[Sat Feb 25 10:17:07 2012] Detection parameters:
  Position = (312.7, 310.9) = 0 42 47.12 41 16 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2136.1 +/- 59.7
  Background counts = 51.3
  Rate = 0.1 +/- 0.003

[Sat Feb 25 10:17:14 2012] Off-axis axis estimate = 1.38'
[Sat Feb 25 19:05:30 2012] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 19:05:30 2012] Initial guess for spatial extent in simple fitting = 7.12"
[Sat Feb 25 19:05:30 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.877
[Sat Feb 25 19:05:30 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.12"
[Sun Feb 26 00:05:32 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src6.ximg exists
[Sun Feb 26 00:05:32 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Feb 26 00:05:32 2012] Fit fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src6 appears to have run properly
[Sun Feb 26 00:05:34 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Feb 26 00:05:34 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Feb 26 00:05:34 2012] Fit fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Feb 26 05:58:26 2012] Source 7 is offset by -5.337024 and 1.059092 pixels which is larger than
2 X fitted extent = 1.742998 x 1.742998, not incorporating fit results
[Sun Feb 26 05:58:27 2012] Spatial fit model total counts = 5195.560000, observed total counts = 5192.000000
[Sun Feb 26 05:58:27 2012] Offset between fit and detection position for source 7 = 0.093368 pixels
[Sun Feb 26 05:58:27 2012] Warning, changing simple spatial fit ID from 6 to 26
[Sun Feb 26 05:58:27 2012] 5113.840000 total counts/ 4090.890000 bgd. counts: snr = 15.993573
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.093368 pixels
  Position = (312.6, 311.0) = 0 42 47.15 41 16 25.0
  Extent = 6.3 (5.9-7.1)", rotation angle = 0
  Source counts = 1023.0 +/- 71.5
  Background counts = 4090.9
  Rate = 0.05 +/- 0.003
[Sun Feb 26 05:58:27 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:27 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 05:58:27 2012] Source does appear to be extended
[Sun Feb 26 05:58:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 05:58:27 2012] Source is confused with source 5
[Sun Feb 26 13:33:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 13:33:49 2012] Initial guess for spatial extent in simple fitting = 6.31"
[Sun Feb 26 13:33:49 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.051
[Sun Feb 26 13:33:49 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 6.31"
[Sun Feb 26 19:06:06 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src6.ximg exists
[Sun Feb 26 19:06:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src6.csv
[Sun Feb 26 19:06:06 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Feb 26 19:06:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src6.csv
[Sun Feb 26 19:06:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 19:06:08 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Feb 26 19:06:08 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Feb 26 19:06:08 2012] Fit fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Mon Feb 27 00:36:19 2012] Warning, spatial fit 6 centroid is now closest to src. 41
[Mon Feb 27 00:36:19 2012] Spatial fit model total counts = 5191.780000, observed total counts = 5192.000000
[Mon Feb 27 00:36:19 2012] Offset between fit and detection position for source 7 = 0.010598 pixels
[Mon Feb 27 00:36:19 2012] Warning, changing simple spatial fit ID from 6 to 26
[Mon Feb 27 00:36:19 2012] 5102.820000 total counts/ 4069.060000 bgd. counts: snr = 16.205882
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.010598 pixels
  Position = (312.6, 311.0) = 0 42 47.15 41 16 25.0
  Extent = 6.4 (5.9-7.0)", rotation angle = 0
  Source counts = 1033.8 +/- 71.4
  Background counts = 4069.1
  Rate = 0.05 +/- 0.003
[Mon Feb 27 00:36:19 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:36:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:36:19 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 00:36:19 2012] Source does appear to be extended
[Mon Feb 27 00:36:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 09:50:54 2012] Counts = 1033.760000, rescaling region sizes by 2.000000
[Mon Feb 27 09:50:54 2012] XMMSAS src. selection expression = ellipse(27152.028000, 27007.092000, 767.880022, 767.880022, 0.000000, X, Y)
[Mon Feb 27 09:50:54 2012] Writing source region out to fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src7_src.reg
[Mon Feb 27 09:50:54 2012] Extracting stamp from image fullrun_mos1_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (269, 267) - (357, 355)
