[Tue May  8 11:38:19 2012] Detection parameters:
  Position = (403.0, 319.4) = 0 42 12.13 41 16 49.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 245.3 +/- 21.5
  Background counts = 47.2
  Rate = 0.02 +/- 0.002

[Tue May  8 11:38:24 2012] Off-axis axis estimate = 7.73'
[Tue May  8 11:46:40 2012] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Tue May  8 11:46:40 2012] Initial guess for spatial extent in simple fitting = 10.29"
[Tue May  8 11:46:40 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.095
[Tue May  8 11:46:40 2012] Giving source the simple spatial ID 89 for pass 0, mean size = 10.29"
[Wed May  9 03:34:26 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src89.ximg exists
[Wed May  9 03:34:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src89.csv
[Wed May  9 03:34:26 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src89_1.ximg exists
[Wed May  9 03:34:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src89.csv
[Wed May  9 03:34:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src89_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 03:34:28 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src89.ximg exists
[Wed May  9 03:34:28 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src89_1.ximg exists
[Wed May  9 03:34:28 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src89 appears to have run properly
[Thu May 10 00:42:25 2012] Warning, spatial fit 89 centroid is now closest to src. 87
[Thu May 10 00:42:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:42:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:42:25 2012] Assessing source extent using major
[Thu May 10 00:42:25 2012] Source does appear to be extended
[Thu May 10 00:42:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:44:42 2012] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Thu May 10 00:44:42 2012] Initial guess for spatial extent in simple fitting = 10.29"
[Thu May 10 00:44:42 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.095
[Thu May 10 00:44:42 2012] Giving source the simple spatial ID 75 for pass 1, mean size = 10.29"
[Thu May 10 17:41:44 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src75.ximg exists
[Thu May 10 17:41:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src75.csv
[Thu May 10 17:41:44 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src75_1.ximg exists
[Thu May 10 17:41:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src75.csv
[Thu May 10 17:41:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src75_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 17:41:46 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src75.ximg exists
[Thu May 10 17:41:46 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src75_1.ximg exists
[Thu May 10 17:41:46 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src75 appears to have run properly
[Fri May 11 08:46:09 2012] Spatial fit model total counts = 683.269000, observed total counts = 682.000000
[Fri May 11 08:46:09 2012] Offset between fit and detection position for source 91 = 0.203593 pixels
[Fri May 11 08:46:09 2012] 677.845000 total counts/ 517.984000 bgd. counts: snr = 7.023998
Spatial fit parameters:
  Offset between fit and detection position for source 91 = 0.203593 pixels
  Position = (402.8, 319.5) = 0 42 12.20 41 16 49.7
  Extent = 4.4 (3.9-5.2)", rotation angle = 0
  Source counts = 159.9 +/- 26.0
  Background counts = 518.0
  Rate = 0.008 +/- 0.001
[Fri May 11 08:46:09 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:46:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:46:09 2012] Assessing source extent using major axis lower bound
[Fri May 11 08:46:09 2012] Source does appear to be extended
[Fri May 11 08:46:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 08:47:50 2012] XMMSAS src. selection expression = ellipse(34997.326140, 27743.836400, 265.553408, 265.553408, 0.000000, X, Y)
[Fri May 11 08:47:50 2012] Writing source region out to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src91_src.reg
[Fri May 11 08:47:50 2012] Extracting stamp from image fullrun_pn_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (388, 304) - (418, 335)
[Fri May 11 08:47:50 2012] XMMSAS bgd. selection expression = annulus(34997.326140, 27743.836400, 442.589013, 885.178025, X, Y) && !ellipse(35960.204742, 29456.277710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34960.992432, 29166.595428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35549.847200, 28883.461800, 260.684808, 260.684808, 0.000000, X, Y) && !ellipse(34138.632620, 28383.560800, 409.987212, 409.987212, 0.000000, X, Y)
[Fri May 11 08:47:50 2012] Writing fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src91.gif
[Fri May 11 12:39:53 2012] Mean detx,y = (6139.68, -4349.56) 
[Fri May 11 12:39:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 12:40:23 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 12:40:24 2012] Setting source spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Fri May 11 12:40:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src91_bgd.pi.gz
[Sat May 12 14:51:29 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:29 2012] Error reading totcts from fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Sat May 12 14:51:35 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:35 2012] Using photon index=1.80, rate=0.00794, arf fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src91.arf
[Sat May 12 14:51:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:35 2012] Updating source flux to 3.5e-14