[Sat Feb 25 10:17:21 2012] Detection parameters:
  Position = (346.8, 309.9) = 0 42 33.98 41 16 19.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 297.4 +/- 24.6
  Background counts = 40.7
  Rate = 0.01 +/- 0.001

[Sat Feb 25 10:17:27 2012] Off-axis axis estimate = 3.60'
[Sun Feb 26 00:05:36 2012] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 00:05:36 2012] Initial guess for spatial extent in simple fitting = 8.23"
[Sun Feb 26 00:05:36 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.874
[Sun Feb 26 00:05:36 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 8.23"
[Sun Feb 26 05:57:24 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src44.ximg exists
[Sun Feb 26 05:57:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src44.csv
[Sun Feb 26 05:57:24 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src44_1.ximg exists
[Sun Feb 26 05:57:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src44.csv
[Sun Feb 26 05:57:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 05:57:27 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Sun Feb 26 05:57:27 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Sun Feb 26 05:57:27 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Sun Feb 26 05:58:56 2012] Source 41 is offset by 7.335171 and 3.346940 pixels which is larger than
2 X fitted extent = 2.487715 x 2.487715, not incorporating fit results
[Sun Feb 26 05:58:56 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:56 2012] Assessing source extent using major
[Sun Feb 26 05:58:56 2012] Source does appear to be extended
[Sun Feb 26 05:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 05:58:56 2012] Source is confused with source 8
[Sun Feb 26 19:06:09 2012] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 19:06:09 2012] Initial guess for spatial extent in simple fitting = 8.23"
[Sun Feb 26 19:06:09 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.874
[Sun Feb 26 19:06:09 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 8.23"
[Mon Feb 27 00:35:20 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src43.ximg exists
[Mon Feb 27 00:35:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src43.csv
[Mon Feb 27 00:35:20 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src43_1.ximg exists
[Mon Feb 27 00:35:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src43.csv
[Mon Feb 27 00:35:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 00:35:23 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Mon Feb 27 00:35:23 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Mon Feb 27 00:35:23 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Mon Feb 27 00:36:41 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 36.440252 pixels away
[Mon Feb 27 00:36:41 2012] Source 41 is offset by 7.335171 and 3.123216 pixels which is larger than
2 X fitted extent = 3.093499 x 3.093499, not incorporating fit results
[Mon Feb 27 00:36:41 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:36:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:36:41 2012] Assessing source extent using major
[Mon Feb 27 00:36:41 2012] Source does appear to be extended
[Mon Feb 27 00:36:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 14:51:06 2012] XMMSAS src. selection expression = ellipse(30120.297882, 26916.375793, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 14:51:06 2012] Writing source region out to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src41_src.reg
[Mon Feb 27 14:51:06 2012] Extracting stamp from image fullrun_mos2_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (309, 272) - (384, 347)
[Mon Feb 27 14:51:06 2012] XMMSAS bgd. selection expression = annulus(30120.297882, 26916.375793, 1087.500000, 2175.000000, X, Y) && !ellipse(29076.488400, 26575.173000, 417.119212, 417.119212, 0.000000, X, Y) && !ellipse(28637.404000, 26328.090000, 1774.320051, 1774.320051, 0.000000, X, Y) && !ellipse(30766.484500, 26929.558400, 392.164811, 392.164811, 0.000000, X, Y) && !ellipse(32604.648000, 26002.229600, 330.037609, 330.037609, 0.000000, X, Y) && !ellipse(28189.320000, 25814.145000, 1143.640033, 1143.640033, 0.000000, X, Y) && !ellipse(28459.780000, 25953.320000, 1663.920048, 1663.920048, 0.000000, X, Y) && !ellipse(28893.320000, 24672.050000, 244.508007, 244.508007, 0.000000, X, Y) && !ellipse(27409.486000, 25832.280000, 1356.808039, 740.471221, 127.022800, X, Y) && !ellipse(27527.064960, 28478.260600, 721.204021, 288.750408, 354.398341, X, Y) && !ellipse(29068.778000, 25385.742000, 1278.488037, 1278.488037, 0.000000, X, Y) && !ellipse(31457.614000, 23351.544000, 1467.288042, 1467.288042, 0.000000, X, Y) && !ellipse(29445.062866, 24652.549133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27520.450714, 24315.920624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29559.505249, 25183.390381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28556.060000, 29177.218000, 1260.168036, 1260.168036, 0.000000, X, Y)
[Mon Feb 27 14:51:06 2012] Writing fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src41.gif
[Mon Feb 27 15:25:52 2012] Mean detx,y = (-1891.90, 1617.91) 
[Mon Feb 27 15:25:54 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 15:26:06 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 15:26:07 2012] Setting source spectrum file to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Mon Feb 27 15:26:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Mon Feb 27 20:53:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 27 20:53:44 2012] rmf not generated due to insufficient counts
[Mon Feb 27 22:00:53 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:53 2012] Error reading totcts from fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Mon Feb 27 22:00:57 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:57 2012] Using photon index=1.80, rate=0.015, arf fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src41.arf
[Mon Feb 27 22:00:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:57 2012] Updating source flux to 1.5e-13
[Mon Feb 27 22:10:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting