[Tue May  8 11:38:21 2012] Detection parameters:
  Position = (367.6, 287.7) = 0 42 25.82 41 14 28.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.7 +/- 14.1
  Background counts = 97.3
  Rate = 0.006 +/- 0.001

[Tue May  8 11:38:24 2012] Off-axis axis estimate = 5.07'
[Tue May  8 11:46:40 2012] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Tue May  8 11:46:40 2012] Initial guess for spatial extent in simple fitting = 8.96"
[Tue May  8 11:46:40 2012] source mask rpix=2.1, npix_max = 26, mask sum = 16, frac = 0.610
[Tue May  8 11:46:40 2012] Giving source the simple spatial ID 96 for pass 0, mean size = 8.96"
[Wed May  9 03:34:26 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src96.ximg exists
[Wed May  9 03:34:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src96.csv
[Wed May  9 03:34:26 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src96_1.ximg exists
[Wed May  9 03:34:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src96.csv
[Wed May  9 03:34:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src96_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 03:34:28 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src96.ximg exists
[Wed May  9 03:34:28 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src96.csv
[Wed May  9 03:34:28 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src96_1.ximg exists
[Wed May  9 03:34:28 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src96.csv
[Wed May  9 03:34:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src96_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:42:25 2012] Warning: source 96 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 99 at 11.469036 pixels away
[Thu May 10 00:42:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:42:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:42:25 2012] Assessing source extent using major
[Thu May 10 00:42:25 2012] Source does appear to be extended
[Thu May 10 00:42:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:42:25 2012] Deleting source due to low Poisson probability 0.9