[Mon Feb 27 09:50:54 2012] XMMSAS bgd. selection expression = annulus(27152.028000, 27007.092000, 2559.600074, 5119.200147, X, Y) && !ellipse(29071.519600, 26568.053200, 407.280812, 407.280812, 0.000000, X, Y) && !ellipse(21854.362200, 25130.414400, 422.764812, 422.764812, 0.000000, X, Y) && !ellipse(26861.642600, 25758.050800, 490.318414, 490.318414, 0.000000, X, Y) && !ellipse(27761.041800, 26933.100360, 943.536027, 615.789618, 119.638400, X, Y) && !ellipse(29527.352560, 23901.458000, 378.714411, 378.714411, 0.000000, X, Y) && !ellipse(25384.372400, 26562.221880, 335.331210, 317.614409, 114.091600, X, Y) && !ellipse(25942.104000, 29994.945600, 354.878410, 354.878410, 0.000000, X, Y) && !ellipse(23556.836048, 25788.064760, 518.775336, 413.817836, 64.381895, X, Y) && !ellipse(30753.404060, 26927.733400, 380.273611, 336.019210, 54.657700, X, Y) && !ellipse(31394.786285, 22109.458527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32602.749649, 25986.373235, 374.579335, 334.603186, 98.758847, X, Y) && !ellipse(30530.380000, 23180.681000, 399.973612, 342.898410, 14.625300, X, Y) && !ellipse(25936.746979, 26117.904938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28100.210000, 26309.132000, 1012.120029, 479.884814, 90.000000, X, Y) && !ellipse(23380.509800, 28991.553800, 411.456812, 411.456812, 0.000000, X, Y) && !ellipse(24338.135254, 30478.798523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24275.775000, 26614.305400, 367.475211, 367.475211, 0.000000, X, Y) && !ellipse(26722.425903, 26484.819366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26660.014682, 29198.853600, 336.554410, 248.950407, 47.108000, X, Y) && !ellipse(30727.091800, 30868.760600, 434.431213, 316.678409, 33.280122, X, Y) && !ellipse(28257.700600, 24970.488200, 550.612016, 388.000011, 57.510855, X, Y) && !ellipse(28712.345200, 29787.785200, 393.233611, 393.233611, 0.000000, X, Y) && !ellipse(29834.648000, 31405.642200, 400.588812, 400.588812, 0.000000, X, Y) && !ellipse(31896.664180, 30402.064200, 372.392811, 372.392811, 0.000000, X, Y) && !ellipse(28848.254761, 24661.738190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27574.377014, 25802.099823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30127.405396, 26786.491760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32543.146200, 24245.527600, 290.960808, 290.960808, 0.000000, X, Y) && !ellipse(27626.183000, 28483.610200, 334.445610, 334.445610, 0.000000, X, Y) && !ellipse(25950.000820, 27490.564400, 393.644011, 221.675206, 69.615000, X, Y) && !ellipse(28629.717400, 23441.197600, 325.215209, 325.215209, 0.000000, X, Y) && !ellipse(25308.652008, 29614.514801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22315.262800, 22676.153600, 379.571417, 379.571417, 0.000000, X, Y) && !ellipse(32109.485657, 23696.908508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24685.006866, 25892.678802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28365.793457, 32595.671967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27260.164000, 28054.836000, 1214.640035, 1214.640035, 0.000000, X, Y) && !ellipse(29416.101807, 24574.788635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29517.526581, 27696.322510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27547.101898, 24241.986023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28510.848000, 27587.816000, 1277.368037, 1277.368037, 0.000000, X, Y)
[Mon Feb 27 09:50:54 2012] Writing fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src7.gif
[Mon Feb 27 09:59:38 2012] Mean detx,y = (172.48, -770.61) 
[Mon Feb 27 09:59:41 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 10:00:21 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 10:00:22 2012] Setting source spectrum file to fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Feb 27 10:00:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon Feb 27 22:00:39 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:39 2012] Error reading totcts from fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Feb 27 22:00:44 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:44 2012] Using photon index=1.80, rate=0.0482, arf fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src7.arf
[Mon Feb 27 22:00:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:44 2012] Updating source flux to 4.9e-13
[Mon Feb 27 22:01:03 2012] Flag b found in src. 7 procflags, skipping spectral fitting
[Mon Feb 27 22:01:03 2012] Flag c found in src. 7 procflags, skipping spectral fitting