[Tue May  8 11:38:11 2012] Detection parameters:
  Position = (324.3, 291.0) = 0 42 42.52 41 14 47.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1827.4 +/- 57.2
  Background counts = 146.4
  Rate = 0.1 +/- 0.003

[Tue May  8 11:38:24 2012] Off-axis axis estimate = 1.95'
[Tue May  8 11:46:40 2012] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Tue May  8 11:46:40 2012] Initial guess for spatial extent in simple fitting = 7.40"
[Tue May  8 11:46:40 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.825
[Tue May  8 11:46:40 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 7.40"
[Wed May  9 03:34:25 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src41.ximg exists
[Wed May  9 03:34:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src41.csv
[Wed May  9 03:34:25 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src41_1.ximg exists
[Wed May  9 03:34:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src41.csv
[Wed May  9 03:34:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 03:34:27 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Wed May  9 03:34:27 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Wed May  9 03:34:27 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Thu May 10 00:42:24 2012] Warning, spatial fit 41 centroid is now closest to src. 36
[Thu May 10 00:42:24 2012] Spatial fit model total counts = 5140.130000, observed total counts = 5135.000000
[Thu May 10 00:42:24 2012] Offset between fit and detection position for source 43 = 0.162828 pixels
[Thu May 10 00:42:24 2012] Warning, changing simple spatial fit ID from 41 to 44
[Thu May 10 00:42:24 2012] 5039.401000 total counts/ 4340.820000 bgd. counts: snr = 10.603052
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.162828 pixels
  Position = (324.4, 290.9) = 0 42 42.47 41 14 46.0
  Extent = 5.0 (4.5-5.7)", rotation angle = 0
  Source counts = 698.6 +/- 71.0
  Background counts = 4340.8
  Rate = 0.03 +/- 0.004
[Thu May 10 00:42:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:42:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:42:25 2012] Assessing source extent using major axis lower bound
[Thu May 10 00:42:25 2012] Source does appear to be extended
[Thu May 10 00:42:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:44:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 10 00:44:42 2012] Initial guess for spatial extent in simple fitting = 4.97"
[Thu May 10 00:44:42 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.111
[Thu May 10 00:44:42 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 4.97"
[Thu May 10 17:41:44 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src40.ximg exists
[Thu May 10 17:41:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src40.csv
[Thu May 10 17:41:44 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src40_1.ximg exists
[Thu May 10 17:41:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src40.csv
[Thu May 10 17:41:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 17:41:45 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Thu May 10 17:41:45 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Thu May 10 17:41:45 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Fri May 11 08:46:09 2012] Warning, spatial fit 40 centroid is now closest to src. 46
[Fri May 11 08:46:09 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:46:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:46:09 2012] Assessing source extent using major axis lower bound
[Fri May 11 08:46:09 2012] Source does appear to be extended
[Fri May 11 08:46:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 08:47:46 2012] XMMSAS src. selection expression = ellipse(28173.392000, 25261.866000, 298.297809, 298.297809, 0.000000, X, Y)
[Fri May 11 08:47:46 2012] Writing source region out to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src43_src.reg
[Fri May 11 08:47:46 2012] Extracting stamp from image fullrun_pn_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (307, 274) - (342, 308)
[Fri May 11 08:47:47 2012] XMMSAS bgd. selection expression = annulus(28173.392000, 25261.866000, 497.163014, 994.326029, X, Y) && !ellipse(29016.687164, 26780.979919, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26096.434000, 27287.024000, 1146.072033, 1146.072033, 0.000000, X, Y) && !ellipse(26792.909800, 26039.576200, 538.040015, 538.040015, 0.000000, X, Y) && !ellipse(29346.000940, 24939.416600, 415.632812, 415.632812, 0.000000, X, Y) && !ellipse(29082.816000, 24604.220000, 1230.488035, 1230.488035, 0.000000, X, Y) && !ellipse(29753.638336, 25439.629913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26870.905762, 24669.312988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27563.292267, 24498.124664, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 11 08:47:47 2012] Writing fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src43.gif
[Fri May 11 10:56:27 2012] Mean detx,y = (1242.69, 1011.12) 
[Fri May 11 10:56:32 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 10:57:00 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 10:57:01 2012] Setting source spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Fri May 11 10:57:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sat May 12 14:51:26 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:26 2012] Error reading totcts from fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat May 12 14:51:33 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:33 2012] Using photon index=1.80, rate=0.0347, arf fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src43.arf
[Sat May 12 14:51:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:33 2012] Updating source flux to 1e-13