[Sat Feb 25 10:17:10 2012] Detection parameters:
  Position = (324.3, 303.1) = 0 42 42.66 41 15 49.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1296.4 +/- 48.3
  Background counts = 54.3
  Rate = 0.06 +/- 0.002

[Sat Feb 25 10:17:14 2012] Off-axis axis estimate = 1.90'
[Sat Feb 25 19:05:30 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 19:05:30 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Sat Feb 25 19:05:30 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.829
[Sat Feb 25 19:05:30 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 7.38"
[Sun Feb 26 00:05:32 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src16.ximg exists
[Sun Feb 26 00:05:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src16.csv
[Sun Feb 26 00:05:32 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src16_1.ximg exists
[Sun Feb 26 00:05:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src16.csv
[Sun Feb 26 00:05:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 00:05:34 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sun Feb 26 00:05:34 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Feb 26 00:05:34 2012] Fit fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Sun Feb 26 05:58:27 2012] Spatial fit model total counts = 5928.720000, observed total counts = 5928.000000
[Sun Feb 26 05:58:27 2012] Offset between fit and detection position for source 44 = 3.754120 pixels
[Sun Feb 26 05:58:27 2012] 4898.310000 total counts/ 3048.560000 bgd. counts: snr = 33.501609
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 3.754120 pixels
  Position = (321.7, 305.8) = 0 42 43.67 41 16 2.2
  Extent = 14.5 (13.8-14.8)", rotation angle = 0
  Source counts = 1849.8 +/- 70.0
  Background counts = 3048.6
  Rate = 0.09 +/- 0.003
[Sun Feb 26 05:58:27 2012] Spatial fit model total counts = 4800.920000, observed total counts = 4799.000000
[Sun Feb 26 05:58:27 2012] Offset between fit and detection position for source 44 = 3.381531 pixels
[Sun Feb 26 05:58:27 2012] Warning, changing simple spatial fit ID from 16 to 48
[Sun Feb 26 05:58:27 2012] 3801.125000 total counts/ 3243.130000 bgd. counts: snr = 9.798241
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 3.381531 pixels
  Position = (323.5, 303.0) = 0 42 42.94 41 15 50.1
  Extent = 12.7 (12.6-12.7)" x 6.0 (4.9-7.1)", rotation angle = 90
  Source counts = 558.0 +/- 61.7
  Background counts = 3243.1
  Rate = 0.03 +/- 0.003
[Sun Feb 26 05:58:27 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:27 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 05:58:27 2012] Source does appear to be extended
[Sun Feb 26 05:58:27 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.78
[Sun Feb 26 05:58:27 2012] Source is asymmetric
[Sun Feb 26 05:58:27 2012] Source is confused with source 5
[Sun Feb 26 13:33:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 13:33:49 2012] Initial guess for spatial extent in simple fitting = 9.33"
[Sun Feb 26 13:33:49 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.073
[Sun Feb 26 13:33:49 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 9.33"
[Sun Feb 26 19:06:06 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src16.ximg exists
[Sun Feb 26 19:06:06 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src16_1.ximg exists
[Sun Feb 26 19:06:06 2012] Fit fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src16 appears to have run properly
[Sun Feb 26 19:06:08 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sun Feb 26 19:06:08 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sun Feb 26 19:06:08 2012] Fit fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Mon Feb 27 00:36:19 2012] Source 44 is offset by 2.278253 and -3.112487 pixels which is larger than
2 X fitted extent = 8.574759 x 3.044887, not incorporating fit results
[Mon Feb 27 00:36:19 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:36:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:36:19 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 00:36:19 2012] Source does appear to be extended
[Mon Feb 27 00:36:19 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.78
[Mon Feb 27 00:36:19 2012] Source is asymmetric
[Mon Feb 27 09:50:54 2012] XMMSAS src. selection expression = ellipse(28100.210000, 26309.132000, 759.090022, 359.913610, 90.000000, X, Y)
[Mon Feb 27 09:50:54 2012] Writing source region out to fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src44_src.reg
[Mon Feb 27 09:50:54 2012] Extracting stamp from image fullrun_mos1_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (280, 259) - (367, 347)
[Mon Feb 27 09:50:54 2012] XMMSAS bgd. selection expression = annulus(28100.210000, 26309.132000, 1265.150036, 2530.300073, X, Y) && !ellipse(29071.519600, 26568.053200, 407.280812, 407.280812, 0.000000, X, Y) && !ellipse(26861.642600, 25758.050800, 490.318414, 490.318414, 0.000000, X, Y) && !ellipse(27761.041800, 26933.100360, 943.536027, 615.789618, 119.638400, X, Y) && !ellipse(29527.352560, 23901.458000, 378.714411, 378.714411, 0.000000, X, Y) && !ellipse(27152.028000, 27007.092000, 511.920015, 511.920015, 0.000000, X, Y) && !ellipse(25384.372400, 26562.221880, 335.331210, 317.614409, 114.091600, X, Y) && !ellipse(30753.404060, 26927.733400, 380.273611, 336.019210, 54.657700, X, Y) && !ellipse(25936.746979, 26117.904938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26722.425903, 26484.819366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28257.700600, 24970.488200, 550.612016, 388.000011, 57.510855, X, Y) && !ellipse(28848.254761, 24661.738190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27574.377014, 25802.099823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30127.405396, 26786.491760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27626.183000, 28483.610200, 334.445610, 334.445610, 0.000000, X, Y) && !ellipse(25950.000820, 27490.564400, 393.644011, 221.675206, 69.615000, X, Y) && !ellipse(25308.652008, 29614.514801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27260.164000, 28054.836000, 1214.640035, 1214.640035, 0.000000, X, Y) && !ellipse(29416.101807, 24574.788635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29517.526581, 27696.322510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27547.101898, 24241.986023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28510.848000, 27587.816000, 1277.368037, 1277.368037, 0.000000, X, Y)
[Mon Feb 27 09:50:54 2012] Writing fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src44.gif
[Mon Feb 27 10:13:14 2012] Mean detx,y = (191.12, 169.17) 
[Mon Feb 27 10:13:17 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 10:13:34 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 10:13:34 2012] Setting source spectrum file to fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Mon Feb 27 10:13:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Mon Feb 27 22:00:40 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:40 2012] Error reading totcts from fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Mon Feb 27 22:00:45 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:45 2012] Using photon index=1.80, rate=0.026, arf fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src44.arf
[Mon Feb 27 22:00:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:45 2012] Updating source flux to 2.9e-13
[Mon Feb 27 22:01:03 2012] Flag b found in src. 44 procflags, skipping spectral fitting
[Mon Feb 27 22:01:03 2012] Flag c found in src. 44 procflags, skipping spectral fitting