[Sat Feb 25 10:17:13 2012] Detection parameters:
  Position = (224.6, 330.1) = 0 43 21.13 41 17 48.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.1 +/- 13.8
  Background counts = 21.6
  Rate = 0.008 +/- 0.001

[Sat Feb 25 10:17:14 2012] Off-axis axis estimate = 5.83'
[Sat Feb 25 19:05:30 2012] Using EEF radius (= 9.34 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 19:05:30 2012] Initial guess for spatial extent in simple fitting = 9.34"
[Sat Feb 25 19:05:30 2012] source mask rpix=2.1, npix_max = 28, mask sum = 30, frac = 1.070
[Sat Feb 25 19:05:30 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 9.34"
[Sun Feb 26 00:05:33 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src61.ximg exists
[Sun Feb 26 00:05:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src61.csv
[Sun Feb 26 00:05:33 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src61_1.ximg exists
[Sun Feb 26 00:05:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src61.csv
[Sun Feb 26 00:05:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 00:05:35 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Sun Feb 26 00:05:35 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Sun Feb 26 00:05:35 2012] Fit fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Sun Feb 26 05:58:27 2012] Warning: source 61 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 70 at 13.038069 pixels away
[Sun Feb 26 05:58:27 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:27 2012] Assessing source extent using major
[Sun Feb 26 05:58:27 2012] Source does appear to be extended
[Sun Feb 26 05:58:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 13:33:49 2012] Using EEF radius (= 9.34 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 13:33:49 2012] Initial guess for spatial extent in simple fitting = 9.34"
[Sun Feb 26 13:33:49 2012] source mask rpix=2.1, npix_max = 28, mask sum = 30, frac = 1.070
[Sun Feb 26 13:33:49 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 9.34"
[Sun Feb 26 19:06:07 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src61.ximg exists
[Sun Feb 26 19:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src61.csv
[Sun Feb 26 19:06:07 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src61_1.ximg exists
[Sun Feb 26 19:06:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src61.csv
[Sun Feb 26 19:06:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 19:06:09 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Sun Feb 26 19:06:09 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Sun Feb 26 19:06:09 2012] Fit fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Mon Feb 27 00:36:19 2012] Source 70 is offset by -5.668542 and 7.725677 pixels which is larger than
2 X fitted extent = 1.073687 x 1.073687, not incorporating fit results
[Mon Feb 27 00:36:19 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:36:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:36:19 2012] Assessing source extent using major
[Mon Feb 27 00:36:19 2012] Source does appear to be extended
[Mon Feb 27 00:36:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 09:50:56 2012] XMMSAS src. selection expression = ellipse(19492.548813, 28673.391876, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 09:50:56 2012] Writing source region out to fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src70_src.reg
[Mon Feb 27 09:50:56 2012] Extracting stamp from image fullrun_mos1_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (187, 293) - (262, 368)
[Mon Feb 27 09:50:56 2012] XMMSAS bgd. selection expression = annulus(19492.548813, 28673.391876, 1087.500000, 2175.000000, X, Y) && !ellipse(17967.255722, 29459.155762, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 09:50:56 2012] Writing fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src70.gif
[Mon Feb 27 10:38:48 2012] Mean detx,y = (-2654.05, -8205.63) 
[Mon Feb 27 10:38:51 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 10:39:37 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 10:39:37 2012] Setting source spectrum file to fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Mon Feb 27 10:39:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Mon Feb 27 14:32:56 2012] Not generating rmf since there are only 97 counts
[Mon Feb 27 14:32:56 2012] rmf not generated due to insufficient counts
[Mon Feb 27 22:00:44 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:44 2012] Error reading totcts from fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Mon Feb 27 22:00:49 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:49 2012] Using photon index=1.80, rate=0.00752, arf fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src70.arf
[Mon Feb 27 22:00:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:49 2012] Updating source flux to 1.2e-13
[Mon Feb 27 22:01:03 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting