[Sat Feb 25 10:17:19 2012] Detection parameters:
  Position = (386.6, 278.0) = 0 42 18.64 41 14 1.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1004.8 +/- 38.3
  Background counts = 25.5
  Rate = 0.06 +/- 0.002

[Sat Feb 25 10:17:27 2012] Off-axis axis estimate = 6.56'
[Sun Feb 26 00:05:36 2012] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 00:05:36 2012] Initial guess for spatial extent in simple fitting = 9.71"
[Sun Feb 26 00:05:36 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.005
[Sun Feb 26 00:05:36 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 9.71"
[Sun Feb 26 05:57:23 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src15.ximg exists
[Sun Feb 26 05:57:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src15.csv
[Sun Feb 26 05:57:23 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Feb 26 05:57:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src15.csv
[Sun Feb 26 05:57:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 05:57:26 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Feb 26 05:57:26 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Feb 26 05:57:26 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Feb 26 05:58:56 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 12.951398 pixels away
[Sun Feb 26 05:58:56 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:56 2012] Assessing source extent using major
[Sun Feb 26 05:58:56 2012] Source does appear to be extended
[Sun Feb 26 05:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 19:06:09 2012] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 19:06:09 2012] Initial guess for spatial extent in simple fitting = 9.71"
[Sun Feb 26 19:06:09 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.005
[Sun Feb 26 19:06:09 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 9.71"
[Mon Feb 27 00:35:20 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src15.ximg exists
[Mon Feb 27 00:35:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src15.csv
[Mon Feb 27 00:35:20 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon Feb 27 00:35:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src15.csv
[Mon Feb 27 00:35:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 00:35:22 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon Feb 27 00:35:22 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Feb 27 00:35:22 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Mon Feb 27 00:36:41 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 26.902065 pixels away
[Mon Feb 27 00:36:41 2012] Spatial fit model total counts = 1252.910000, observed total counts = 1248.000000
[Mon Feb 27 00:36:41 2012] Offset between fit and detection position for source 21 = 0.088933 pixels
[Mon Feb 27 00:36:41 2012] 1227.642000 total counts/ 583.401000 bgd. counts: snr = 26.672565
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.088933 pixels
  Position = (386.5, 278.0) = 0 42 18.68 41 14 1.3
  Extent = 4.2 (4.0-4.5)", rotation angle = 0
  Source counts = 644.2 +/- 35.0
  Background counts = 583.4
  Rate = 0.03 +/- 0.002
[Mon Feb 27 00:36:41 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:36:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:36:41 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 00:36:41 2012] Source does appear to be extended
[Mon Feb 27 00:36:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 14:51:05 2012] XMMSAS src. selection expression = ellipse(33574.732800, 24140.561200, 252.864607, 252.864607, 0.000000, X, Y)
[Mon Feb 27 14:51:05 2012] Writing source region out to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src21_src.reg
[Mon Feb 27 14:51:05 2012] Extracting stamp from image fullrun_mos2_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (372, 264) - (401, 293)
[Mon Feb 27 14:51:05 2012] XMMSAS bgd. selection expression = annulus(33574.732800, 24140.561200, 421.441012, 842.882024, X, Y) && !ellipse(32735.292240, 23577.262200, 313.737609, 313.737609, 0.000000, X, Y) && !ellipse(32559.047960, 24258.085200, 251.764007, 251.764007, 0.000000, X, Y) && !ellipse(31457.614000, 23351.544000, 1467.288042, 1467.288042, 0.000000, X, Y)
[Mon Feb 27 14:51:05 2012] Writing fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src21.gif
[Mon Feb 27 15:01:54 2012] Mean detx,y = (-6161.63, 1141.97) 
[Mon Feb 27 15:01:56 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 15:02:17 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 15:02:17 2012] Setting source spectrum file to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon Feb 27 15:02:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Mon Feb 27 22:00:51 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:51 2012] Error reading totcts from fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon Feb 27 22:00:55 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:55 2012] Using photon index=1.80, rate=0.03, arf fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src21.arf
[Mon Feb 27 22:00:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:55 2012] Updating source flux to 5.5e-13