[Sat Feb 25 10:17:13 2012] Detection parameters:
  Position = (332.7, 324.2) = 0 42 39.39 41 17 23.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.2 +/- 13.6
  Background counts = 42.1
  Rate = 0.003 +/- 0.0007

[Sat Feb 25 10:17:14 2012] Off-axis axis estimate = 3.11'
[Sat Feb 25 19:05:30 2012] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 19:05:30 2012] Initial guess for spatial extent in simple fitting = 7.98"
[Sat Feb 25 19:05:30 2012] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.871
[Sat Feb 25 19:05:30 2012] Giving source the simple spatial ID 82 for pass 0, mean size = 7.98"
[Sun Feb 26 00:05:34 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src82.ximg exists
[Sun Feb 26 00:05:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src82.csv
[Sun Feb 26 00:05:34 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src82_1.ximg exists
[Sun Feb 26 00:05:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src82.csv
[Sun Feb 26 00:05:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 00:05:36 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src82.ximg exists
[Sun Feb 26 00:05:36 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src82_1.ximg exists
[Sun Feb 26 00:05:36 2012] Fit fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src82 appears to have run properly
[Sun Feb 26 05:58:27 2012] Spatial fit model total counts = 913.447000, observed total counts = 912.000000
[Sun Feb 26 05:58:27 2012] Offset between fit and detection position for source 74 = 7.916161 pixels
[Sun Feb 26 05:58:27 2012] 899.689000 total counts/ 765.785000 bgd. counts: snr = 4.838827
Spatial fit parameters:
  Offset between fit and detection position for source 74 = 7.916161 pixels
  Position = (328.3, 317.7) = 0 42 41.12 41 16 54.0
  Extent = 16.0 (15.9-31.9)", rotation angle = 0
  Source counts = 133.9 +/- 30.0
  Background counts = 765.8
  Rate = 0.006 +/- 0.001
[Sun Feb 26 05:58:27 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:27 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 05:58:27 2012] Source does appear to be extended
[Sun Feb 26 05:58:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 13:33:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 13:33:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 26 13:33:49 2012] Initial guess for spatial extent in simple fitting = 15.97"
[Sun Feb 26 13:33:49 2012] source mask rpix=3.7, npix_max = 69, mask sum = 71, frac = 1.020
[Sun Feb 26 13:33:49 2012] Giving source the simple spatial ID 73 for pass 1, mean size = 15.97"
[Sun Feb 26 19:06:07 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src73.ximg exists
[Sun Feb 26 19:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src73.csv
[Sun Feb 26 19:06:07 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src73_1.ximg exists
[Sun Feb 26 19:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src73.csv
[Sun Feb 26 19:06:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 19:06:09 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Sun Feb 26 19:06:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src73.csv
[Sun Feb 26 19:06:09 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Sun Feb 26 19:06:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src73.csv
[Sun Feb 26 19:06:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 00:36:19 2012] Source 74 is offset by 0.306736 and -2.302828 pixels which is larger than
2 X fitted extent = 1.120207 x 1.120207, not incorporating fit results
[Mon Feb 27 00:36:19 2012] Source 74 is offset by -6.225080 and 5.006368 pixels which is larger than
2 X fitted extent = 7.347540 x 2.241412, not incorporating fit results
[Mon Feb 27 00:36:19 2012] Source 74 is offset by 6.939034 and 4.981172 pixels which is larger than
2 X fitted extent = 2.214566 x 2.214566, not incorporating fit results
[Mon Feb 27 00:36:19 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:36:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:36:19 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 00:36:19 2012] Source does appear to be extended
[Mon Feb 27 00:36:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 09:50:57 2012] XMMSAS src. selection expression = ellipse(28510.848000, 27587.816000, 958.026028, 958.026028, 0.000000, X, Y)
[Mon Feb 27 09:50:57 2012] Writing source region out to fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src74_src.reg
[Mon Feb 27 09:50:57 2012] Extracting stamp from image fullrun_mos1_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (273, 263) - (383, 373)
[Mon Feb 27 09:50:57 2012] XMMSAS bgd. selection expression = annulus(28510.848000, 27587.816000, 1596.710046, 3193.420092, X, Y) && !ellipse(29071.519600, 26568.053200, 407.280812, 407.280812, 0.000000, X, Y) && !ellipse(26861.642600, 25758.050800, 490.318414, 490.318414, 0.000000, X, Y) && !ellipse(27761.041800, 26933.100360, 943.536027, 615.789618, 119.638400, X, Y) && !ellipse(27152.028000, 27007.092000, 511.920015, 511.920015, 0.000000, X, Y) && !ellipse(25384.372400, 26562.221880, 335.331210, 317.614409, 114.091600, X, Y) && !ellipse(25942.104000, 29994.945600, 354.878410, 354.878410, 0.000000, X, Y) && !ellipse(30753.404060, 26927.733400, 380.273611, 336.019210, 54.657700, X, Y) && !ellipse(25936.746979, 26117.904938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28100.210000, 26309.132000, 1012.120029, 479.884814, 90.000000, X, Y) && !ellipse(26722.425903, 26484.819366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26660.014682, 29198.853600, 336.554410, 248.950407, 47.108000, X, Y) && !ellipse(30727.091800, 30868.760600, 434.431213, 316.678409, 33.280122, X, Y) && !ellipse(28257.700600, 24970.488200, 550.612016, 388.000011, 57.510855, X, Y) && !ellipse(28712.345200, 29787.785200, 393.233611, 393.233611, 0.000000, X, Y) && !ellipse(31896.664180, 30402.064200, 372.392811, 372.392811, 0.000000, X, Y) && !ellipse(28848.254761, 24661.738190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27574.377014, 25802.099823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30127.405396, 26786.491760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27626.183000, 28483.610200, 334.445610, 334.445610, 0.000000, X, Y) && !ellipse(25950.000820, 27490.564400, 393.644011, 221.675206, 69.615000, X, Y) && !ellipse(25308.652008, 29614.514801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32109.485657, 23696.908508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24685.006866, 25892.678802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27260.164000, 28054.836000, 1214.640035, 1214.640035, 0.000000, X, Y) && !ellipse(29416.101807, 24574.788635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29517.526581, 27696.322510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27547.101898, 24241.986023, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 09:50:57 2012] Writing fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src74.gif
[Mon Feb 27 10:45:20 2012] Mean detx,y = (1066.07, -56.24) 
[Mon Feb 27 10:45:23 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 10:45:48 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 10:45:49 2012] Setting source spectrum file to fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Mon Feb 27 10:45:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src74_bgd.pi.gz
[Mon Feb 27 22:00:44 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:44 2012] Error reading totcts from fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Mon Feb 27 22:00:50 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:50 2012] Using photon index=1.80, rate=0.00624, arf fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src74.arf
[Mon Feb 27 22:00:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:50 2012] Updating source flux to 6e-14
[Mon Feb 27 22:01:03 2012] Flag b found in src. 74 procflags, skipping spectral fitting