[Tue May  8 11:38:13 2012] Detection parameters:
  Position = (386.5, 258.5) = 0 42 18.54 41 12 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2129.5 +/- 55.5
  Background counts = 61.5
  Rate = 0.2 +/- 0.004

[Tue May  8 11:38:24 2012] Off-axis axis estimate = 7.01'
[Tue May  8 11:46:40 2012] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Tue May  8 11:46:40 2012] Initial guess for spatial extent in simple fitting = 9.93"
[Tue May  8 11:46:40 2012] source mask rpix=2.3, npix_max = 30, mask sum = 21, frac = 0.678
[Tue May  8 11:46:40 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 9.93"
[Wed May  9 03:34:25 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src54.ximg exists
[Wed May  9 03:34:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src54.csv
[Wed May  9 03:34:25 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src54_1.ximg exists
[Wed May  9 03:34:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src54.csv
[Wed May  9 03:34:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 03:34:28 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Wed May  9 03:34:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src54.csv
[Wed May  9 03:34:28 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Wed May  9 03:34:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src54.csv
[Wed May  9 03:34:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:42:24 2012] Spatial fit model total counts = 2558.460000, observed total counts = 2205.000000
[Thu May 10 00:42:24 2012] Poor agreement between spatial fit and data for source 56
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 10 00:42:25 2012] Warning, spatial fit 54 centroid is now closest to src. 54
[Thu May 10 00:42:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:42:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:42:25 2012] Assessing source extent using major
[Thu May 10 00:42:25 2012] Source does appear to be extended
[Thu May 10 00:42:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:44:42 2012] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Thu May 10 00:44:42 2012] Initial guess for spatial extent in simple fitting = 9.93"
[Thu May 10 00:44:42 2012] source mask rpix=2.3, npix_max = 30, mask sum = 21, frac = 0.678
[Thu May 10 00:44:42 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 9.93"
[Thu May 10 17:41:44 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src53.ximg exists
[Thu May 10 17:41:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src53.csv
[Thu May 10 17:41:44 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src53_1.ximg exists
[Thu May 10 17:41:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src53.csv
[Thu May 10 17:41:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 17:41:45 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Thu May 10 17:41:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src53.csv
[Thu May 10 17:41:45 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Thu May 10 17:41:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src53.csv
[Thu May 10 17:41:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 08:46:09 2012] Spatial fit model total counts = 2558.460000, observed total counts = 2205.000000
[Fri May 11 08:46:09 2012] Poor agreement between spatial fit and data for source 56
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 11 08:46:09 2012] Warning, spatial fit 53 centroid is now closest to src. 54
[Fri May 11 08:46:09 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:46:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:46:09 2012] Assessing source extent using major
[Fri May 11 08:46:09 2012] Source does appear to be extended
[Fri May 11 08:46:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 08:47:48 2012] Counts = 2129.451660, rescaling region sizes by 2.000000
[Fri May 11 08:47:48 2012] XMMSAS src. selection expression = ellipse(33575.470703, 22438.273285, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri May 11 08:47:48 2012] Writing source region out to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src56_src.reg
[Fri May 11 08:47:48 2012] Extracting stamp from image fullrun_pn_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (311, 183) - (461, 333)
[Fri May 11 08:47:48 2012] XMMSAS bgd. selection expression = annulus(33575.470703, 22438.273285, 4350.000000, 8700.000000, X, Y) && !ellipse(29016.687164, 26780.979919, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(30666.769287, 31015.656067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31847.782074, 30656.173065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25884.809296, 30312.758301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34730.639400, 30102.026000, 708.908820, 381.591211, 90.004000, X, Y) && !ellipse(25196.007080, 29876.194489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28624.372200, 30057.663800, 409.476812, 409.476812, 0.000000, X, Y) && !ellipse(31175.040131, 13090.448792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35960.204742, 29456.277710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34960.992432, 29166.595428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35549.847200, 28883.461800, 260.684808, 260.684808, 0.000000, X, Y) && !ellipse(27540.595140, 28748.590600, 465.684013, 465.684013, 0.000000, X, Y) && !ellipse(28243.794861, 28007.343262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26096.434000, 27287.024000, 1146.072033, 1146.072033, 0.000000, X, Y) && !ellipse(27095.300873, 27268.870758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30069.902771, 27171.186920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30689.913177, 27187.366669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27710.288780, 26942.704400, 441.067213, 441.067213, 0.000000, X, Y) && !ellipse(32859.111800, 26781.082800, 328.335209, 328.335209, 0.000000, X, Y) && !ellipse(25303.944641, 26744.059082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24249.580000, 26798.260000, 635.284018, 205.886406, 110.941000, X, Y) && !ellipse(24578.771179, 26259.439240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25855.468800, 26359.339400, 364.104810, 364.104810, 0.000000, X, Y) && !ellipse(32521.459800, 26259.738400, 377.520011, 377.520011, 0.000000, X, Y) && !ellipse(26792.909800, 26039.576200, 538.040015, 538.040015, 0.000000, X, Y) && !ellipse(29346.000940, 24939.416600, 415.632812, 415.632812, 0.000000, X, Y) && !ellipse(28173.392000, 25261.866000, 397.730411, 397.730411, 0.000000, X, Y) && !ellipse(32497.887238, 24550.237579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29082.816000, 24604.220000, 1230.488035, 1230.488035, 0.000000, X, Y) && !ellipse(33499.037800, 24402.631000, 386.816011, 386.816011, 0.000000, X, Y) && !ellipse(28533.149200, 23712.110000, 384.152011, 384.152011, 0.000000, X, Y) && !ellipse(32654.504761, 23857.261658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30466.065002, 23444.545319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34299.576843, 22586.184967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31323.739200, 22420.909800, 422.628012, 422.628012, 0.000000, X, Y) && !ellipse(27583.550140, 21524.688324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24636.706600, 20861.062200, 454.911213, 454.911213, 0.000000, X, Y) && !ellipse(35050.304962, 20560.191849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31343.995200, 19576.173000, 449.311213, 449.311213, 0.000000, X, Y) && !ellipse(26778.964752, 29253.523743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28538.988983, 28733.676971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26673.862762, 28811.317993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34138.632620, 28383.560800, 409.987212, 409.987212, 0.000000, X, Y) && !ellipse(25312.666412, 28487.016785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29790.049408, 27780.409943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34997.326140, 27743.836400, 354.071210, 354.071210, 0.000000, X, Y) && !ellipse(24772.568000, 27839.438000, 1151.376033, 758.405622, 293.271000, X, Y) && !ellipse(29344.843475, 27404.091400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29753.638336, 25439.629913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39640.707245, 25164.683044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25793.234680, 25013.436646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25688.546000, 24156.660000, 1118.776032, 1118.776032, 0.000000, X, Y) && !ellipse(26870.905762, 24669.312988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32031.839325, 23947.336182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27563.292267, 24498.124664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28525.405853, 20243.604828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32514.146637, 16749.182709, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 11 08:47:48 2012] Writing fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src56.gif
[Fri May 11 11:45:28 2012] Mean detx,y = (7301.40, 942.46) 
[Fri May 11 11:45:37 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 11:50:06 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 11:50:07 2012] Setting source spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Fri May 11 11:50:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Sat May 12 04:27:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 12 04:27:33 2012] rmf not generated due to insufficient counts
[Sat May 12 14:51:27 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:27 2012] Error reading totcts from fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Sat May 12 14:51:34 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:34 2012] Using photon index=1.80, rate=0.161, arf fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src56.arf
[Sat May 12 14:51:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:34 2012] Updating source flux to 5.3e-13
[Sat May 12 15:10:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting