[Tue May  8 11:38:10 2012] Detection parameters:
  Position = (374.5, 302.3) = 0 42 23.13 41 15 35.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3394.3 +/- 71.2
  Background counts = 80.4
  Rate = 0.2 +/- 0.004

[Tue May  8 11:38:24 2012] Off-axis axis estimate = 5.52'
[Tue May  8 11:46:40 2012] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Tue May  8 11:46:40 2012] Initial guess for spatial extent in simple fitting = 9.19"
[Tue May  8 11:46:40 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.916
[Tue May  8 11:46:40 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 9.19"
[Wed May  9 03:34:25 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src36.ximg exists
[Wed May  9 03:34:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src36.csv
[Wed May  9 03:34:25 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src36_1.ximg exists
[Wed May  9 03:34:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src36.csv
[Wed May  9 03:34:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 03:34:27 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Wed May  9 03:34:27 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Wed May  9 03:34:27 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Thu May 10 00:42:24 2012] Spatial fit model total counts = 5571.690000, observed total counts = 5597.000000
[Thu May 10 00:42:24 2012] Offset between fit and detection position for source 38 = 0.181152 pixels
[Thu May 10 00:42:24 2012] 5896.600000 total counts/ 3933.640000 bgd. counts: snr = 31.297824
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.181152 pixels
  Position = (374.4, 302.4) = 0 42 23.19 41 15 35.7
  Extent = 4.7 (4.6-4.9)", rotation angle = 0
  Source counts = 1963.0 +/- 76.8
  Background counts = 3933.6
  Rate = 0.1 +/- 0.004
[Thu May 10 00:42:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:42:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:42:25 2012] Assessing source extent using major axis lower bound
[Thu May 10 00:42:25 2012] Source does appear to be extended
[Thu May 10 00:42:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:44:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 10 00:44:42 2012] Initial guess for spatial extent in simple fitting = 4.70"
[Thu May 10 00:44:42 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.902
[Thu May 10 00:44:42 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 4.70"
[Thu May 10 17:41:43 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src35.ximg exists
[Thu May 10 17:41:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src35.csv
[Thu May 10 17:41:43 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src35_1.ximg exists
[Thu May 10 17:41:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src35.csv
[Thu May 10 17:41:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 17:41:45 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Thu May 10 17:41:45 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Thu May 10 17:41:45 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Fri May 11 08:46:09 2012] Spatial fit model total counts = 5556.370000, observed total counts = 5597.000000
[Fri May 11 08:46:09 2012] Offset between fit and detection position for source 38 = 0.000816 pixels
[Fri May 11 08:46:09 2012] 5879.330000 total counts/ 3907.830000 bgd. counts: snr = 31.537622
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.000816 pixels
  Position = (374.4, 302.4) = 0 42 23.19 41 15 35.7
  Extent = 4.7 (4.6-4.9)", rotation angle = 0
  Source counts = 1971.5 +/- 76.7
  Background counts = 3907.8
  Rate = 0.1 +/- 0.004
[Fri May 11 08:46:09 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:46:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:46:09 2012] Assessing source extent using major axis lower bound
[Fri May 11 08:46:09 2012] Source does appear to be extended
[Fri May 11 08:46:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 08:47:46 2012] Counts = 1971.500000, rescaling region sizes by 2.000000
[Fri May 11 08:47:46 2012] XMMSAS src. selection expression = ellipse(32521.459800, 26259.738400, 566.280016, 566.280016, 0.000000, X, Y)
[Fri May 11 08:47:46 2012] Writing source region out to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src38_src.reg
[Fri May 11 08:47:46 2012] Extracting stamp from image fullrun_pn_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (342, 270) - (407, 335)
[Fri May 11 08:47:46 2012] XMMSAS bgd. selection expression = annulus(32521.459800, 26259.738400, 1887.600054, 3775.200109, X, Y) && !ellipse(29016.687164, 26780.979919, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(31847.782074, 30656.173065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34730.639400, 30102.026000, 708.908820, 381.591211, 90.004000, X, Y) && !ellipse(28624.372200, 30057.663800, 409.476812, 409.476812, 0.000000, X, Y) && !ellipse(35960.204742, 29456.277710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34960.992432, 29166.595428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35549.847200, 28883.461800, 260.684808, 260.684808, 0.000000, X, Y) && !ellipse(28243.794861, 28007.343262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30069.902771, 27171.186920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30689.913177, 27187.366669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32859.111800, 26781.082800, 328.335209, 328.335209, 0.000000, X, Y) && !ellipse(29346.000940, 24939.416600, 415.632812, 415.632812, 0.000000, X, Y) && !ellipse(32497.887238, 24550.237579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29082.816000, 24604.220000, 1230.488035, 1230.488035, 0.000000, X, Y) && !ellipse(33499.037800, 24402.631000, 386.816011, 386.816011, 0.000000, X, Y) && !ellipse(28533.149200, 23712.110000, 384.152011, 384.152011, 0.000000, X, Y) && !ellipse(32654.504761, 23857.261658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30466.065002, 23444.545319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34299.576843, 22586.184967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31323.739200, 22420.909800, 422.628012, 422.628012, 0.000000, X, Y) && !ellipse(33575.470703, 22438.273285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28538.988983, 28733.676971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34138.632620, 28383.560800, 409.987212, 409.987212, 0.000000, X, Y) && !ellipse(29790.049408, 27780.409943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34997.326140, 27743.836400, 354.071210, 354.071210, 0.000000, X, Y) && !ellipse(29344.843475, 27404.091400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29753.638336, 25439.629913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32031.839325, 23947.336182, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 11 08:47:46 2012] Writing fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src38.gif
[Fri May 11 10:42:38 2012] Mean detx,y = (4635.30, -1941.91) 
[Fri May 11 10:42:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 10:43:54 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 10:43:55 2012] Setting source spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Fri May 11 10:43:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Sat May 12 14:51:26 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:26 2012] Error reading totcts from fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sat May 12 14:51:33 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:33 2012] Using photon index=1.80, rate=0.0979, arf fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src38.arf
[Sat May 12 14:51:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:33 2012] Updating source flux to 3e-13