[Sat Feb 25 10:17:21 2012] Detection parameters:
  Position = (299.3, 316.1) = 0 42 52.31 41 16 48.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 226.6 +/- 22.2
  Background counts = 46.2
  Rate = 0.01 +/- 0.001

[Sat Feb 25 10:17:27 2012] Off-axis axis estimate = 1.28'
[Sun Feb 26 00:05:36 2012] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 00:05:36 2012] Initial guess for spatial extent in simple fitting = 7.07"
[Sun Feb 26 00:05:36 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.885
[Sun Feb 26 00:05:36 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 7.07"
[Sun Feb 26 05:57:24 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src55.ximg exists
[Sun Feb 26 05:57:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src55.csv
[Sun Feb 26 05:57:24 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src55_1.ximg exists
[Sun Feb 26 05:57:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src55.csv
[Sun Feb 26 05:57:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 05:57:27 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Sun Feb 26 05:57:27 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Sun Feb 26 05:57:28 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Sun Feb 26 05:58:56 2012] Spatial fit model total counts = 1281.970000, observed total counts = 1277.000000
[Sun Feb 26 05:58:56 2012] Offset between fit and detection position for source 40 = 0.354359 pixels
[Sun Feb 26 05:58:56 2012] 1258.990200 total counts/ 1190.250000 bgd. counts: snr = 1.992470
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.354359 pixels
  Position = (299.0, 316.4) = 0 42 52.41 41 16 48.4
  Extent = 3.3 (2.5-5.2)", rotation angle = 0
  Source counts = 68.7 +/- 35.5
  Background counts = 1190.2
  Rate = 0.003 +/- 0.002
[Sun Feb 26 05:58:56 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:56 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 05:58:56 2012] Source does appear to be extended
[Sun Feb 26 05:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 19:06:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 19:06:09 2012] Initial guess for spatial extent in simple fitting = 3.31"
[Sun Feb 26 19:06:09 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.944
[Sun Feb 26 19:06:09 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 3.31"
[Mon Feb 27 00:35:21 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src54.ximg exists
[Mon Feb 27 00:35:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src54.csv
[Mon Feb 27 00:35:21 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src54_1.ximg exists
[Mon Feb 27 00:35:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src54.csv
[Mon Feb 27 00:35:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 00:35:23 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Mon Feb 27 00:35:23 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Mon Feb 27 00:35:23 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Mon Feb 27 00:36:41 2012] Spatial fit model total counts = 1276.930000, observed total counts = 1277.000000
[Mon Feb 27 00:36:41 2012] Offset between fit and detection position for source 40 = 0.008347 pixels
[Mon Feb 27 00:36:41 2012] 1252.180700 total counts/ 1183.480000 bgd. counts: snr = 1.997012
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.008347 pixels
  Position = (299.0, 316.4) = 0 42 52.41 41 16 48.5
  Extent = 3.4 (2.5-5.2)", rotation angle = 0
  Source counts = 68.7 +/- 35.4
  Background counts = 1183.5
  Rate = 0.003 +/- 0.002
[Mon Feb 27 00:36:41 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:36:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:36:41 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 00:36:41 2012] Source does appear to be extended
[Mon Feb 27 00:36:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 14:51:06 2012] XMMSAS src. selection expression = ellipse(25964.899470, 27476.501600, 201.559806, 201.559806, 0.000000, X, Y)
[Mon Feb 27 14:51:06 2012] Writing source region out to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src40_src.reg
[Mon Feb 27 14:51:06 2012] Extracting stamp from image fullrun_mos2_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (287, 305) - (311, 328)
[Mon Feb 27 14:51:06 2012] XMMSAS bgd. selection expression = annulus(25964.899470, 27476.501600, 335.933010, 671.866019, X, Y) && !ellipse(27157.878000, 27038.004000, 680.987220, 390.078411, 90.000000, X, Y) && !ellipse(25391.632400, 26573.760600, 333.640010, 333.640010, 0.000000, X, Y) && !ellipse(26721.342651, 26476.928619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27409.486000, 25832.280000, 1356.808039, 740.471221, 127.022800, X, Y) && !ellipse(26704.100891, 28590.140778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26464.211029, 28062.623627, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 14:51:06 2012] Writing fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src40.gif
[Mon Feb 27 15:30:51 2012] Mean detx,y = (2012.55, -304.56) 
[Mon Feb 27 15:30:53 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 15:31:06 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 15:31:07 2012] Setting source spectrum file to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Mon Feb 27 15:31:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Mon Feb 27 21:25:48 2012] Not generating rmf since there are only 68 counts
[Mon Feb 27 21:25:48 2012] rmf not generated due to insufficient counts
[Mon Feb 27 22:00:53 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:53 2012] Error reading totcts from fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Mon Feb 27 22:00:57 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:57 2012] Using photon index=1.80, rate=0.00319, arf fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src40.arf
[Mon Feb 27 22:00:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:57 2012] Updating source flux to 4.6e-14
[Mon Feb 27 22:10:31 2012] Source 40 has fewer than 100.000000 counts, skipping spectral fitting