[Tue May  8 11:38:08 2012] Detection parameters:
  Position = (413.9, 339.1) = 0 42 7.91 41 18 15.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1784.1 +/- 52.0
  Background counts = 39.0
  Rate = 0.1 +/- 0.004

[Tue May  8 11:38:24 2012] Off-axis axis estimate = 8.88'
[Tue May  8 11:46:40 2012] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Tue May  8 11:46:40 2012] Initial guess for spatial extent in simple fitting = 10.87"
[Tue May  8 11:46:40 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.001
[Tue May  8 11:46:40 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 10.87"
[Wed May  9 03:34:24 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src19.ximg exists
[Wed May  9 03:34:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src19.csv
[Wed May  9 03:34:24 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src19_1.ximg exists
[Wed May  9 03:34:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src19.csv
[Wed May  9 03:34:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 03:34:27 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Wed May  9 03:34:27 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Wed May  9 03:34:27 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Thu May 10 00:42:24 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 14.763486 pixels away
[Thu May 10 00:42:24 2012] Source 20 is offset by -4.891509 and -4.649291 pixels which is larger than
2 X fitted extent = 1.223085 x 1.223085, not incorporating fit results
[Thu May 10 00:42:25 2012] Warning: source 85 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 12.099042 pixels away
[Thu May 10 00:42:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 00:42:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 00:42:25 2012] Assessing source extent using major
[Thu May 10 00:42:25 2012] Source does appear to be extended
[Thu May 10 00:42:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 00:44:42 2012] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Thu May 10 00:44:42 2012] Initial guess for spatial extent in simple fitting = 10.87"
[Thu May 10 00:44:42 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.001
[Thu May 10 00:44:42 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 10.87"
[Thu May 10 17:41:43 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src19.ximg exists
[Thu May 10 17:41:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src19.csv
[Thu May 10 17:41:43 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src19_1.ximg exists
[Thu May 10 17:41:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src19.csv
[Thu May 10 17:41:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 17:41:45 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Thu May 10 17:41:45 2012] fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Thu May 10 17:41:45 2012] Fit fullrun_pn_xmm0505720401_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Fri May 11 08:46:09 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 13.612300 pixels away
[Fri May 11 08:46:09 2012] Vigneting correction estimate = 1.000000
[Fri May 11 08:46:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 11 08:46:09 2012] Assessing source extent using major
[Fri May 11 08:46:09 2012] Source does appear to be extended
[Fri May 11 08:46:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 08:47:44 2012] Counts = 1784.141479, rescaling region sizes by 2.000000
[Fri May 11 08:47:44 2012] XMMSAS src. selection expression = ellipse(35960.204742, 29456.277710, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri May 11 08:47:44 2012] Writing source region out to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src20_src.reg
[Fri May 11 08:47:44 2012] Extracting stamp from image fullrun_pn_xmm0505720401_pi300-10000_cl_sm2.00.img.gz, (339, 264) - (489, 414)
[Fri May 11 08:47:44 2012] XMMSAS bgd. selection expression = annulus(35960.204742, 29456.277710, 4350.000000, 8700.000000, X, Y) && !ellipse(29016.687164, 26780.979919, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(31832.244843, 38599.181732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32201.214264, 36399.402344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35690.990082, 32552.838379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29746.053600, 31680.450600, 409.197612, 409.197612, 0.000000, X, Y) && !ellipse(30666.769287, 31015.656067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31847.782074, 30656.173065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34730.639400, 30102.026000, 708.908820, 381.591211, 90.004000, X, Y) && !ellipse(28624.372200, 30057.663800, 409.476812, 409.476812, 0.000000, X, Y) && !ellipse(34960.992432, 29166.595428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35549.847200, 28883.461800, 260.684808, 260.684808, 0.000000, X, Y) && !ellipse(27540.595140, 28748.590600, 465.684013, 465.684013, 0.000000, X, Y) && !ellipse(28243.794861, 28007.343262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27095.300873, 27268.870758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30069.902771, 27171.186920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30689.913177, 27187.366669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27710.288780, 26942.704400, 441.067213, 441.067213, 0.000000, X, Y) && !ellipse(32859.111800, 26781.082800, 328.335209, 328.335209, 0.000000, X, Y) && !ellipse(32521.459800, 26259.738400, 377.520011, 377.520011, 0.000000, X, Y) && !ellipse(26792.909800, 26039.576200, 538.040015, 538.040015, 0.000000, X, Y) && !ellipse(29346.000940, 24939.416600, 415.632812, 415.632812, 0.000000, X, Y) && !ellipse(28173.392000, 25261.866000, 397.730411, 397.730411, 0.000000, X, Y) && !ellipse(32497.887238, 24550.237579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29082.816000, 24604.220000, 1230.488035, 1230.488035, 0.000000, X, Y) && !ellipse(33499.037800, 24402.631000, 386.816011, 386.816011, 0.000000, X, Y) && !ellipse(28533.149200, 23712.110000, 384.152011, 384.152011, 0.000000, X, Y) && !ellipse(32654.504761, 23857.261658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30466.065002, 23444.545319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34299.576843, 22586.184967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31323.739200, 22420.909800, 422.628012, 422.628012, 0.000000, X, Y) && !ellipse(33575.470703, 22438.273285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27583.550140, 21524.688324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35050.304962, 20560.191849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30044.974701, 33711.591400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34211.854675, 32108.636047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26778.964752, 29253.523743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28538.988983, 28733.676971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26673.862762, 28811.317993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34138.632620, 28383.560800, 409.987212, 409.987212, 0.000000, X, Y) && !ellipse(29790.049408, 27780.409943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34997.326140, 27743.836400, 354.071210, 354.071210, 0.000000, X, Y) && !ellipse(29344.843475, 27404.091400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29753.638336, 25439.629913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39640.707245, 25164.683044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26870.905762, 24669.312988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32031.839325, 23947.336182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27563.292267, 24498.124664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28525.405853, 20243.604828, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 11 08:47:44 2012] Writing fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src20.gif
[Fri May 11 09:48:23 2012] Mean detx,y = (5801.86, -6084.10) 
[Fri May 11 09:48:31 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 09:55:05 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 09:55:06 2012] Setting source spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Fri May 11 09:55:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Fri May 11 18:18:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 11 18:18:18 2012] rmf not generated due to insufficient counts
[Sat May 12 14:51:25 2012] Updating aperture counts using extracted products
[Sat May 12 14:51:25 2012] Error reading totcts from fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat May 12 14:51:32 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 12 14:51:32 2012] Using photon index=1.80, rate=0.147, arf fullrun_pn_xmm0505720401_pi300-10000_pass1_cl_src20.arf
[Sat May 12 14:51:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 12 14:51:32 2012] Updating source flux to 5e-13
[Sat May 12 15:10:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting