[Sat Feb 25 10:17:21 2012] Detection parameters:
  Position = (318.3, 298.3) = 0 42 44.98 41 15 25.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 283.9 +/- 25.1
  Background counts = 49.7
  Rate = 0.01 +/- 0.001

[Sat Feb 25 10:17:27 2012] Off-axis axis estimate = 1.44'
[Sun Feb 26 00:05:36 2012] Using EEF radius (= 7.15 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 00:05:36 2012] Initial guess for spatial extent in simple fitting = 7.15"
[Sun Feb 26 00:05:36 2012] source mask rpix=1.6, npix_max = 18, mask sum = 15, frac = 0.816
[Sun Feb 26 00:05:36 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 7.15"
[Sun Feb 26 05:57:24 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src45.ximg exists
[Sun Feb 26 05:57:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src45.csv
[Sun Feb 26 05:57:24 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src45_1.ximg exists
[Sun Feb 26 05:57:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src45.csv
[Sun Feb 26 05:57:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 05:57:27 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Sun Feb 26 05:57:27 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Sun Feb 26 05:57:27 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Sun Feb 26 05:58:56 2012] Source 44 is offset by 0.145472 and 2.779208 pixels which is larger than
2 X fitted extent = 1.397931 x 1.397931, not incorporating fit results
[Sun Feb 26 05:58:56 2012] Warning, spatial fit 45 centroid is now closest to src. 5
[Sun Feb 26 05:58:56 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:56 2012] Assessing source extent using major
[Sun Feb 26 05:58:56 2012] Source does appear to be extended
[Sun Feb 26 05:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 05:58:57 2012] Source is confused with source 48
[Sun Feb 26 19:06:09 2012] Using EEF radius (= 7.15 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 19:06:09 2012] Initial guess for spatial extent in simple fitting = 7.15"
[Sun Feb 26 19:06:09 2012] source mask rpix=1.6, npix_max = 18, mask sum = 15, frac = 0.816
[Sun Feb 26 19:06:09 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 7.15"
[Mon Feb 27 00:35:20 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src44.ximg exists
[Mon Feb 27 00:35:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src44.csv
[Mon Feb 27 00:35:20 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src44_1.ximg exists
[Mon Feb 27 00:35:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src44.csv
[Mon Feb 27 00:35:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 00:35:23 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Mon Feb 27 00:35:23 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Mon Feb 27 00:35:23 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Mon Feb 27 00:36:41 2012] Spatial fit model total counts = 2836.280000, observed total counts = 2833.000000
[Mon Feb 27 00:36:41 2012] Offset between fit and detection position for source 44 = 2.798340 pixels
[Mon Feb 27 00:36:41 2012] Warning, changing simple spatial fit ID from 44 to 30
[Mon Feb 27 00:36:41 2012] 2745.057000 total counts/ 2505.050000 bgd. counts: snr = 4.795299
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 2.798340 pixels
  Position = (315.6, 297.5) = 0 42 46.01 41 15 26.2
  Extent = 17.0 (10.3-27.3)" x 9.3 (7.8-11.1)", rotation angle = 127 (279-324) degrees
  Source counts = 240.0 +/- 52.4
  Background counts = 2505.1
  Rate = 0.01 +/- 0.002
[Mon Feb 27 00:36:41 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:36:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:36:41 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 00:36:41 2012] Source does appear to be extended
[Mon Feb 27 00:36:41 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.94
[Mon Feb 27 14:51:06 2012] XMMSAS src. selection expression = ellipse(27409.486000, 25832.280000, 1017.606029, 555.353416, 127.022800, X, Y)
[Mon Feb 27 14:51:06 2012] Writing source region out to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src44_src.reg
[Mon Feb 27 14:51:06 2012] Extracting stamp from image fullrun_mos2_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (257, 239) - (374, 356)
[Mon Feb 27 14:51:06 2012] XMMSAS bgd. selection expression = annulus(27409.486000, 25832.280000, 1696.010049, 3392.020098, X, Y) && !ellipse(29076.488400, 26575.173000, 417.119212, 417.119212, 0.000000, X, Y) && !ellipse(26869.203000, 25777.950400, 495.819214, 495.819214, 0.000000, X, Y) && !ellipse(27157.878000, 27038.004000, 680.987220, 390.078411, 90.000000, X, Y) && !ellipse(28637.404000, 26328.090000, 1774.320051, 1774.320051, 0.000000, X, Y) && !ellipse(29529.497620, 23907.568200, 396.819211, 396.819211, 0.000000, X, Y) && !ellipse(25391.632400, 26573.760600, 333.640010, 333.640010, 0.000000, X, Y) && !ellipse(30766.484500, 26929.558400, 392.164811, 392.164811, 0.000000, X, Y) && !ellipse(30537.698000, 23179.782000, 419.964012, 419.964012, 0.000000, X, Y) && !ellipse(26113.476000, 26104.542000, 534.196015, 534.196015, 0.000000, X, Y) && !ellipse(24280.115400, 26628.503200, 361.740010, 361.740010, 0.000000, X, Y) && !ellipse(26721.342651, 26476.928619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28189.320000, 25814.145000, 1143.640033, 1143.640033, 0.000000, X, Y) && !ellipse(26683.055600, 29227.707800, 327.848809, 327.848809, 0.000000, X, Y) && !ellipse(28459.780000, 25953.320000, 1663.920048, 1663.920048, 0.000000, X, Y) && !ellipse(28893.320000, 24672.050000, 244.508007, 244.508007, 0.000000, X, Y) && !ellipse(30120.297882, 26916.375793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27527.064960, 28478.260600, 721.204021, 288.750408, 354.398341, X, Y) && !ellipse(25311.877869, 29634.021301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25964.899470, 27476.501600, 268.746408, 268.746408, 0.000000, X, Y) && !ellipse(28609.916400, 23418.900400, 313.336009, 313.336009, 0.000000, X, Y) && !ellipse(29068.778000, 25385.742000, 1278.488037, 1278.488037, 0.000000, X, Y) && !ellipse(24640.500610, 25890.942413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31457.614000, 23351.544000, 1467.288042, 1467.288042, 0.000000, X, Y) && !ellipse(26704.100891, 28590.140778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29445.062866, 24652.549133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23308.703400, 26483.274139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26464.211029, 28062.623627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27520.450714, 24315.920624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29559.505249, 25183.390381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23986.131470, 23914.604980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28556.060000, 29177.218000, 1260.168036, 1260.168036, 0.000000, X, Y)
[Mon Feb 27 14:51:06 2012] Writing fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src44.gif
[Mon Feb 27 15:26:14 2012] Mean detx,y = (184.04, -895.78) 
[Mon Feb 27 15:26:16 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 15:26:37 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 15:26:37 2012] Setting source spectrum file to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Mon Feb 27 15:26:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Mon Feb 27 22:00:53 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:53 2012] Error reading totcts from fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Mon Feb 27 22:00:57 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:57 2012] Using photon index=1.80, rate=0.0112, arf fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src44.arf
[Mon Feb 27 22:00:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:57 2012] Updating source flux to 1.3e-13
[Mon Feb 27 22:10:31 2012] Flag b found in src. 44 procflags, skipping spectral fitting
[Mon Feb 27 22:10:31 2012] Flag c found in src. 44 procflags, skipping spectral fitting