[Tue May  8 11:38:08 2012] Detection parameters:
  Position = (409.4, 332.8) = 0 42 9.63 41 17 46.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 399.7 +/- 27.1
  Background counts = 41.6
  Rate = 0.03 +/- 0.002

[Tue May  8 11:38:24 2012] Off-axis axis estimate = 8.42'
[Tue May  8 11:46:40 2012] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Tue May  8 11:46:40 2012] Initial guess for spatial extent in simple fitting = 10.64"
[Tue May  8 11:46:40 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.037
[Tue May  8 11:46:40 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 10.64"
[Wed May  9 03:34:24 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src22.ximg exists
[Wed May  9 03:34:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src22.csv
[Wed May  9 03:34:24 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src22_1.ximg exists
[Wed May  9 03:34:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src22.csv
[Wed May  9 03:34:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 03:34:27 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Wed May  9 03:34:27 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Wed May  9 03:34:27 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Thu May 10 00:42:24 2012] Source 23 is offset by -0.188687 and -2.556125 pixels which is larger than
2 X fitted extent = 1.202703 x 1.202703, not incorporating fit results
[Thu May 10 00:42:24 2012] Spatial fit model total counts = 3087.430000, observed total counts = 3084.000000
[Thu May 10 00:42:24 2012] Offset between fit and detection position for source 23 = 0.565603 pixels
[Thu May 10 00:42:24 2012] Warning, changing simple spatial fit ID from 22 to 20
[Thu May 10 00:42:24 2012] 3237.077000 total counts/ 3118.750000 bgd. counts: snr = 2.118818
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.565603 pixels
  Position = (409.7, 332.3) = 0 42 9.52 41 17 45.7
  Extent = 4.8 (3.9-5.6)", rotation angle = 0
  Source counts = 118.3 +/- 56.9
  Background counts = 3118.8
  Rate = 0.006 +/- 0.003
[Thu May 10 00:42:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:42:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:42:25 2012] Assessing source extent using major axis lower bound
[Thu May 10 00:42:25 2012] Source does appear to be extended
[Thu May 10 00:42:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:44:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 10 00:44:42 2012] Initial guess for spatial extent in simple fitting = 4.81"
[Thu May 10 00:44:42 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.873
[Thu May 10 00:44:42 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 4.81"
[Thu May 10 17:41:43 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src22.ximg exists
[Thu May 10 17:41:43 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src22_1.ximg exists
[Thu May 10 17:41:43 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src22 appears to have run properly
[Thu May 10 17:41:45 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Thu May 10 17:41:45 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Thu May 10 17:41:45 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Fri May 11 08:46:09 2012] Spatial fit model total counts = 2739.420000, observed total counts = 2712.000000
[Fri May 11 08:46:09 2012] Offset between fit and detection position for source 23 = 0.592629 pixels
[Fri May 11 08:46:09 2012] 2788.796000 total counts/ 2681.910000 bgd. counts: snr = 2.063948
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.592629 pixels
  Position = (409.2, 332.6) = 0 42 9.74 41 17 46.6
  Extent = 3.3 (2.9-3.8)", rotation angle = 0
  Source counts = 106.9 +/- 52.8
  Background counts = 2681.9
  Rate = 0.005 +/- 0.003
[Fri May 11 08:46:09 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:46:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:46:09 2012] Assessing source extent using major axis lower bound
[Fri May 11 08:46:09 2012] Source does appear to be extended
[Fri May 11 08:46:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 08:47:44 2012] XMMSAS src. selection expression = ellipse(35549.847200, 28883.461800, 195.513606, 195.513606, 0.000000, X, Y)
[Fri May 11 08:47:44 2012] Writing source region out to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src23_src.reg
[Fri May 11 08:47:44 2012] Extracting stamp from image fullrun_pn_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (398, 321) - (420, 344)
[Fri May 11 08:47:44 2012] XMMSAS bgd. selection expression = annulus(35549.847200, 28883.461800, 325.856009, 651.712019, X, Y) && !ellipse(34730.639400, 30102.026000, 708.908820, 381.591211, 90.004000, X, Y) && !ellipse(35960.204742, 29456.277710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34960.992432, 29166.595428, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 11 08:47:44 2012] Writing fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src23.gif
[Fri May 11 09:57:45 2012] Mean detx,y = (6106.32, -5612.05) 
[Fri May 11 09:57:51 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 09:58:14 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 09:58:15 2012] Setting source spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri May 11 09:58:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sat May 12 14:51:25 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:25 2012] Error reading totcts from fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat May 12 14:51:32 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:32 2012] Using photon index=1.80, rate=0.00531, arf fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src23.arf
[Sat May 12 14:51:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:32 2012] Updating source flux to 3.4e-14
[Sat May 12 15:10:29 2012] Flag b found in src. 23 procflags, skipping spectral fitting