[Tue May  8 11:38:13 2012] Detection parameters:
  Position = (360.6, 258.1) = 0 42 28.52 41 12 23.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3538.9 +/- 71.5
  Background counts = 87.3
  Rate = 0.2 +/- 0.005

[Tue May  8 11:38:24 2012] Off-axis axis estimate = 5.37'
[Tue May  8 11:46:40 2012] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting
[Tue May  8 11:46:40 2012] Initial guess for spatial extent in simple fitting = 9.11"
[Tue May  8 11:46:40 2012] source mask rpix=2.1, npix_max = 26, mask sum = 23, frac = 0.854
[Tue May  8 11:46:40 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 9.11"
[Wed May  9 03:34:25 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src53.ximg exists
[Wed May  9 03:34:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src53.csv
[Wed May  9 03:34:25 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src53_1.ximg exists
[Wed May  9 03:34:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src53.csv
[Wed May  9 03:34:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 03:34:28 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Wed May  9 03:34:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src53.csv
[Wed May  9 03:34:28 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Wed May  9 03:34:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src53.csv
[Wed May  9 03:34:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 00:42:24 2012] Warning, spatial fit 53 centroid is now closest to src. 105
[Thu May 10 00:42:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:42:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:42:25 2012] Assessing source extent using major
[Thu May 10 00:42:25 2012] Source does appear to be extended
[Thu May 10 00:42:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:44:42 2012] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting
[Thu May 10 00:44:42 2012] Initial guess for spatial extent in simple fitting = 9.11"
[Thu May 10 00:44:42 2012] source mask rpix=2.1, npix_max = 26, mask sum = 23, frac = 0.854
[Thu May 10 00:44:42 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 9.11"
[Thu May 10 17:41:44 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src52.ximg exists
[Thu May 10 17:41:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src52.csv
[Thu May 10 17:41:44 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src52_1.ximg exists
[Thu May 10 17:41:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src52.csv
[Thu May 10 17:41:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 17:41:45 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Thu May 10 17:41:45 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Thu May 10 17:41:45 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Fri May 11 08:46:09 2012] Source 55 is offset by 2.866345 and -5.197860 pixels which is larger than
2 X fitted extent = 0.966667 x 0.966667, not incorporating fit results
[Fri May 11 08:46:09 2012] Spatial fit model total counts = 4088.510000, observed total counts = 3806.000000
[Fri May 11 08:46:09 2012] Offset between fit and detection position for source 55 = 0.131354 pixels
[Fri May 11 08:46:09 2012] 4112.190000 total counts/ 1601.350000 bgd. counts: snr = 62.744535
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 0.131354 pixels
  Position = (360.6, 258.3) = 0 42 28.52 41 12 23.8
  Extent = 5.3 (5.1-5.5)", rotation angle = 0
  Source counts = 2510.8 +/- 64.1
  Background counts = 1601.3
  Rate = 0.1 +/- 0.003
[Fri May 11 08:46:09 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:46:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:46:09 2012] Assessing source extent using major axis lower bound
[Fri May 11 08:46:09 2012] Source does appear to be extended
[Fri May 11 08:46:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 08:47:48 2012] Counts = 2510.840000, rescaling region sizes by 2.000000
[Fri May 11 08:47:48 2012] XMMSAS src. selection expression = ellipse(31323.739200, 22420.909800, 633.942018, 633.942018, 0.000000, X, Y)
[Fri May 11 08:47:48 2012] Writing source region out to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src55_src.reg
[Fri May 11 08:47:48 2012] Extracting stamp from image fullrun_pn_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (324, 222) - (397, 295)
[Fri May 11 08:47:48 2012] XMMSAS bgd. selection expression = annulus(31323.739200, 22420.909800, 2113.140061, 4226.280122, X, Y) && !ellipse(29016.687164, 26780.979919, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26096.434000, 27287.024000, 1146.072033, 1146.072033, 0.000000, X, Y) && !ellipse(27095.300873, 27268.870758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30069.902771, 27171.186920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30689.913177, 27187.366669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27710.288780, 26942.704400, 441.067213, 441.067213, 0.000000, X, Y) && !ellipse(32859.111800, 26781.082800, 328.335209, 328.335209, 0.000000, X, Y) && !ellipse(32521.459800, 26259.738400, 377.520011, 377.520011, 0.000000, X, Y) && !ellipse(26792.909800, 26039.576200, 538.040015, 538.040015, 0.000000, X, Y) && !ellipse(29346.000940, 24939.416600, 415.632812, 415.632812, 0.000000, X, Y) && !ellipse(28173.392000, 25261.866000, 397.730411, 397.730411, 0.000000, X, Y) && !ellipse(32497.887238, 24550.237579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29082.816000, 24604.220000, 1230.488035, 1230.488035, 0.000000, X, Y) && !ellipse(33499.037800, 24402.631000, 386.816011, 386.816011, 0.000000, X, Y) && !ellipse(28533.149200, 23712.110000, 384.152011, 384.152011, 0.000000, X, Y) && !ellipse(32654.504761, 23857.261658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30466.065002, 23444.545319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34299.576843, 22586.184967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33575.470703, 22438.273285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27583.550140, 21524.688324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35050.304962, 20560.191849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31343.995200, 19576.173000, 449.311213, 449.311213, 0.000000, X, Y) && !ellipse(29344.843475, 27404.091400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29753.638336, 25439.629913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26870.905762, 24669.312988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32031.839325, 23947.336182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27563.292267, 24498.124664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28525.405853, 20243.604828, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 11 08:47:48 2012] Writing fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src55.gif
[Fri May 11 11:42:46 2012] Mean detx,y = (5363.62, 2060.90) 
[Fri May 11 11:42:53 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 11:44:54 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 11:44:55 2012] Setting source spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Fri May 11 11:44:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Sat May 12 14:51:27 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:27 2012] Error reading totcts from fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Sat May 12 14:51:34 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:34 2012] Using photon index=1.80, rate=0.125, arf fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src55.arf
[Sat May 12 14:51:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:34 2012] Updating source flux to 3.9e-13
[Sat May 12 15:10:29 2012] Flag b found in src. 55 procflags, skipping spectral fitting