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src74 appears to have run properly
[Sun Feb 26 05:58:56 2012] Warning, spatial fit 74 centroid is now closest to src. 11
[Sun Feb 26 05:58:56 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:56 2012] Assessing source extent using major
[Sun Feb 26 05:58:56 2012] Source does appear to be extended
[Sun Feb 26 05:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 05:58:56 2012] Source is confused with source 11
[Sun Feb 26 19:06:09 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 19:06:09 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Sun Feb 26 19:06:09 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.002
[Sun Feb 26 19:06:09 2012] Giving source the simple spatial ID 70 for pass 1, mean size = 7.54"
[Mon Feb 27 00:35:21 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src70.ximg exists
[Mon Feb 27 00:35:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src70.csv
[Mon Feb 27 00:35:21 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src70_1.ximg exists
[Mon Feb 27 00:35:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src70.csv
[Mon Feb 27 00:35:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 00:35:24 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Mon Feb 27 00:35:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src70.csv
[Mon Feb 27 00:35:24 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Mon Feb 27 00:35:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src70.csv
[Mon Feb 27 00:35:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 00:36:41 2012] Source 76 is offset by -7.955570 and -0.466251 pixels which is larger than
2 X fitted extent = 0.678644 x 0.678644, not incorporating fit results
[Mon Feb 27 00:36:41 2012] Spatial fit model total counts = 628.823000, observed total counts = 1035.000000
[Mon Feb 27 00:36:41 2012] Poor agreement between spatial fit and data for source 76
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Feb 27 00:36:41 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:36:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:36:41 2012] Assessing source extent using major
[Mon Feb 27 00:36:41 2012] Source does appear to be extended
[Mon Feb 27 00:36:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 14:51:07 2012] XMMSAS src. selection expression = ellipse(23308.703400, 26483.274139, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 14:51:07 2012] Writing source region out to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src76_src.reg
[Mon Feb 27 14:51:07 2012] Extracting stamp from image fullrun_mos2_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (231, 267) - (306, 342)
[Mon Feb 27 14:51:07 2012] XMMSAS bgd. selection expression = annulus(23308.703400, 26483.274139, 1087.500000, 2175.000000, X, Y) && !ellipse(21850.892200, 25136.231000, 408.614412, 408.614412, 0.000000, X, Y) && !ellipse(25391.632400, 26573.760600, 333.640010, 333.640010, 0.000000, X, Y) && !ellipse(23534.824000, 25970.284000, 472.337614, 472.337614, 0.000000, X, Y) && !ellipse(24280.115400, 26628.503200, 361.740010, 361.740010, 0.000000, X, Y) && !ellipse(23384.421800, 29007.694400, 388.784011, 388.784011, 0.000000, X, Y) && !ellipse(24640.500610, 25890.942413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23986.131470, 23914.604980, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 14:51:07 2012] Writing fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src76.gif
[Mon Feb 27 15:41:21 2012] Mean detx,y = (3435.78, -2738.31) 
[Mon Feb 27 15:41:24 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 15:41:41 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 15:41:41 2012] Setting source spectrum file to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Mon Feb 27 15:41:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src76_bgd.pi.gz
[Mon Feb 27 21:45:46 2012] Not generating rmf since there are only 75 counts
[Mon Feb 27 21:45:46 2012] rmf not generated due to insufficient counts
[Mon Feb 27 22:00:54 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:54 2012] Error reading totcts from fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Mon Feb 27 22:00:58 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:58 2012] Using photon index=1.80, rate=0.00403, arf fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src76.arf
[Mon Feb 27 22:00:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:58 2012] Updating source flux to 4.3e-14
[Mon Feb 27 22:10:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting