[Sat Feb 25 10:17:21 2012] Detection parameters:
  Position = (307.7, 304.9) = 0 42 49.05 41 16 0.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 749.8 +/- 38.3
  Background counts = 49.6
  Rate = 0.04 +/- 0.002

[Sat Feb 25 10:17:27 2012] Off-axis axis estimate = 0.82'
[Sun Feb 26 00:05:36 2012] Using EEF radius (= 6.84 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 00:05:36 2012] Initial guess for spatial extent in simple fitting = 6.84"
[Sun Feb 26 00:05:36 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.932
[Sun Feb 26 00:05:36 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 6.84"
[Sun Feb 26 05:57:23 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src22.ximg exists
[Sun Feb 26 05:57:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src22.csv
[Sun Feb 26 05:57:23 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src22_1.ximg exists
[Sun Feb 26 05:57:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src22.csv
[Sun Feb 26 05:57:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 05:57:26 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sun Feb 26 05:57:26 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sun Feb 26 05:57:26 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Sun Feb 26 05:58:56 2012] Source 42 is offset by -3.620406 and 1.570237 pixels which is larger than
2 X fitted extent = 0.835035 x 0.835035, not incorporating fit results
[Sun Feb 26 05:58:56 2012] Warning, spatial fit 22 centroid is now closest to src. 9
[Sun Feb 26 05:58:56 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:56 2012] Assessing source extent using major
[Sun Feb 26 05:58:56 2012] Source does appear to be extended
[Sun Feb 26 05:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 19:06:09 2012] Using EEF radius (= 6.84 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 19:06:09 2012] Initial guess for spatial extent in simple fitting = 6.84"
[Sun Feb 26 19:06:09 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.932
[Sun Feb 26 19:06:09 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 6.84"
[Mon Feb 27 00:35:20 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src22.ximg exists
[Mon Feb 27 00:35:20 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src22_1.ximg exists
[Mon Feb 27 00:35:20 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src22 appears to have run properly
[Mon Feb 27 00:35:22 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Mon Feb 27 00:35:22 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Mon Feb 27 00:35:22 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Mon Feb 27 00:36:41 2012] Source 42 is offset by 0.559157 and 8.291570 pixels which is larger than
2 X fitted extent = 1.787917 x 1.787917, not incorporating fit results
[Mon Feb 27 00:36:41 2012] Warning, spatial fit 22 centroid is now closest to src. 7
[Mon Feb 27 00:36:41 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:36:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:36:41 2012] Assessing source extent using major
[Mon Feb 27 00:36:41 2012] Source does appear to be extended
[Mon Feb 27 00:36:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 00:36:41 2012] Source is confused with source 44
[Mon Feb 27 14:51:05 2012] XMMSAS src. selection expression = ellipse(26721.342651, 26476.928619, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 14:51:05 2012] Writing source region out to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src42_src.reg
[Mon Feb 27 14:51:05 2012] Extracting stamp from image fullrun_mos2_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (270, 267) - (345, 342)
[Mon Feb 27 14:51:05 2012] XMMSAS bgd. selection expression = annulus(26721.342651, 26476.928619, 1087.500000, 2175.000000, X, Y) && !ellipse(29076.488400, 26575.173000, 417.119212, 417.119212, 0.000000, X, Y) && !ellipse(26869.203000, 25777.950400, 495.819214, 495.819214, 0.000000, X, Y) && !ellipse(27157.878000, 27038.004000, 680.987220, 390.078411, 90.000000, X, Y) && !ellipse(28637.404000, 26328.090000, 1774.320051, 1774.320051, 0.000000, X, Y) && !ellipse(25391.632400, 26573.760600, 333.640010, 333.640010, 0.000000, X, Y) && !ellipse(26113.476000, 26104.542000, 534.196015, 534.196015, 0.000000, X, Y) && !ellipse(24280.115400, 26628.503200, 361.740010, 361.740010, 0.000000, X, Y) && !ellipse(28189.320000, 25814.145000, 1143.640033, 1143.640033, 0.000000, X, Y) && !ellipse(28459.780000, 25953.320000, 1663.920048, 1663.920048, 0.000000, X, Y) && !ellipse(28893.320000, 24672.050000, 244.508007, 244.508007, 0.000000, X, Y) && !ellipse(27409.486000, 25832.280000, 1356.808039, 740.471221, 127.022800, X, Y) && !ellipse(27527.064960, 28478.260600, 721.204021, 288.750408, 354.398341, X, Y) && !ellipse(25964.899470, 27476.501600, 268.746408, 268.746408, 0.000000, X, Y) && !ellipse(29068.778000, 25385.742000, 1278.488037, 1278.488037, 0.000000, X, Y) && !ellipse(24640.500610, 25890.942413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26704.100891, 28590.140778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29445.062866, 24652.549133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26464.211029, 28062.623627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27520.450714, 24315.920624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29559.505249, 25183.390381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23986.131470, 23914.604980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28556.060000, 29177.218000, 1260.168036, 1260.168036, 0.000000, X, Y)
[Mon Feb 27 14:51:05 2012] Writing fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src42.gif
[Mon Feb 27 15:05:17 2012] Mean detx,y = (701.34, -682.59) 
[Mon Feb 27 15:05:19 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 15:05:39 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 15:05:39 2012] Setting source spectrum file to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Mon Feb 27 15:05:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Mon Feb 27 18:06:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 27 18:06:09 2012] rmf not generated due to insufficient counts
[Mon Feb 27 22:00:52 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:52 2012] Error reading totcts from fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Mon Feb 27 22:00:56 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:56 2012] Using photon index=1.80, rate=0.0355, arf fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src42.arf
[Mon Feb 27 22:00:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:56 2012] Updating source flux to 3.9e-13
[Mon Feb 27 22:10:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting