[Tue May  8 11:38:10 2012] Detection parameters:
  Position = (270.4, 300.2) = 0 43 3.30 41 15 28.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5866.3 +/- 91.7
  Background counts = 89.8
  Rate = 0.4 +/- 0.006

[Tue May  8 11:38:24 2012] Off-axis axis estimate = 2.04'
[Tue May  8 11:46:40 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Tue May  8 11:46:40 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Tue May  8 11:46:40 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.022
[Tue May  8 11:46:40 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 7.45"
[Wed May  9 03:34:25 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src37.ximg exists
[Wed May  9 03:34:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src37.csv
[Wed May  9 03:34:25 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src37_1.ximg exists
[Wed May  9 03:34:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src37.csv
[Wed May  9 03:34:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 03:34:27 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Wed May  9 03:34:27 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Wed May  9 03:34:27 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Thu May 10 00:42:24 2012] Source 39 is offset by -0.956615 and -3.123669 pixels which is larger than
2 X fitted extent = 0.833154 x 0.833154, not incorporating fit results
[Thu May 10 00:42:24 2012] Spatial fit model total counts = 6747.470000, observed total counts = 6443.000000
[Thu May 10 00:42:24 2012] Offset between fit and detection position for source 39 = 0.181642 pixels
[Thu May 10 00:42:24 2012] 6825.560000 total counts/ 2557.690000 bgd. counts: snr = 84.389270
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.181642 pixels
  Position = (270.3, 300.4) = 0 43 3.33 41 15 27.1
  Extent = 5.9 (5.8-6.0)", rotation angle = 0
  Source counts = 4267.9 +/- 82.6
  Background counts = 2557.7
  Rate = 0.2 +/- 0.004
[Thu May 10 00:42:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:42:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:42:25 2012] Assessing source extent using major axis lower bound
[Thu May 10 00:42:25 2012] Source does appear to be extended
[Thu May 10 00:42:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:44:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 10 00:44:42 2012] Initial guess for spatial extent in simple fitting = 5.90"
[Thu May 10 00:44:42 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.870
[Thu May 10 00:44:42 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 5.90"
[Thu May 10 17:41:43 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src36.ximg exists
[Thu May 10 17:41:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src36.csv
[Thu May 10 17:41:43 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src36_1.ximg exists
[Thu May 10 17:41:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src36.csv
[Thu May 10 17:41:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 17:41:45 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Thu May 10 17:41:45 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Thu May 10 17:41:45 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Fri May 11 08:46:09 2012] Spatial fit model total counts = 6753.650000, observed total counts = 6443.000000
[Fri May 11 08:46:09 2012] Offset between fit and detection position for source 39 = 0.007177 pixels
[Fri May 11 08:46:09 2012] 6832.170000 total counts/ 2566.580000 bgd. counts: snr = 84.197987
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.007177 pixels
  Position = (270.3, 300.4) = 0 43 3.32 41 15 27.1
  Extent = 5.9 (5.8-6.0)", rotation angle = 0
  Source counts = 4265.6 +/- 82.7
  Background counts = 2566.6
  Rate = 0.2 +/- 0.004
[Fri May 11 08:46:09 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:46:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:46:09 2012] Assessing source extent using major axis lower bound
[Fri May 11 08:46:09 2012] Source does appear to be extended
[Fri May 11 08:46:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 08:47:46 2012] Counts = 4265.590000, rescaling region sizes by 2.000000
[Fri May 11 08:47:46 2012] XMMSAS src. selection expression = ellipse(23469.961800, 26084.602200, 706.311620, 706.311620, 0.000000, X, Y)
[Fri May 11 08:47:46 2012] Writing source region out to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src39_src.reg
[Fri May 11 08:47:46 2012] Extracting stamp from image fullrun_pn_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (230, 260) - (311, 341)
[Fri May 11 08:47:46 2012] XMMSAS bgd. selection expression = annulus(23469.961800, 26084.602200, 2354.372068, 4708.744135, X, Y) && !ellipse(29016.687164, 26780.979919, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24240.731100, 30744.536200, 417.707212, 417.707212, 0.000000, X, Y) && !ellipse(25884.809296, 30312.758301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25196.007080, 29876.194489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23304.660000, 29265.112400, 427.083212, 427.083212, 0.000000, X, Y) && !ellipse(27540.595140, 28748.590600, 465.684013, 465.684013, 0.000000, X, Y) && !ellipse(28243.794861, 28007.343262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26096.434000, 27287.024000, 1146.072033, 1146.072033, 0.000000, X, Y) && !ellipse(27095.300873, 27268.870758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27710.288780, 26942.704400, 441.067213, 441.067213, 0.000000, X, Y) && !ellipse(25303.944641, 26744.059082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24249.580000, 26798.260000, 635.284018, 205.886406, 110.941000, X, Y) && !ellipse(24578.771179, 26259.439240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25855.468800, 26359.339400, 364.104810, 364.104810, 0.000000, X, Y) && !ellipse(26792.909800, 26039.576200, 538.040015, 538.040015, 0.000000, X, Y) && !ellipse(21774.217270, 25374.722412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28173.392000, 25261.866000, 397.730411, 397.730411, 0.000000, X, Y) && !ellipse(29082.816000, 24604.220000, 1230.488035, 1230.488035, 0.000000, X, Y) && !ellipse(28533.149200, 23712.110000, 384.152011, 384.152011, 0.000000, X, Y) && !ellipse(19664.484400, 24091.374000, 459.724013, 459.724013, 0.000000, X, Y) && !ellipse(22216.291595, 22927.111969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27583.550140, 21524.688324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26778.964752, 29253.523743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28538.988983, 28733.676971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19412.000534, 28987.757965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26673.862762, 28811.317993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25312.666412, 28487.016785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24772.568000, 27839.438000, 1151.376033, 758.405622, 293.271000, X, Y) && !ellipse(23166.547821, 26904.080353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25793.234680, 25013.436646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25688.546000, 24156.660000, 1118.776032, 1118.776032, 0.000000, X, Y) && !ellipse(26870.905762, 24669.312988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27563.292267, 24498.124664, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 11 08:47:46 2012] Writing fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src39.gif
[Fri May 11 10:44:29 2012] Mean detx,y = (-3272.53, 2446.72) 
[Fri May 11 10:44:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 10:46:23 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 10:46:24 2012] Setting source spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Fri May 11 10:46:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sat May 12 14:51:26 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:26 2012] Error reading totcts from fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sat May 12 14:51:33 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:33 2012] Using photon index=1.80, rate=0.212, arf fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src39.arf
[Sat May 12 14:51:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:33 2012] Updating source flux to 6.6e-13
[Sat May 12 15:10:29 2012] Flag b found in src. 39 procflags, skipping spectral fitting