[Sat Feb 25 10:17:20 2012] Detection parameters:
  Position = (291.5, 341.2) = 0 42 55.31 41 18 37.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 212.0 +/- 20.6
  Background counts = 35.8
  Rate = 0.01 +/- 0.001

[Sat Feb 25 10:17:27 2012] Off-axis axis estimate = 3.14'
[Sun Feb 26 00:05:36 2012] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 00:05:36 2012] Initial guess for spatial extent in simple fitting = 8.00"
[Sun Feb 26 00:05:36 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.143
[Sun Feb 26 00:05:36 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 8.00"
[Sun Feb 26 05:57:24 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src53.ximg exists
[Sun Feb 26 05:57:24 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src53_1.ximg exists
[Sun Feb 26 05:57:24 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src53 appears to have run properly
[Sun Feb 26 05:57:27 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Sun Feb 26 05:57:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src53.csv
[Sun Feb 26 05:57:27 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Sun Feb 26 05:57:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src53.csv
[Sun Feb 26 05:57:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 05:58:56 2012] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 12.143773 pixels away
[Sun Feb 26 05:58:56 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:56 2012] Assessing source extent using major
[Sun Feb 26 05:58:56 2012] Source does appear to be extended
[Sun Feb 26 05:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 19:06:09 2012] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 19:06:09 2012] Initial guess for spatial extent in simple fitting = 8.00"
[Sun Feb 26 19:06:09 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.143
[Sun Feb 26 19:06:09 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 8.00"
[Mon Feb 27 00:35:21 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src52.ximg exists
[Mon Feb 27 00:35:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src52.csv
[Mon Feb 27 00:35:21 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src52_1.ximg exists
[Mon Feb 27 00:35:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src52.csv
[Mon Feb 27 00:35:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 00:35:23 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Mon Feb 27 00:35:23 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Mon Feb 27 00:35:23 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Mon Feb 27 00:36:41 2012] Warning: source 47 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 51.163267 pixels away
[Mon Feb 27 00:36:41 2012] Source 34 is offset by -6.626093 and -4.268560 pixels which is larger than
2 X fitted extent = 1.827315 x 1.827315, not incorporating fit results
[Mon Feb 27 00:36:41 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:36:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:36:41 2012] Assessing source extent using major
[Mon Feb 27 00:36:41 2012] Source does appear to be extended
[Mon Feb 27 00:36:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 14:51:06 2012] XMMSAS src. selection expression = ellipse(25311.877869, 29634.021301, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 14:51:06 2012] Writing source region out to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src34_src.reg
[Mon Feb 27 14:51:06 2012] Extracting stamp from image fullrun_mos2_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (254, 304) - (329, 379)
[Mon Feb 27 14:51:06 2012] XMMSAS bgd. selection expression = annulus(25311.877869, 29634.021301, 1087.500000, 2175.000000, X, Y) && !ellipse(27157.878000, 27038.004000, 680.987220, 390.078411, 90.000000, X, Y) && !ellipse(28637.404000, 26328.090000, 1774.320051, 1774.320051, 0.000000, X, Y) && !ellipse(25941.315800, 29997.095200, 395.018411, 357.134410, 1.839260, X, Y) && !ellipse(24325.627260, 30492.315000, 451.476813, 379.500011, 179.081000, X, Y) && !ellipse(23384.421800, 29007.694400, 388.784011, 388.784011, 0.000000, X, Y) && !ellipse(26683.055600, 29227.707800, 327.848809, 327.848809, 0.000000, X, Y) && !ellipse(28459.780000, 25953.320000, 1663.920048, 1663.920048, 0.000000, X, Y) && !ellipse(27527.064960, 28478.260600, 721.204021, 288.750408, 354.398341, X, Y) && !ellipse(25964.899470, 27476.501600, 268.746408, 268.746408, 0.000000, X, Y) && !ellipse(26704.100891, 28590.140778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26464.211029, 28062.623627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28556.060000, 29177.218000, 1260.168036, 1260.168036, 0.000000, X, Y)
[Mon Feb 27 14:51:06 2012] Writing fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src34.gif
[Mon Feb 27 15:30:03 2012] Mean detx,y = (3678.23, 1266.26) 
[Mon Feb 27 15:30:06 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 15:30:23 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 15:30:23 2012] Setting source spectrum file to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Mon Feb 27 15:30:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Mon Feb 27 21:25:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 27 21:25:33 2012] rmf not generated due to insufficient counts
[Mon Feb 27 22:00:53 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:53 2012] Error reading totcts from fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Mon Feb 27 22:00:57 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:57 2012] Using photon index=1.80, rate=0.0115, arf fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src34.arf
[Mon Feb 27 22:00:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:57 2012] Updating source flux to 1.3e-13
[Mon Feb 27 22:10:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting