[Tue May  8 11:38:20 2012] Detection parameters:
  Position = (342.6, 293.0) = 0 42 35.46 41 14 54.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.6 +/- 23.3
  Background counts = 136.9
  Rate = 0.007 +/- 0.001

[Tue May  8 11:38:24 2012] Off-axis axis estimate = 3.22'
[Tue May  8 11:46:40 2012] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Tue May  8 11:46:40 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Tue May  8 11:46:40 2012] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.907
[Tue May  8 11:46:40 2012] Giving source the simple spatial ID 93 for pass 0, mean size = 8.04"
[Wed May  9 03:34:26 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src93.ximg exists
[Wed May  9 03:34:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src93.csv
[Wed May  9 03:34:26 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src93_1.ximg exists
[Wed May  9 03:34:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src93.csv
[Wed May  9 03:34:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src93_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 03:34:28 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src93.ximg exists
[Wed May  9 03:34:28 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src93_1.ximg exists
[Wed May  9 03:34:28 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src93 appears to have run properly
[Thu May 10 00:42:25 2012] Source 96 is offset by -4.487812 and -7.429403 pixels which is larger than
2 X fitted extent = 7.393150 x 7.393150, not incorporating fit results
[Thu May 10 00:42:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:42:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:42:25 2012] Assessing source extent using major
[Thu May 10 00:42:25 2012] Source does appear to be extended
[Thu May 10 00:42:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:42:25 2012] Source is confused with source 41
[Thu May 10 00:44:42 2012] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Thu May 10 00:44:42 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Thu May 10 00:44:42 2012] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.907
[Thu May 10 00:44:42 2012] Giving source the simple spatial ID 79 for pass 1, mean size = 8.04"
[Thu May 10 17:41:44 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src79.ximg exists
[Thu May 10 17:41:44 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src79_1.ximg exists
[Thu May 10 17:41:44 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src79 appears to have run properly
[Thu May 10 17:41:46 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src79.ximg exists
[Thu May 10 17:41:46 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists
[Thu May 10 17:41:46 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src79 appears to have run properly
[Fri May 11 08:46:09 2012] Warning, spatial fit 79 centroid is now closest to src. 46
[Fri May 11 08:46:09 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:46:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:46:09 2012] Assessing source extent using major
[Fri May 11 08:46:09 2012] Source does appear to be extended
[Fri May 11 08:46:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 08:47:50 2012] XMMSAS src. selection expression = ellipse(29753.638336, 25439.629913, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 11 08:47:50 2012] Writing source region out to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src96_src.reg
[Fri May 11 08:47:50 2012] Extracting stamp from image fullrun_pn_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (305, 255) - (380, 330)
[Fri May 11 08:47:50 2012] XMMSAS bgd. selection expression = annulus(29753.638336, 25439.629913, 1087.500000, 2175.000000, X, Y) && !ellipse(29016.687164, 26780.979919, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28243.794861, 28007.343262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27095.300873, 27268.870758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30069.902771, 27171.186920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30689.913177, 27187.366669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27710.288780, 26942.704400, 441.067213, 441.067213, 0.000000, X, Y) && !ellipse(29346.000940, 24939.416600, 415.632812, 415.632812, 0.000000, X, Y) && !ellipse(28173.392000, 25261.866000, 397.730411, 397.730411, 0.000000, X, Y) && !ellipse(32497.887238, 24550.237579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29082.816000, 24604.220000, 1230.488035, 1230.488035, 0.000000, X, Y) && !ellipse(28533.149200, 23712.110000, 384.152011, 384.152011, 0.000000, X, Y) && !ellipse(32654.504761, 23857.261658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30466.065002, 23444.545319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29790.049408, 27780.409943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29344.843475, 27404.091400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26870.905762, 24669.312988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32031.839325, 23947.336182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27563.292267, 24498.124664, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 11 08:47:50 2012] Writing fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src96.gif
[Fri May 11 12:52:14 2012] Mean detx,y = (2459.07, 161.10) 
[Fri May 11 12:52:20 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 12:52:57 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 12:52:58 2012] Setting source spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Fri May 11 12:52:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src96_bgd.pi.gz
[Sat May 12 05:09:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 12 05:09:05 2012] rmf not generated due to insufficient counts
[Sat May 12 14:51:29 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:29 2012] Error reading totcts from fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Sat May 12 14:51:35 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:35 2012] Using photon index=1.80, rate=0.00723, arf fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src96.arf
[Sat May 12 14:51:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:35 2012] Updating source flux to 1.7e-14
[Sat May 12 15:10:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting