[Tue May  8 11:38:18 2012] Detection parameters:
  Position = (328.6, 330.8) = 0 42 40.84 41 17 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.3 +/- 21.5
  Background counts = 104.5
  Rate = 0.008 +/- 0.001

[Tue May  8 11:38:24 2012] Off-axis axis estimate = 3.21'
[Tue May  8 11:46:40 2012] Using EEF radius (= 8.03 ")to estimate initial spatial extent for simple fitting
[Tue May  8 11:46:40 2012] Initial guess for spatial extent in simple fitting = 8.03"
[Tue May  8 11:46:40 2012] source mask rpix=1.8, npix_max = 22, mask sum = 25, frac = 1.135
[Tue May  8 11:46:40 2012] Giving source the simple spatial ID 80 for pass 0, mean size = 8.03"
[Wed May  9 03:34:26 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src80.ximg exists
[Wed May  9 03:34:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src80.csv
[Wed May  9 03:34:26 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src80_1.ximg exists
[Wed May  9 03:34:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src80.csv
[Wed May  9 03:34:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 03:34:28 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src80.ximg exists
[Wed May  9 03:34:28 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists
[Wed May  9 03:34:28 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src80 appears to have run properly
[Thu May 10 00:42:25 2012] Spatial fit model total counts = 1806.150000, observed total counts = 1641.000000
[Thu May 10 00:42:25 2012] Poor agreement between spatial fit and data for source 82
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 10 00:42:25 2012] Warning, spatial fit 80 centroid is now closest to src. 79
[Thu May 10 00:42:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:42:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:42:25 2012] Assessing source extent using major
[Thu May 10 00:42:25 2012] Source does appear to be extended
[Thu May 10 00:42:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:44:42 2012] Using EEF radius (= 8.03 ")to estimate initial spatial extent for simple fitting
[Thu May 10 00:44:42 2012] Initial guess for spatial extent in simple fitting = 8.03"
[Thu May 10 00:44:42 2012] source mask rpix=1.8, npix_max = 22, mask sum = 25, frac = 1.135
[Thu May 10 00:44:42 2012] Giving source the simple spatial ID 69 for pass 1, mean size = 8.03"
[Thu May 10 17:41:44 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src69.ximg exists
[Thu May 10 17:41:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src69.csv
[Thu May 10 17:41:44 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src69_1.ximg exists
[Thu May 10 17:41:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src69.csv
[Thu May 10 17:41:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 17:41:46 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Thu May 10 17:41:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src69.csv
[Thu May 10 17:41:46 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Thu May 10 17:41:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src69.csv
[Thu May 10 17:41:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src69_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:46:09 2012] Warning: source 69 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 82 at 10.961288 pixels away
[Fri May 11 08:46:09 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:46:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:46:09 2012] Assessing source extent using major
[Fri May 11 08:46:09 2012] Source does appear to be extended
[Fri May 11 08:46:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 08:47:49 2012] XMMSAS src. selection expression = ellipse(28538.988983, 28733.676971, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 11 08:47:49 2012] Writing source region out to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src82_src.reg
[Fri May 11 08:47:49 2012] Extracting stamp from image fullrun_pn_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (291, 293) - (366, 368)
[Fri May 11 08:47:49 2012] XMMSAS bgd. selection expression = annulus(28538.988983, 28733.676971, 1087.500000, 2175.000000, X, Y) && !ellipse(29016.687164, 26780.979919, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(30666.769287, 31015.656067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25884.809296, 30312.758301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28624.372200, 30057.663800, 409.476812, 409.476812, 0.000000, X, Y) && !ellipse(27540.595140, 28748.590600, 465.684013, 465.684013, 0.000000, X, Y) && !ellipse(28243.794861, 28007.343262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26096.434000, 27287.024000, 1146.072033, 1146.072033, 0.000000, X, Y) && !ellipse(27095.300873, 27268.870758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30069.902771, 27171.186920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30689.913177, 27187.366669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27710.288780, 26942.704400, 441.067213, 441.067213, 0.000000, X, Y) && !ellipse(26792.909800, 26039.576200, 538.040015, 538.040015, 0.000000, X, Y) && !ellipse(26778.964752, 29253.523743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26673.862762, 28811.317993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29790.049408, 27780.409943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29344.843475, 27404.091400, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 11 08:47:49 2012] Writing fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src82.gif
[Fri May 11 12:32:41 2012] Mean detx,y = (-31.07, -2169.14) 
[Fri May 11 12:32:46 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 12:33:20 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 12:33:21 2012] Setting source spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Fri May 11 12:33:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src82_bgd.pi.gz
[Sat May 12 04:43:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 12 04:43:52 2012] rmf not generated due to insufficient counts
[Sat May 12 14:51:29 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:29 2012] Error reading totcts from fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Sat May 12 14:51:35 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:35 2012] Using photon index=1.80, rate=0.00808, arf fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src82.arf
[Sat May 12 14:51:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:35 2012] Updating source flux to 2.3e-14
[Sat May 12 15:10:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting