[Tue May  8 11:38:19 2012] Detection parameters:
  Position = (291.5, 328.0) = 0 42 55.15 41 17 29.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.7 +/- 22.5
  Background counts = 108.2
  Rate = 0.01 +/- 0.001

[Tue May  8 11:38:24 2012] Off-axis axis estimate = 2.20'
[Tue May  8 11:46:40 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Tue May  8 11:46:40 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Tue May  8 11:46:40 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.005
[Tue May  8 11:46:40 2012] Giving source the simple spatial ID 87 for pass 0, mean size = 7.53"
[Wed May  9 03:34:26 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src87.ximg exists
[Wed May  9 03:34:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src87.csv
[Wed May  9 03:34:26 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src87_1.ximg exists
[Wed May  9 03:34:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src87.csv
[Wed May  9 03:34:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 03:34:28 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src87.ximg exists
[Wed May  9 03:34:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src87.csv
[Wed May  9 03:34:28 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src87_1.ximg exists
[Wed May  9 03:34:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src87.csv
[Wed May  9 03:34:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src87_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:42:25 2012] Warning, spatial fit 87 centroid is now closest to src. 27
[Thu May 10 00:42:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:42:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:42:25 2012] Assessing source extent using major
[Thu May 10 00:42:25 2012] Source does appear to be extended
[Thu May 10 00:42:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:44:42 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Thu May 10 00:44:42 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Thu May 10 00:44:42 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.005
[Thu May 10 00:44:42 2012] Giving source the simple spatial ID 73 for pass 1, mean size = 7.53"
[Thu May 10 17:41:44 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src73.ximg exists
[Thu May 10 17:41:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src73.csv
[Thu May 10 17:41:44 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src73_1.ximg exists
[Thu May 10 17:41:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src73.csv
[Thu May 10 17:41:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 17:41:46 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Thu May 10 17:41:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src73.csv
[Thu May 10 17:41:46 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Thu May 10 17:41:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src73.csv
[Thu May 10 17:41:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:46:09 2012] Source 89 is offset by 1.064092 and 0.274080 pixels which is larger than
2 X fitted extent = 0.926432 x 0.926432, not incorporating fit results
[Fri May 11 08:46:09 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:46:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:46:09 2012] Assessing source extent using major
[Fri May 11 08:46:09 2012] Source does appear to be extended
[Fri May 11 08:46:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 08:46:09 2012] Source is confused with source 92
[Fri May 11 08:47:49 2012] XMMSAS src. selection expression = ellipse(25312.666412, 28487.016785, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 11 08:47:49 2012] Writing source region out to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src89_src.reg
[Fri May 11 08:47:49 2012] Extracting stamp from image fullrun_pn_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (254, 290) - (329, 365)
[Fri May 11 08:47:50 2012] XMMSAS bgd. selection expression = annulus(25312.666412, 28487.016785, 1087.500000, 2175.000000, X, Y) && !ellipse(29016.687164, 26780.979919, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24240.731100, 30744.536200, 417.707212, 417.707212, 0.000000, X, Y) && !ellipse(25884.809296, 30312.758301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25196.007080, 29876.194489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23304.660000, 29265.112400, 427.083212, 427.083212, 0.000000, X, Y) && !ellipse(27540.595140, 28748.590600, 465.684013, 465.684013, 0.000000, X, Y) && !ellipse(28243.794861, 28007.343262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26096.434000, 27287.024000, 1146.072033, 1146.072033, 0.000000, X, Y) && !ellipse(27095.300873, 27268.870758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27710.288780, 26942.704400, 441.067213, 441.067213, 0.000000, X, Y) && !ellipse(25303.944641, 26744.059082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24249.580000, 26798.260000, 635.284018, 205.886406, 110.941000, X, Y) && !ellipse(24578.771179, 26259.439240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25855.468800, 26359.339400, 364.104810, 364.104810, 0.000000, X, Y) && !ellipse(23469.961800, 26084.602200, 470.874414, 470.874414, 0.000000, X, Y) && !ellipse(26792.909800, 26039.576200, 538.040015, 538.040015, 0.000000, X, Y) && !ellipse(26778.964752, 29253.523743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26673.862762, 28811.317993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24772.568000, 27839.438000, 1151.376033, 758.405622, 293.271000, X, Y) && !ellipse(23166.547821, 26904.080353, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 11 08:47:50 2012] Writing fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src89.gif
[Fri May 11 12:37:29 2012] Mean detx,y = (-2819.11, -466.99) 
[Fri May 11 12:37:35 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 12:38:16 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 12:38:17 2012] Setting source spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src89_src_b10.pi.gz
[Fri May 11 12:38:17 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src89_bgd.pi.gz
[Sat May 12 04:50:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 12 04:50:32 2012] rmf not generated due to insufficient counts
[Sat May 12 14:51:29 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:29 2012] Error reading totcts from fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src89_src_b10.pi.gz
[Sat May 12 14:51:35 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:35 2012] Using photon index=1.80, rate=0.0101, arf fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src89.arf
[Sat May 12 14:51:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:35 2012] Updating source flux to 3.1e-14
[Sat May 12 15:10:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting