[Sat Feb 25 10:17:08 2012] Detection parameters:
  Position = (371.1, 415.9) = 0 42 24.53 41 24 1.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 173.9 +/- 16.9
  Background counts = 16.4
  Rate = 0.02 +/- 0.001

[Sat Feb 25 10:17:14 2012] Off-axis axis estimate = 10.01'
[Sat Feb 25 19:05:30 2012] Using EEF radius (= 11.44 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 19:05:30 2012] Initial guess for spatial extent in simple fitting = 11.44"
[Sat Feb 25 19:05:30 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.919
[Sat Feb 25 19:05:30 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 11.44"
[Sun Feb 26 00:05:33 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src45.ximg exists
[Sun Feb 26 00:05:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src45.csv
[Sun Feb 26 00:05:33 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src45_1.ximg exists
[Sun Feb 26 00:05:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src45.csv
[Sun Feb 26 00:05:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 00:05:35 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Sun Feb 26 00:05:35 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Sun Feb 26 00:05:35 2012] Fit fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Sun Feb 26 05:58:27 2012] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 13.422716 pixels away
[Sun Feb 26 05:58:27 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:27 2012] Assessing source extent using major
[Sun Feb 26 05:58:27 2012] Source does appear to be extended
[Sun Feb 26 05:58:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 13:33:49 2012] Using EEF radius (= 11.44 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 13:33:49 2012] Initial guess for spatial extent in simple fitting = 11.44"
[Sun Feb 26 13:33:49 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.919
[Sun Feb 26 13:33:49 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 11.44"
[Sun Feb 26 19:06:07 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src45.ximg exists
[Sun Feb 26 19:06:07 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src45_1.ximg exists
[Sun Feb 26 19:06:07 2012] Fit fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src45 appears to have run properly
[Sun Feb 26 19:06:08 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Sun Feb 26 19:06:08 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Sun Feb 26 19:06:08 2012] Fit fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Mon Feb 27 00:36:19 2012] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 14.037892 pixels away
[Mon Feb 27 00:36:19 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:36:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:36:19 2012] Assessing source extent using major
[Mon Feb 27 00:36:19 2012] Source does appear to be extended
[Mon Feb 27 00:36:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 09:50:56 2012] XMMSAS src. selection expression = ellipse(32238.275818, 36135.590668, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 09:50:56 2012] Writing source region out to fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src20_src.reg
[Mon Feb 27 09:50:56 2012] Extracting stamp from image fullrun_mos1_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (334, 378) - (409, 453)
[Mon Feb 27 09:50:56 2012] XMMSAS bgd. selection expression = annulus(32238.275818, 36135.590668, 1087.500000, 2175.000000, X, Y) && !ellipse(31864.495483, 38321.412567, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 09:50:56 2012] Writing fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src20.gif
[Mon Feb 27 10:29:46 2012] Mean detx,y = (10588.15, -1717.70) 
[Mon Feb 27 10:29:48 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 10:30:07 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 10:30:07 2012] Setting source spectrum file to fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Feb 27 10:30:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Mon Feb 27 14:13:58 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 27 14:13:58 2012] rmf not generated due to insufficient counts
[Mon Feb 27 22:00:43 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:43 2012] Error reading totcts from fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Feb 27 22:00:48 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:48 2012] Using photon index=1.80, rate=0.0153, arf fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src20.arf
[Mon Feb 27 22:00:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:48 2012] Updating source flux to 2.7e-13
[Mon Feb 27 22:01:03 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting