[Sat Feb 25 10:17:17 2012] Detection parameters:
  Position = (183.1, 288.0) = 0 43 37.12 41 14 44.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 759.1 +/- 33.1
  Background counts = 14.9
  Rate = 0.04 +/- 0.002

[Sat Feb 25 10:17:27 2012] Off-axis axis estimate = 8.40'
[Sun Feb 26 00:05:36 2012] Using EEF radius (= 10.63 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 00:05:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 26 00:05:36 2012] Initial guess for spatial extent in simple fitting = 10.63"
[Sun Feb 26 00:05:36 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.039
[Sun Feb 26 00:05:36 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 10.63"
[Sun Feb 26 05:57:23 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src23.ximg exists
[Sun Feb 26 05:57:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src23.csv
[Sun Feb 26 05:57:23 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun Feb 26 05:57:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src23.csv
[Sun Feb 26 05:57:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 05:57:26 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun Feb 26 05:57:26 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Feb 26 05:57:26 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sun Feb 26 05:58:56 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 13.166118 pixels away
[Sun Feb 26 05:58:56 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:56 2012] Assessing source extent using major
[Sun Feb 26 05:58:56 2012] Source does appear to be extended
[Sun Feb 26 05:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 19:06:09 2012] Using EEF radius (= 10.63 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 19:06:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 26 19:06:09 2012] Initial guess for spatial extent in simple fitting = 10.63"
[Sun Feb 26 19:06:09 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.039
[Sun Feb 26 19:06:09 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 10.63"
[Mon Feb 27 00:35:20 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src23.ximg exists
[Mon Feb 27 00:35:20 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src23_1.ximg exists
[Mon Feb 27 00:35:20 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_src23 appears to have run properly
[Mon Feb 27 00:35:22 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Mon Feb 27 00:35:22 2012] fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Mon Feb 27 00:35:22 2012] Fit fullrun_mos2_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Mon Feb 27 00:36:41 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 14.519361 pixels away
[Mon Feb 27 00:36:41 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:36:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:36:41 2012] Assessing source extent using major
[Mon Feb 27 00:36:41 2012] Source does appear to be extended
[Mon Feb 27 00:36:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 14:51:05 2012] XMMSAS src. selection expression = ellipse(15879.134918, 25004.481232, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 14:51:05 2012] Writing source region out to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src12_src.reg
[Mon Feb 27 14:51:05 2012] Extracting stamp from image fullrun_mos2_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (146, 250) - (221, 325)
[Mon Feb 27 14:51:05 2012] XMMSAS bgd. selection expression = annulus(15879.134918, 25004.481232, 1087.500000, 2175.000000, X, Y) && !ellipse(16530.489273, 23369.033630, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 14:51:05 2012] Writing fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src12.gif
[Mon Feb 27 15:05:53 2012] Mean detx,y = (9025.16, -7944.03) 
[Mon Feb 27 15:05:56 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 15:06:18 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 15:06:19 2012] Setting source spectrum file to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Feb 27 15:06:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Mon Feb 27 18:06:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 27 18:06:19 2012] rmf not generated due to insufficient counts
[Mon Feb 27 22:00:52 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:52 2012] Error reading totcts from fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Feb 27 22:00:56 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:56 2012] Using photon index=1.80, rate=0.0353, arf fullrun_mos2_xmm0505720501_pi300-10000_pass1_cl_src12.arf
[Mon Feb 27 22:00:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:56 2012] Updating source flux to 7.4e-13
[Mon Feb 27 22:10:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting