[Sat Feb 25 10:17:14 2012] Detection parameters:
  Position = (317.2, 279.2) = 0 42 45.40 41 14 7.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.9 +/- 14.9
  Background counts = 53.0
  Rate = 0.004 +/- 0.0007

[Sat Feb 25 10:17:14 2012] Off-axis axis estimate = 1.95'
[Sat Feb 25 19:05:30 2012] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 19:05:30 2012] Initial guess for spatial extent in simple fitting = 7.40"
[Sat Feb 25 19:05:30 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.825
[Sat Feb 25 19:05:30 2012] Giving source the simple spatial ID 72 for pass 0, mean size = 7.40"
[Sun Feb 26 00:05:33 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src72.ximg exists
[Sun Feb 26 00:05:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src72.csv
[Sun Feb 26 00:05:33 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src72_1.ximg exists
[Sun Feb 26 00:05:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src72.csv
[Sun Feb 26 00:05:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 00:05:36 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Sun Feb 26 00:05:36 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Sun Feb 26 00:05:36 2012] Fit fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src72 appears to have run properly
[Sun Feb 26 05:58:27 2012] Source 81 is offset by 6.997654 and 6.007816 pixels which is larger than
2 X fitted extent = 0.850855 x 0.850855, not incorporating fit results
[Sun Feb 26 05:58:27 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:27 2012] Assessing source extent using major
[Sun Feb 26 05:58:27 2012] Source does appear to be extended
[Sun Feb 26 05:58:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 13:33:49 2012] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 13:33:49 2012] Initial guess for spatial extent in simple fitting = 7.40"
[Sun Feb 26 13:33:49 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.825
[Sun Feb 26 13:33:49 2012] Giving source the simple spatial ID 69 for pass 1, mean size = 7.40"
[Sun Feb 26 19:06:07 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src69.ximg exists
[Sun Feb 26 19:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src69.csv
[Sun Feb 26 19:06:07 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src69_1.ximg exists
[Sun Feb 26 19:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src69.csv
[Sun Feb 26 19:06:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 19:06:09 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Sun Feb 26 19:06:09 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Sun Feb 26 19:06:09 2012] Fit fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src69 appears to have run properly
[Mon Feb 27 00:36:19 2012] Source 81 is offset by 6.997654 and 6.007816 pixels which is larger than
2 X fitted extent = 0.855821 x 0.855821, not incorporating fit results
[Mon Feb 27 00:36:19 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:36:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:36:19 2012] Assessing source extent using major
[Mon Feb 27 00:36:19 2012] Source does appear to be extended
[Mon Feb 27 00:36:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 09:50:57 2012] XMMSAS src. selection expression = ellipse(27547.101898, 24241.986023, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 09:50:57 2012] Writing source region out to fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src81_src.reg
[Mon Feb 27 09:50:57 2012] Extracting stamp from image fullrun_mos1_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (280, 242) - (355, 317)
[Mon Feb 27 09:50:57 2012] XMMSAS bgd. selection expression = annulus(27547.101898, 24241.986023, 1087.500000, 2175.000000, X, Y) && !ellipse(29071.519600, 26568.053200, 407.280812, 407.280812, 0.000000, X, Y) && !ellipse(26861.642600, 25758.050800, 490.318414, 490.318414, 0.000000, X, Y) && !ellipse(27761.041800, 26933.100360, 943.536027, 615.789618, 119.638400, X, Y) && !ellipse(29527.352560, 23901.458000, 378.714411, 378.714411, 0.000000, X, Y) && !ellipse(25384.372400, 26562.221880, 335.331210, 317.614409, 114.091600, X, Y) && !ellipse(25936.746979, 26117.904938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28100.210000, 26309.132000, 1012.120029, 479.884814, 90.000000, X, Y) && !ellipse(26722.425903, 26484.819366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28257.700600, 24970.488200, 550.612016, 388.000011, 57.510855, X, Y) && !ellipse(28848.254761, 24661.738190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27574.377014, 25802.099823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30127.405396, 26786.491760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28629.717400, 23441.197600, 325.215209, 325.215209, 0.000000, X, Y) && !ellipse(24685.006866, 25892.678802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29416.101807, 24574.788635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28510.848000, 27587.816000, 1277.368037, 1277.368037, 0.000000, X, Y)
[Mon Feb 27 09:50:57 2012] Writing fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src81.gif
[Mon Feb 27 10:43:27 2012] Mean detx,y = (-1836.07, 908.48) 
[Mon Feb 27 10:43:29 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 10:43:49 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 10:43:50 2012] Setting source spectrum file to fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Mon Feb 27 10:43:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src81_bgd.pi.gz
[Mon Feb 27 14:34:31 2012] Not generating rmf since there are only 72 counts
[Mon Feb 27 14:34:31 2012] rmf not generated due to insufficient counts
[Mon Feb 27 22:00:44 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:44 2012] Error reading totcts from fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Mon Feb 27 22:00:50 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:50 2012] Using photon index=1.80, rate=0.00358, arf fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src81.arf
[Mon Feb 27 22:00:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:50 2012] Updating source flux to 3.7e-14
[Mon Feb 27 22:01:03 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting