[Sat Feb 25 10:17:21 2012] Detection parameters:
  Position = (326.7, 297.0) = 0 42 41.72 41 15 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 419.4 +/- 28.5
  Background counts = 47.8
  Rate = 0.02 +/- 0.001

[Sat Feb 25 10:17:27 2012] Off-axis axis estimate = 2.05'
[Sun Feb 26 00:05:36 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 00:05:36 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Sun Feb 26 00:05:36 2012] source mask rpix=1.7, npix_max = 19, mask sum = 19, frac = 0.969
[Sun Feb 26 00:05:36 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 7.45"
[Sun Feb 26 05:57:24 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src33.ximg exists
[Sun Feb 26 05:57:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src33.csv
[Sun Feb 26 05:57:24 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src33_1.ximg exists
[Sun Feb 26 05:57:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src33.csv
[Sun Feb 26 05:57:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 05:57:27 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sun Feb 26 05:57:27 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sun Feb 26 05:57:27 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Sun Feb 26 05:58:56 2012] Warning, spatial fit 33 centroid is now closest to src. 48
[Sun Feb 26 05:58:56 2012] Source 45 is offset by -7.375579 and -0.975258 pixels which is larger than
2 X fitted extent = 6.080046 x 6.080046, not incorporating fit results
[Sun Feb 26 05:58:56 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:56 2012] Assessing source extent using major
[Sun Feb 26 05:58:56 2012] Source does appear to be extended
[Sun Feb 26 05:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 05:58:57 2012] Source is confused with source 48
[Sun Feb 26 19:06:09 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 19:06:09 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Sun Feb 26 19:06:09 2012] source mask rpix=1.7, npix_max = 19, mask sum = 19, frac = 0.969
[Sun Feb 26 19:06:09 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 7.45"
[Mon Feb 27 00:35:20 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src33.ximg exists
[Mon Feb 27 00:35:20 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src33_1.ximg exists
[Mon Feb 27 00:35:20 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src33 appears to have run properly
[Mon Feb 27 00:35:23 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Mon Feb 27 00:35:23 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Mon Feb 27 00:35:23 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Mon Feb 27 00:36:41 2012] Spatial fit model total counts = 5892.180000, observed total counts = 5885.000000
[Mon Feb 27 00:36:41 2012] Offset between fit and detection position for source 45 = 2.075846 pixels
[Mon Feb 27 00:36:41 2012] Warning, changing simple spatial fit ID from 33 to 5
[Mon Feb 27 00:36:41 2012] 5897.960000 total counts/ 3773.450000 bgd. counts: snr = 34.585135
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 2.075846 pixels
  Position = (327.7, 298.9) = 0 42 41.35 41 15 32.3
  Extent = 20.8 (20.4-41.6)", rotation angle = 0
  Source counts = 2124.5 +/- 76.8
  Background counts = 3773.4
  Rate = 0.1 +/- 0.004
[Mon Feb 27 00:36:41 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:36:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:36:41 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 00:36:41 2012] Source does appear to be extended
[Mon Feb 27 00:36:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 14:51:05 2012] Counts = 2124.510000, rescaling region sizes by 2.000000
[Mon Feb 27 14:51:05 2012] XMMSAS src. selection expression = ellipse(28459.780000, 25953.320000, 2495.880072, 2495.880072, 0.000000, X, Y)
[Mon Feb 27 14:51:05 2012] Writing source region out to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src45_src.reg
[Mon Feb 27 14:51:05 2012] Extracting stamp from image fullrun_mos2_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (184, 155) - (471, 442)
[Mon Feb 27 14:51:05 2012] XMMSAS bgd. selection expression = annulus(28459.780000, 25953.320000, 8319.600239, 16639.200479, X, Y) && !ellipse(29076.488400, 26575.173000, 417.119212, 417.119212, 0.000000, X, Y) && !ellipse(21850.892200, 25136.231000, 408.614412, 408.614412, 0.000000, X, Y) && !ellipse(26869.203000, 25777.950400, 495.819214, 495.819214, 0.000000, X, Y) && !ellipse(27157.878000, 27038.004000, 680.987220, 390.078411, 90.000000, X, Y) && !ellipse(28637.404000, 26328.090000, 1774.320051, 1774.320051, 0.000000, X, Y) && !ellipse(29529.497620, 23907.568200, 396.819211, 396.819211, 0.000000, X, Y) && !ellipse(25391.632400, 26573.760600, 333.640010, 333.640010, 0.000000, X, Y) && !ellipse(25941.315800, 29997.095200, 395.018411, 357.134410, 1.839260, X, Y) && !ellipse(30766.484500, 26929.558400, 392.164811, 392.164811, 0.000000, X, Y) && !ellipse(23534.824000, 25970.284000, 472.337614, 472.337614, 0.000000, X, Y) && !ellipse(31404.807000, 22158.465000, 402.497612, 371.717611, 258.532000, X, Y) && !ellipse(32604.648000, 26002.229600, 330.037609, 330.037609, 0.000000, X, Y) && !ellipse(30537.698000, 23179.782000, 419.964012, 419.964012, 0.000000, X, Y) && !ellipse(26113.476000, 26104.542000, 534.196015, 534.196015, 0.000000, X, Y) && !ellipse(33574.732800, 24140.561200, 337.152810, 337.152810, 0.000000, X, Y) && !ellipse(24325.627260, 30492.315000, 451.476813, 379.500011, 179.081000, X, Y) && !ellipse(24280.115400, 26628.503200, 361.740010, 361.740010, 0.000000, X, Y) && !ellipse(23384.421800, 29007.694400, 388.784011, 388.784011, 0.000000, X, Y) && !ellipse(32937.769860, 26527.922400, 300.194409, 300.194409, 0.000000, X, Y) && !ellipse(31434.003723, 19333.719650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33648.874000, 22179.690000, 395.823211, 395.823211, 0.000000, X, Y) && !ellipse(26721.342651, 