[Sat Feb 25 10:17:07 2012] Detection parameters:
  Position = (298.8, 345.8) = 0 42 52.49 41 18 54.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1731.4 +/- 52.6
  Background counts = 32.3
  Rate = 0.1 +/- 0.003

[Sat Feb 25 10:17:14 2012] Off-axis axis estimate = 3.43'
[Sat Feb 25 19:05:30 2012] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 19:05:30 2012] Initial guess for spatial extent in simple fitting = 8.14"
[Sat Feb 25 19:05:30 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.711
[Sat Feb 25 19:05:30 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 8.14"
[Sun Feb 26 00:05:32 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src8.ximg exists
[Sun Feb 26 00:05:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src8.csv
[Sun Feb 26 00:05:32 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Feb 26 00:05:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src8.csv
[Sun Feb 26 00:05:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 00:05:34 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Feb 26 00:05:34 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Feb 26 00:05:34 2012] Fit fullrun_mos1_xmm0505720501_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sun Feb 26 05:58:26 2012] Spatial fit model total counts = 1890.870000, observed total counts = 1897.000000
[Sun Feb 26 05:58:26 2012] Offset between fit and detection position for source 12 = 0.453756 pixels
[Sun Feb 26 05:58:26 2012] 1847.445000 total counts/ 821.855000 bgd. counts: snr = 35.774715
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.453756 pixels
  Position = (298.7, 345.3) = 0 42 52.51 41 18 54.4
  Extent = 4.4 (4.1-4.6)", rotation angle = 0
  Source counts = 1025.6 +/- 43.0
  Background counts = 821.9
  Rate = 0.05 +/- 0.002
[Sun Feb 26 05:58:27 2012] Spatial fit model total counts = 1209.860000, observed total counts = 1207.000000
[Sun Feb 26 05:58:27 2012] Offset between fit and detection position for source 12 = 0.403320 pixels
[Sun Feb 26 05:58:27 2012] Warning, changing simple spatial fit ID from 8 to 56
[Sun Feb 26 05:58:27 2012] 1237.291000 total counts/ 838.551000 bgd. counts: snr = 13.769719
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.403320 pixels
  Position = (298.3, 345.4) = 0 42 52.66 41 18 54.7
  Extent = 4.1 (3.7-4.5)", rotation angle = 0
  Source counts = 398.7 +/- 35.2
  Background counts = 838.6
  Rate = 0.02 +/- 0.002
[Sun Feb 26 05:58:27 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 05:58:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 05:58:27 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 05:58:27 2012] Source does appear to be extended
[Sun Feb 26 05:58:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 13:33:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 13:33:49 2012] Initial guess for spatial extent in simple fitting = 4.08"
[Sun Feb 26 13:33:49 2012] source mask rpix=0.9, npix_max = 8, mask sum = 5, frac = 0.604
[Sun Feb 26 13:33:49 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 4.08"
[Sun Feb 26 19:06:06 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src8.ximg exists
[Sun Feb 26 19:06:06 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun Feb 26 19:06:06 2012] Fit fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_src8 appears to have run properly
[Sun Feb 26 19:06:08 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun Feb 26 19:06:08 2012] fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Feb 26 19:06:08 2012] Fit fullrun_mos1_xmm0505720501_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Mon Feb 27 00:36:19 2012] Spatial fit model total counts = 1928.380000, observed total counts = 1933.000000
[Mon Feb 27 00:36:19 2012] Offset between fit and detection position for source 12 = 0.400390 pixels
[Mon Feb 27 00:36:19 2012] 1897.529000 total counts/ 862.199000 bgd. counts: snr = 35.259410
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.400390 pixels
  Position = (298.7, 345.3) = 0 42 52.51 41 18 54.4
  Extent = 4.4 (4.2-4.7)", rotation angle = 0
  Source counts = 1035.3 +/- 43.6
  Background counts = 862.2
  Rate = 0.05 +/- 0.002
[Mon Feb 27 00:36:19 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 00:36:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 00:36:19 2012] Assessing source extent using major axis lower bound
[Mon Feb 27 00:36:19 2012] Source does appear to be extended
[Mon Feb 27 00:36:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 09:50:54 2012] Counts = 1035.330000, rescaling region sizes by 2.000000
[Mon Feb 27 09:50:54 2012] XMMSAS src. selection expression = ellipse(25942.104000, 29994.945600, 532.317615, 532.317615, 0.000000, X, Y)
[Mon Feb 27 09:50:54 2012] Writing source region out to fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src12_src.reg
[Mon Feb 27 09:50:54 2012] Extracting stamp from image fullrun_mos1_xmm0505720501_pi300-10000_cl_sm2.00.img.gz, (268, 315) - (329, 376)
[Mon Feb 27 09:50:54 2012] XMMSAS bgd. selection expression = annulus(25942.104000, 29994.945600, 1774.392051, 3548.784102, X, Y) && !ellipse(29071.519600, 26568.053200, 407.280812, 407.280812, 0.000000, X, Y) && !ellipse(27761.041800, 26933.100360, 943.536027, 615.789618, 119.638400, X, Y) && !ellipse(27152.028000, 27007.092000, 511.920015, 511.920015, 0.000000, X, Y) && !ellipse(25384.372400, 26562.221880, 335.331210, 317.614409, 114.091600, X, Y) && !ellipse(25936.746979, 26117.904938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28100.210000, 26309.132000, 1012.120029, 479.884814, 90.000000, X, Y) && !ellipse(23380.509800, 28991.553800, 411.456812, 411.456812, 0.000000, X, Y) && !ellipse(24338.135254, 30478.798523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24275.775000, 26614.305400, 367.475211, 367.475211, 0.000000, X, Y) && !ellipse(26722.425903, 26484.819366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26660.014682, 29198.853600, 336.554410, 248.950407, 47.108000, X, Y) && !ellipse(28712.345200, 29787.785200, 393.233611, 393.233611, 0.000000, X, Y) && !ellipse(29834.648000, 31405.642200, 400.588812, 400.588812, 0.000000, X, Y) && !ellipse(23512.795220, 32942.009200, 420.844012, 420.844012, 0.000000, X, Y) && !ellipse(27574.377014, 25802.099823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30127.405396, 26786.491760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27626.183000, 28483.610200, 334.445610, 334.445610, 0.000000, X, Y) && !ellipse(25950.000820, 27490.564400, 393.644011, 221.675206, 69.615000, X, Y) && !ellipse(25308.652008, 29614.514801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24685.006866, 25892.678802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28365.793457, 32595.671967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27260.164000, 28054.836000, 1214.640035, 1214.640035, 0.000000, X, Y) && !ellipse(29517.526581, 27696.322510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28510.848000, 27587.816000, 1277.368037, 1277.368037, 0.000000, X, Y)
[Mon Feb 27 09:50:54 2012] Writing fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src12.gif
[Mon Feb 27 10:00:58 2012] Mean detx,y = (2004.10, -3590.11) 
[Mon Feb 27 10:01:00 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 10:01:58 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 10:01:59 2012] Setting source spectrum file to fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Feb 27 10:01:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Mon Feb 27 22:00:39 2012] Updating aperture counts using extracted products
[Mon Feb 27 22:00:39 2012] Error reading totcts from fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Feb 27 22:00:44 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 22:00:44 2012] Using photon index=1.80, rate=0.0483, arf fullrun_mos1_xmm0505720501_pi300-10000_pass1_cl_src12.arf
[Mon Feb 27 22:00:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 22:00:45 2012] Updating source flux to 6.3e-13