26476.928619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15879.134918, 25004.481232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27662.747009, 21272.054321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41255.495176, 20752.860244, 638.966333, 296.174782, 108.730422, X, Y) && !ellipse(32735.292240, 23577.262200, 313.737609, 313.737609, 0.000000, X, Y) && !ellipse(28711.629000, 29802.901600, 384.152811, 384.152811, 0.000000, X, Y) && !ellipse(30727.230200, 30869.484800, 488.667214, 352.379210, 30.913000, X, Y) && !ellipse(17623.627228, 16669.492004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28189.320000, 25814.145000, 1143.640033, 1143.640033, 0.000000, X, Y) && !ellipse(26683.055600, 29227.707800, 327.848809, 327.848809, 0.000000, X, Y) && !ellipse(31896.693024, 30398.353790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34799.652600, 29549.468400, 516.048815, 248.960807, 50.627000, X, Y) && !ellipse(29850.437000, 31430.718620, 347.908810, 347.908810, 0.000000, X, Y) && !ellipse(36044.772000, 29309.862000, 213.048806, 213.048806, 0.000000, X, Y) && !ellipse(25376.730028, 38475.186911, 726.027602, 337.463842, 7.309205, X, Y) && !ellipse(28893.320000, 24672.050000, 244.508007, 244.508007, 0.000000, X, Y) && !ellipse(16938.867294, 20142.027390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35726.252000, 28580.436000, 544.472016, 544.472016, 0.000000, X, Y) && !ellipse(21064.752200, 16093.408600, 337.702410, 337.702410, 0.000000, X, Y) && !ellipse(16530.489273, 23369.033630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14218.723268, 36334.904800, 819.984024, 300.397609, 131.031400, X, Y) && !ellipse(30120.297882, 26916.375793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27409.486000, 25832.280000, 1356.808039, 740.471221, 127.022800, X, Y) && !ellipse(19814.078171, 23464.242981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32559.047960, 24258.085200, 251.764007, 251.764007, 0.000000, X, Y) && !ellipse(23483.818800, 32925.623000, 506.939215, 506.939215, 0.000000, X, Y) && !ellipse(35145.335800, 20283.818400, 516.621615, 333.244010, 299.373300, X, Y) && !ellipse(27527.064960, 28478.260600, 721.204021, 288.750408, 354.398341, X, Y) && !ellipse(17964.648060, 29524.845600, 525.273615, 525.273615, 0.000000, X, Y) && !ellipse(34252.891400, 28114.485000, 383.425611, 383.425611, 0.000000, X, Y) && !ellipse(25311.877869, 29634.021301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35754.066400, 32278.985000, 471.486414, 471.486414, 0.000000, X, Y) && !ellipse(25964.899470, 27476.501600, 268.746408, 268.746408, 0.000000, X, Y) && !ellipse(31293.316376, 12820.804016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22300.063819, 22650.940696, 475.903633, 317.763826, 39.448802, X, Y) && !ellipse(35039.724670, 28924.358521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28609.916400, 23418.900400, 313.336009, 313.336009, 0.000000, X, Y) && !ellipse(29068.778000, 25385.742000, 1278.488037, 1278.488037, 0.000000, X, Y) && !ellipse(19489.106200, 28741.025200, 372.436265, 372.436265, 0.000000, X, Y) && !ellipse(31883.425000, 38358.426120, 438.459213, 438.459213, 0.000000, X, Y) && !ellipse(34374.103516, 22404.012787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32239.534865, 36154.521223, 467.680856, 197.960750, 27.696439, X, Y) && !ellipse(19852.836288, 24195.756653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23565.797000, 19606.700280, 465.696813, 465.696813, 0.000000, X, Y) && !ellipse(24640.500610, 25890.942413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24789.997345, 20822.719818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31457.614000, 23351.544000, 1467.288042, 1467.288042, 0.000000, X, Y) && !ellipse(26704.100891, 28590.140778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29445.062866, 24652.549133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24743.492040, 20311.150600, 403.668012, 403.668012, 0.000000, X, Y) && !ellipse(23308.703400, 26483.274139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26464.211029, 28062.623627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27520.450714, 24315.920624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42011.247498, 30409.151794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29559.505249, 25183.390381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39710.104401, 24916.177612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23986.131470, 23914.604980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31143.856812, 42203.928284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28556.060000, 29177.218000, 1260.168036, 1260.168036, 0.000000, X, Y) && !ellipse(20544.780731, 11873.974106, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 14:51:05 2012] Writing fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src45.gif
[Mon Feb 27 15:10:35 2012] Mean detx,y = (-621.60, -55.74) 
[Mon Feb 27 15:10:41 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 15:21:01 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 15:21:01 2012] Setting source spectrum file to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Mon Feb 27 15:21:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Mon Feb 27 22:00:52 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:52 2012] Error reading totcts from fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Mon Feb 27 22:00:57 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:57 2012] Using photon index=1.80, rate=0.0988, arf fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src45.arf
[Mon Feb 27 22:00:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:57 2012] Updating source flux to 8.8e-13
[Mon Feb 27 22:10:31 2012] Flag b found in src. 45 procflags, skipping spectral fitting
[Mon Feb 27 22:10:31 2012] Flag c found in src. 45 procflags, skipping spectral fitting